Post on 04-Apr-2018
7/29/2019 Catlogo PCB
1/8
PCB Terminal Blocks
Product Overview
7/29/2019 Catlogo PCB
2/8
Universal connection with@PECIAL
Handling:Open clamping unit, insert theconductor, release clamp done!Terminate both solid and
ferruled conductors by simplypushing them in no operatingtool needed.
PUSH WIRE connection forsolid and stranded conductors(depending on product used)
Handling:Tool-free, twist-free terminationsfor solid and rigid stranded con-
ductors simply push into unit.
Insulation DisplacementConnection (IDC)
Handling:Insert unstripped conductorinto the IDC contact using anoperating tool.
The Entire Range at a GlanceTypes: Terminal blocks, terminal strips (double-, triple-, quadruple-deck terminal strips),
disconnect terminal blocks for test and measurement, fuse terminal blocks,PCB female connectors, modular terminal blocks with commoning option.
Pin spacings: 2.5 20 mm (0.098 0.787 in)
PCB mounting styles: Through-hole technology (THT), through-hole reflow (THR) and press-in technology.
Conductor types: Solid, stranded, fine-stranded and ferruled conductors.
Conductor sizes: 0.08 16 mm2 (AWG 28 6)
Conductor entry angles: 0, 30, 40, 45 and 90
Termination and actuation options: Push-in termination, actuation via screwdriver, push-buttons,finger-operated levers and locking slides, as well as lever actuation.
Connection technologies and handling:
Universal connection forsolid, stranded and fine-stranded conductors
Handling:Open clamping unit, insert theconductor, release clamp
done!
RoHS compliant
!" $ %
7/29/2019 Catlogo PCB
3/8
Wave soldering is the most popular method for soldering PCBs.WAGO offers a wide range of terminal blocks with various pin spacings.
Through-Hole Technology
Reflow soldering is the standard method for soldering SMD components.WAGO THR products can be placed together with SMD components andsoldered during the same reflow soldering process.
Through-Hole Reflow
Press-in means pin connection without additional soldering process.Special press-in pins ensure both low press-in forces and high retentionforces in WAGO PCB terminal blocks. Elastic press-in pins protect thePCBs and ensure a good contact point.
Press-In
Colors: black, dark gray, gray,light gray, red, orange, green, brown, blue
The availability of these, and other colors,depends on series and quantity required.
7/29/2019 Catlogo PCB
4/8
PCB Terminal Blocks
2.5 mm, 2.54 mm 3.5 mm, 3.81 mm 3.96/4 mm
233 Series 739 Series 739 Series
0.08 0.5 mm2/ AWG 28 20 0.08 1.5 mm2/ AWG 28 14 0.08 1.5 mm2/ AWG 28 14
233-105 739-305 739-312/100-000
218 Series
0.08 0.5 mm2/ AWG 28 20
218-104
218 Series
0.08 0.5 mm2/ AWG 28 20
218-104/000-604
233 Series 235 Series 805 Series 235 Series
0.08 0.5 mm2/ AWG 28 20 0.5 1.5 mm2/ AWG 20 16 0.2 1.5 mm2/ AWG 24 16 0.5 1.5 mm2/ AWG 20 16
233-205 235-105 805-106 235-205
234 Series 250 Series 250 Series
0.08 0.5 mm2/ AWG 28 20 0.2 1.5 mm2/ AWG 24 16 0.2 1.5 mm2/ AWG 24 16
234-208 250-105 250-206/353-604
250 Series 251 Series 235 Series
0.08 0.5 mm2/ AWG 24 20 0.51.0/1.5mm2/AWG 2018/16 0.5 2 1.5 mm2/ AWG 20 16
250-412 251-107 and 251-303 sol. 235-105/330-000 sol.
250 Series 744 Series 735 Series
0.08 0.5 mm2/ AWG 24 20 0.5 2 1.5 mm2/ AWG 20 16 0.5 2 1.5 mm2/ AWG 20 16
250-406/350-604 744-204 sol. 735-127 sol.
Ex e II approval Through-hole reflow solderingPress-in technology only available in this pin spacing
THR
THR
THR
4 THR
2.5
3.81 3.5
3.81
3.81
3.5
3.5
3.5
3.5
"
"
"
"
"
!
!
!
!!
$
%
" "
!
$$
$
!
7/29/2019 Catlogo PCB
5/8
7.5 m
236 Series 745 Series
0.08 2.5 mm2/ AWG 28 12* 0.08 4 m
236-503 745-3153
739 Series 739 Series
0.08 2.5 mm2/ AWG 28 12* 0.08 2.5
739-206 739-206/10
745 Series 745 Series
0.2 4 mm2/ AWG 28 12 0.2 6 mm2
745-154 745-304
736 Series 737 Series
0.08 2.5 mm2/ AWG 28 12* 0.08 2.5
736-505 737-506
255 Series 256 Series
0.08 2.5 mm2/ AWG 28 12* 0.08 2.5
255-504 256-503
235 Series 250 Series
0.5 1.5 mm2/ AWG 20 14 0.5 1.5 m
235-503/331-000 250-606
235 Series 254 Series
0.5 2.5 mm2/ AWG 20 14 0.5 2.5 m
235-503 sol. 254-554
Feedthrough terminal blocks,741 Series
0.08 2.5 mm2/ AWG 28 12*
741-306
Product Overview Sorted by Pin Spacing
5 mm, 5.08 mm
36 Series 236 Series 745 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 4 mm2/ AWG 28 12
36-404 236-406/334-604 745-3104
39 Series 739 Series 740 Series 816 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 2 x 0.21.5 mm2/ 2 x AWG 2416
39-112 739-112/100-000 740-105 816-105
isconnect terminal blocks for testnd measurement,42 Series
Terminal blocks with jumper slot,742 Series
Fuse terminal blocks,742 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
42-101 742-121 742-116
36 Series 737 Series 738 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
36-106 737-106 738-108
55 Series 256 Series 257 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
55-405 256-405 257-405
35 Series 250 Series 250 Series 804 Series
5 1.5 mm2/ AWG 20 14 0.5 1.5 mm2/ AWG 20 14 2 x 0.5 1.5 mm2/ AWG 20 14 0.2 2.5 mm2/ AWG 28 12
35-405/331-000 250-513 250-704 804-105
35 Series 254 Series 253 Series 735 Series
5 2.5 mm2/ AWG 20 14 0.5 2,5 mm2/ AWG 20 12* 2 x 0.51.5 mm2/ 2 x AWG 2016 0.5 1.5 mm2/ AWG 20 16
35-405 sol. 254-455 sol. 253-105 sol. 735-307 sol.
eedthrough terminal blocks,41 Series
Feedthrough terminal blocks,231 Series
08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
41-112 231-612/023-000
Universal connection for solid, stranded and fine-stranded conductorsHandling: Open clamping unit, insert the conductor, release clamp done!
jumper slot *AWG 12: THHN, THWN
THR
4 4 4
4 4 4
4
4
5 5
5 5
5 5 5
5 5
7.5
"
"
!
$
"
$
!
" "
"" "
$
!
$
" "
" " "
" "
"
"
"
!
"
$
"
"
" "
!
!
"
7/29/2019 Catlogo PCB
6/8
7.62 mm 10 mm, 10.16 mm
236 Series 745 Series
WG 28 12 0.08 2.5 mm2/ AWG 28 12* 0.08 4 mm2/ AWG 28 12
235-603 745-3202
746 Series 745 Series
AWG 28 12* 2 x 0.510 mm2/ 2 x AWG 20 8 0.2 6 mm2/ AWG 24 10
746-2305 745-1354
745 Series 745 Series 745 Series
G 24 10 0.08 4 mm2/ AWG 28 12 0.2 6 mm2/ AWG 24 10 0.2 16 mm2/ AWG 24 6
745-204 745-354 745-504/006-000
736 Series 737 Series
AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
736-706 737-704
257 Series 255 Series 256 Series 257 Series
AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12* 0.08 2.5 mm2/ AWG 28 12*
257-554 255-602 256-602 257-653
804 Series 235 Series 2716 Series 2716 Series
WG 20 14 0.2 2.5mm2/ AWG 28 12 0.5 1.5 mm2/ AWG 20 14 1.5 16 mm2/ AWG 16 6 1.5 16 mm2/ AWG 16 6
804-305 235-802/331-000 2716-104 2716-154
235 Series 254 Series
WG 20 12* 0.5 2.5 mm2/ AWG 20 14 0.5 2.5 mm2/ AWG 20 12
sol. 235-802 sol. 254-654 sol.
Feedthrough terminal blocks,741 Series
0.08 2.5 mm2/ AWG 28 12*
741-505
12.
745 Series
0.08 4 mm2/
745-3254
745 Series
0.2 6 mm2/
745-1404
Universal connection with @PECIALHandling: Open clamping unit, insert the conductor, release clamp done!Terminate both solid and ferruled conductors by simply pushing them in no operating tool needed.
PUSH WIRE termination for solid anHandling: Tool-free, twist-free termination
4
4 4 4 4 4
4
44
4
4
44
7.5
7.5
7.5
7.5 7.5
10
10
10 10 10
10 10
!"
$
!
$
" "" ""
"
"
!
" "
! "
$
" "
""
"
"
"
"
"
$
7/29/2019 Catlogo PCB
7/8
m 15 mm 20 mm Female connectors
745 Series 252 Series
28 12 0.2 6 mm2/ AWG 24 10 2 x 0.40.8 mm /2 x AWG 2620
745-1454 252-105 sol.
252 Series
24 10 2 x 0.40.8 mm /2 x AWG 2620
252-155 sol.
745 Series 745 Series 243 Series
0.2 16 mm2/ AWG 24 6 0.2 16 mm2/ AWG 24 6 4 x 0.40.8 mm /4 x AWG 2418
745-603/006-000 745-653/006-000 243-743 sol.
806 Series
2 x 0.21.5mm2/ 2 x AWG 2416
806-106
2716 Series
1.5 16 mm2/ AWG 16 6
2716-204
2716 Series
1.5 16 mm2/ AWG 16 6
2716-254
nded conductors (depending on product used)olid and rigid stranded conductors simply push into unit.
Insulation Displacement Connection (IDC)Handling: Insert unstripped conductor into the IDC contact using an operating tool.
4
4
4
4
4
3.5
3.5
5
5.75
" "
"
"
"
"
$
$
$
!
"
%
7/29/2019 Catlogo PCB
8/8
51230818
0888-0
140/0300-3
60
1PCBTerminalBlocks3.0
GB2/10PPrintedin
GermanySubjecttodesignchanges
WAGO Kontakttechnik GmbH & Co. KGPO Box 2880 32385 MindenHansastrae 27 32423 Minden
Phone:Head Office +49 (0)571/887 - 0Sales +49 (0)571/887 - 222Order Service +49 (0)571/887 - 333Technical Support +49 (0)571/887 - 555
Fax: +49 (0)571/887 - 169
E-mail: info@wago.comInternet: www.wago.com