1

By: The Incredibles

The Rio RacerAges 7 +

2

What you will need:

3

Put yellow pole into the green snaps.

4

Next grab the yellow piece with 2 prongs on each side, and put the previous built piece on the right side.

5

Place the light green 2 prong piece on top of the dark greenpiece on the right hand side.

6

Place the 4 prong yellow piece on top of the light green piece.

Only 2 prongs will fit; 2 prongs will hang over the pole.

7

Place the yellow ‘L’ piece on the left side of the base.

8

Take the yellow piece with the hole in the middle on top of the piece just placed on the left side.

9

Place the remaining dark green piece on the right side of the base.

Only 1 row of pegs should be unconnected from the yellowpiece underneath.

10

Put the light green 2 pronged rounded piece on the second row of the dark green piece on the right.

11

Take the light green triangle piece and place it on the remaining 2 prongs of the dark green rectangle.

Triangle slope should be facing the right of the base.

12

Next place one of the round light green pieces onto the yellow pole. Repeat step so both round pieces are on both sides of the pole.

13

Using the ‘antennae’ pieces, place one on either top side of the yellow piece. Then repeat so both antennae are on both pegs.

14

Next place one eye on either outer yellow peg on the left side of the base, and repeat so both eyes are on.

15

Congratulations! You have completed the Rio Racer!

Enjoy!