Post on 27-Oct-2018
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Features• Compact Design• Advanced LED technology provides superior
current draw performance• Lower power consumption per device allows
for more notification appliances per circuit and reduces the need for external power supplies
• Standard and High candela settings in one unit to meet virtually any application - 15, 15/75, 30, 75, 110, 185 cd
• Multiple field-selectable audible settings - Temporal, Continuous, March Time and 20
BPM audible tones - High and Low volume settings
• Red or white finish• Device settings are located on the back of the
unit to prevent tampering• Includes shorting clip that allows installers to test
the wiring before the device is installed• Supports 12 to 22 AWG• Mount to Mircom BB-400 surface mount back
box, single gang, 4-inch square, double gang, octagon and 4-inch junction boxes
• All units include universal mounting plate• For indoor applications
WALL MOUNT LED HORN/STROBES FHS-400
5275NOT TO BE USED FOR INSTALLATION PURPOSES.
CATALOG NUMBER
DescriptionMircom’s FHS-400 wall mount horn/strobes offer an audible/visual solution that delivers exceptional energy efficiency in a compact design. Utilizing advanced LED technology, the FHS-400 LED horn/strobes provide a lower current draw which allows for more devices on a NAC circuit while reducing the number of external power supplies required. The FHS-400 horn/strobes offer a wide range of audible/visual settings in a single compact device. The audible settings include Temporal, Continuous, March Time and 20 BPM tones that can each be set for Low or High volume settings. The candela settings can be field-configured for 15, 15/75, 30, 75, 110, 185 cd. The candela setting is displayed through the front window for easy identification All device settings are located on the back of the unit to prevent tampering.The FHS-400 horn/strobes can be synchronized using a control panel with the Mircom sync protocol or the SDM-240 synchronization module. The FHS-400 horn/strobes utilize a universal mounting plate that allows for mounting to a single gang, double gang, octagon, 4” junction or 4” square electrical box. The back plate allows the installer to mount the plate and connect the wire connections. The device attaches to the mounting plate and is secured by a single mounting screw. In addition, the FHS-400 can mount to the Mircom BB-400 Series back box for surface mount applications. S5375 S5375
Compliance• UL 1971• UL 1638• UL 464• ULC-S525• ULC-S526• NFPA 72 2016 Edition
7125-1477:0501
CAT. 5275page 2 of 4NOT TO BE USED FOR INSTALLATION PURPOSES.
Engineering SpecificationsThe horn/strobe shall be a Mircom FHS-400 notification appliance for wall mount applications. The horn/strobe shall be of a low current draw design and operate at 24 VDC regulated or full wave rectified. The horn/strobe shall have two field selectable volume settings and a choice of four tone settings for temporal, continuous, march time or 20 BPM. The horn/strobe shall incorporate a Light Emitting Diode (LED) as the light source and have six field selectable settings of 15, 15/75, 30, 75, 110, 185 candela. The candela settings shall show the candela selection in a visible location at all times when installed. Both the audible and candela settings shall be tamper resistant. The horn/strobe shall be synchronized using a control panel with the Mircom sync protocol or the SDM-240 sync module. The horn/strobe shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The mounting plate shall mount on a single gang, double gang, octagon, 4-inch square box or Mircom’s BB-400 series back box. The horn/strobe shall be listed to UL standard 464, Audible Signaling Devices for Fire Alarm and Signaling Devices, UL standard 1638, Visible Signaling Devices for Fire Alarm and Signaling Systems and standard 1971, Signaling Devices for the Hearing Impaired. In addition, the horn/strobe shall be listed to ULC-S525, Audible Signal Devices for Fire Alarm Systems and ULC S526, Visible Signal Devices for Fire Alarm Systems.
FHS-400 Dimensions
Knockout dimensions: 1 1⁄16” (27 mm)1 51⁄64”
(46 mm)
4 27⁄32” (123 mm)
4 27⁄32” (123 mm)
BB-400 Dimensions
Candela setting switch
DIP switches for the volume and signal rate
Audible/Visual Settings
Device settings are located on the back of the unit to prevent tampering
4 27⁄32” (123 mm)
4 27⁄32” (123 mm)
Height and width(all models)
1 35⁄64” (40 mm)
Horn(FH-400)
1 ¾” (44 mm)
1 61⁄64” (50 mm)
Ceiling Mount Strobes& Horn/Strobes
(FS-400C & FHS-400C)
Wall Mount Strobes& Horn/Strobes
(FS-400 & FHS-400)
4 39⁄64” (117 mm)
4 37⁄64” (120 mm)
Mounting Plate
4 27⁄32” (123 mm)
4 27⁄32” (123 mm)
Height and width(all models)
1 35⁄64” (40 mm)
Horn(FH-400)
1 ¾” (44 mm)
1 61⁄64” (50 mm)
Ceiling Mount Strobes& Horn/Strobes
(FS-400C & FHS-400C)
Wall Mount Strobes& Horn/Strobes
(FS-400 & FHS-400)
4 39⁄64” (117 mm)
4 37⁄64” (120 mm)
Mounting Plate
4 27⁄32” (123 mm)
4 27⁄32” (123 mm)
Height and width(all models)
1 35⁄64” (40 mm)
Horn(FH-400)
1 ¾” (44 mm)
1 61⁄64” (50 mm)
Ceiling Mount Strobes& Horn/Strobes
(FS-400C & FHS-400C)
Wall Mount Strobes& Horn/Strobes
(FS-400 & FHS-400)
4 39⁄64” (117 mm)
4 37⁄64” (120 mm)
Mounting Plate
CAT. 5275page 3 of 4NOT TO BE USED FOR INSTALLATION PURPOSES.
SpecificationsFHS-400 Wall Horn/Strobe Operating RMS Currents (mA)
Candela
Regulated 24 VDC Regulated 24 VFWRTemporal
Tone,High
Volume*
Continuous Tone,
High Volume
Temporal Tone,High
Volume*
Continuous Tone,
High Volume
15 30 47 69 73
30 44 53 99 102
75 103 106 189 194
15/75 107 97 190 196
110 107 111 190 199
185 180 183 236 243
* Temporal tone volume is representative of March and 20 BPM rates as well.
ULC Directional Sound CharacteristicsHorizontal Axis
± 45° -3 dbA
± 61° -6 dbA
± 90° -10 dbA
Vertical Axis
± 49° -3 dbA
± 61° -6 dbA
± 90° -7.7 dbA
Light Output Dispersion
Degrees% of Candela Rating
Horizontal Dispersion
Vertical Dispersion,Wall to Floor
±0 149 148
±5 146 149
±10 143 153
±15 138 135
±20 134 104
±25 128 101
±30 123 94
±35 116 92
±40 106 84
±45 99 75
±50 92 68
±55 87 65
±60 82 61
±65 78 58
±70 75 54
±75 73 49
±80 72 43
±85 81 40
±90 53 30
Compound ±45° 42Note: The values are shown as percentages of the rated light output at any candela setting.
Audible Ratings
dBA Reverberant Ratings per UL464 (dBA@10 ft)
SoundPattern Volume 16
VDC
Reg.24
VDC
33VDC
16 FWR
Reg.24
FWR
33 FWR
TemporalHigh 82.2 84.9 84.6 76.8 79 80
Low 75.5 80.5 80.2 71.8 75.1 76.6
ContinuousHigh 86.4 89.2 88.7 81.5 83.1 84
Low 79.9 84 84.8 76.2 79.3 81.2
20 BPMHigh 79 81.3 81.6 74 75.1 76.1
Low 72.3 76 76.7 68.9 71.7 73.3
MarchHigh 83.2 86.4 85.7 79.2 80.6 81.4
Low 76.9 80.9 81.7 73.3 76.2 78
dBA Anechoic Ratings per CAN/ULC-S525 (dBA@3 m)
SoundPattern Volume 16
VDC
Reg.24
VDC
33VDC
16 FWR
Reg.24
FWR
33 FWR
TemporalHigh 90.2 93.2 93.2 84.4 87.1 88.5
Low 83.7 87.4 88.3 78 82.2 84.5
ContinuousHigh 90.2 93.2 93.3 85.1 87.8 89
Low 83.8 87.6 88.6 78.5 83 85
20 BPMHigh 90.3 92.9 92.9 84.4 87.2 88.6
Low 83.6 87.3 88.3 78 82.2 84.5
MarchHigh 90.2 92.9 92.9 84.4 87.1 88.4
Low 83.7 87.4 88.3 78 82.2 84.4
General SpecificationsOperating temperature 0°C to 50°C (32°F to 122°F)
Humidity range 0% to 93%
Strobe flash rate 1 Hz
Nominal Voltage Regulated 24 VDC / 24 VFWR
Operating Voltage Range (RMS)
16 to 33
Input terminal wire gauge 22 AWG to 12 AWG
Installation environment For indoor use only
Canada25 Interchange WayVaughan, Ontario L4K 5W3Telephone: (905) 660-4655Fax: (905) 660-4113
Web page: http://www.mircom.com Email: mail@mircom.com
Distributed by:
CAT. 5275Rev. 0
NOT TO BE USED FOR INSTALLATION PURPOSES.
U.S.A.4575 Witmer Industrial EstatesNiagara Falls, NY 14305Toll Free: (888) 660-4655Fax Toll Free: (888) 660-4113
Ordering InformationModel Number DescriptionFHS-400-RR Wall Mount Horn/Strobe, Red
FHS-400-WW Wall Mount Horn/Strobe, White
BB-400R Surface Mount Back Box, Red
BB-400W Surface Mount Back Box, White
SDM-240 Synchronization Module