Post on 04-Apr-2018
7/29/2019 Brochure Hp
1/9
7/29/2019 Brochure Hp
2/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
BRIEF INTRODUCTION
We, VISHAL PIPES LIMITED, an ISO 9001-2000 & 14001-2004 certified company, take immense pleasure
in introducing ourselves as a leading name in the Engineering & Construction Industry having IntegratedSteel Complex with modern integration to produce high quality products in Construction and Water
Management industry, i.e. manually operated Deep Well Hand Pumps for safe potable drinking water
and ERW Pipes in Round, Square, Rectangular shapes, Scaffolding Pipes, Conduit Pipes (Black and
Galvanised) & PVC Rigid & Conduit Pipes in the most modern State of the Art plant, located in
Sikandrabad (UP), just 32 km. far from New Delhi.
The organization pioneered its operations in 1989 to produce ERW Black Steel Pipes, Galvanised Steel
Pipes & PVC Pipe / Tube Scaffolding Tubes PVC Pipe Fittings, Malleable Iron Pipe Fittings and Hollow
Sections. Since then, the company has held a commanding position in the construction industry and has
not only tapped the premium segment of domestic market but has also earned name in the international
markets where the company's products are exported.
Water is the basic need of human being and all other living things for their survival on earth. As per
history, human being explored and utilized different sources of water such as ponds, lakes, rivers, streams
and surface wells. However, safe water for consumption has been a constant question throughout history.
To solve this problem, mankind has identified reliable source of deep well for drawing safe and potable
drinking water for consumption.
As per extensive research carried out, it was found that water level in Asia and Africa is continuously going
down and in most of the African countries and in some Asian countries, rural dwellers in remote areas,
wander for many hours for searching water in ponds/lakes and with no better option, they consume un-safe
water having bacteria/insects, which causes water borne disease. With God blessings, a solution in the
form of deep well hand pump was worked out for rural population which has no access to piped water
supply which is mainly available in developed cities. However, most of the hand pump suppliers havetaken this job as a profit making business. They show themselves as largest manufacturer of pumps but in
case premises of so called largest pump suppliers are inspected, they are just small garage type
assembling units. Those suppliers do not have adequate infrastructure to produce quality products. Such
suppliers procure inferior quality parts from small vendors and just assemble in their units and then dump
those products into the market with their brand name. At the same time, just to save few dollars, some
profit oriented customers prefer to buy such low cost inferior pumps. All this results into early breakdown of
pumps in the fields and then selling spares at high cost. Research has shown that millions of hand pumps
are lying in broken condition and useless in Africa due to low quality and want of expensive spares.
In view of all above problems being faced by communities, VISHAL PIPES LIMITED has taken decision to
serve the communities by manufacturing high quality hand pumps and spares in their own plant, exactly in
accordance with national and international standards as well as Unicef drawings. All piping raw material
required for manufacturing pumps and components, are already manufactured by Vishal Pipes Limited in
its own factory, and hence, need not to procure from other suppliers. Accordingly, VISHAL P IPES
LIMITED started manufacturing and supplying hand pumps under its registered brand name VPL INDIA.
We are getting enormous response from our valued customers and ultimately blessings from end users,
which has enhanced our confidence and enthusiasm to achieve top avenues in the handpump segment .
Our pumps and their components are manufactured in accordance with specified specifications and they
are compatible. Our pump and components/spares can be used with the old pumps lying in broken
condition in various parts of field for want of spares.
7/29/2019 Brochure Hp
3/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
PRODUCT RANGE
India Mark II Deep Well Had Pump
India mark II Extra Deep Well Hand Pump
India Mark III Deepwell Hand Pump (VLOM 50 & 65mm)
Force & Lift Hand Pump
Uganda II & III Deep Well Hand Pump
Afridev Hand Pump
Treadle Irrigation Pump (Pedal pump)
Various Pump Components, Cylinders, Spares, Tools, etc.
PVC Pipe, Ribbed Screen and Casing, SWR, Column Pipes, etc.
Reinforced Suction and Layflat Delivery Hoses
Steel Pipes for Water & Sanitation, Construction/Structural purpose
Miscellaneous products (builders hardware, sanitary & bathroom fittings,hospital equipment, etc.)
STANDARD PARAMETERS / SELECTION GUIDE FOR HAND PUMPS
S. No. Type of Hand Pump StrokeLength(mm)
Minimumdischarge in 40
strokes
Staticwater level
(metre)
Minimumborewell casing
size (NB)
1 India Mark II Deep Well HandPump
125(+ 4)
15 litre 20-40 100
2 India Mark II Extra Deep WellHand Pump
100(4)
12 litre 20-50 100
3 India Mark III Deep Well HandPump (VLOM 65mm))
125(+ 4)
15 litre 20-40 125
4 India Mark III Deep Well HandPump (VLOM 50mm))
175(4)
14 litre 20-50 100
5 Afridev Deep Well Hand Pump 225(6)
16 litre 10-45 100
7/29/2019 Brochure Hp
4/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
INDIA MARK II DEEP WELL HAND PUMP
India Mark II Deep Well Hand pump, manufactured asper Indian Standard : IS:15500/2004 suitable for depthupto 45 metres. It dis a specially designed pump, evena child can operate easily.
Minimum bore wellcasing size
100 mm
Stroke length 125 ( 4 mm)
Average discharge 15 to 17 litres per minute/40 strokes
Operating depth Upto 45 metres
Applicable technicalstandard IS:15500/2004
General overview of components
Above groundstructure
The above-ground mechanism whichincludes head, handle, water tank andpedestal (stand), is fabricated fromwelded steel plates and sections forstrength, and hot-dip galvanized forcorrosion resistance.
Options of pedestal : Normal 3 legged pedestal
Telescopic 3 legged pedestalCylinder assembly The normal 63.5 mm dia cylinder is
made from a cast iron casing with apolished brass liner and gun metalplunger and check valve components.Seals (pump buckets, valve seals andcap seals) are available inenvironmentally safe nitrile rubber.
The cylinder is also available instainless steel, brass and PVC.
Connecting Rods The normal mild steel (electro-
galvanized) connecting rod with couplingis in 3 metre length, 12mm dia.
However, the connecting rod is alsoavailable in stainless steel.
Riser Pipes The normal Galvanized Iron (GI) RiserPipe is in 32 mm NB (medium), 3 meterlength.
However riser pipe is also available instainless steel Riser and uPVC.
7/29/2019 Brochure Hp
5/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
U II / III MODIFIED HAND PUMP
U II Hand Pump is the same as of India Mark II Deep WellHandump with a minor difference in outlet/nozzle of the water tank.In U II Pump, the nozzle is small as compared to the nozzle of watertank of India mark II Hand Pump.
U III Modified Pump with 50mm dia open top, PVC brass linedcylinder assembly with extractable plunger and foot valvesassemblies. Recommended for water level setting depth of 20 to 45metres.
Minimum borewell casing size- 100 mmApprox. Discharge - 10 litres/minute
Riser Pipe - uPVC 63 mm ODx4.7 wt x 3 metrelength OR normal GI Riser pipes
Connecting rods - Mild Steel or stainless steel rod12mm dia x 3 metre length
FORCE & LIFT INDIA MARK II HAND PUMP
Force Lift Hand pump is very much useful for supply of water forcleaning purpose of the public toilets in urban and rural areas. Thewater available through this pump is stored in a storage tank,installed about 6-7 meters above ground-level.
This pump is very effective in the areas where electric supply is notavailable.
Since this provision provides for installation of storage tanks, wateris made available continuously throughout 24 hours. It is a costeffective solution.
Discharge - Approx. 15 litre / minute in 40 strokeStatic water level depth - 20 to 40 metreStroke Length - 125 mm (4mm)Cylinder - Cast Iron or Stainless Steel
Bore well Casing Size - 100 NB - 150 NBConnecting Rod - Mild Steel or Stainless Steel in 12 mm
dia, 3 meter length.Rising Main - Size 32 mm NB mild steel GI Riser Pipe
or 38 mm NB SS Pipe or 40mm NB uPVCPipe with coupler
7/29/2019 Brochure Hp
6/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
INDIA MARK II EXTRA DEEP WELL HANDPUMPS
India Mark II Extra Deep Well Hand pump, manufactured asper Indian Standard : IS:13287/1992 / IS 15500/2004,suitable for depth upto 90 metres. Above ground structure
made of mild steel, hot dipped galvanized, corrosionresistant, 63.5 mm dia cylinder assembly.
This pump is exclusively used for extracting water fromgreater depths. This pump is suitable for static water levelsvarying between 50 and 90 meters where placement ofcylinders can be upto 85 meters.
Most of the components are similar to the India Mark II HandPump with following differences :
Head assembly is slightly different (bracket opening is made tosuit 40 mm square handle bar).
Handle is thicker - made of 40 mm Square instead of the 32mm square. Moreover, it has tee arrangement and counterweights. The counter weights attached to the tee type handleassist in the easy movement. The number of counter weightsdepend upon the exact depth at which cylinder is placed, i.e. 1weight to be used for depth of 61 to 70 metres, 2 weights to beused for depth of 71 to 80 metres and 3 weights to be used fordepth of 81 to 90 metres
Cylinder assembly is different and is a combination of the mark2 and mark 3 components. It has 3 pump buckets.
Minimum bore size 100 mmInternal dia of Cylinder 63.5 mm
Stroke length 100 (4 mm)Average discharge 12 liters per minute of 40 strokesOperating depth (approx.) Upto to 90 metresTechnical standard IS:13287/1992 / IS:15500/2004
General overview of components
Above ground structure The above-ground mechanism which includes head, handle, watertank and pedestal (stand), is fabricated from welded steel platesand sections for strength, and hot-dip galvanized for corrosionresistance.
Options of pedestal : Telescopic 3 legged pedestal
Normal 3 legged pedestalCylinder assembly 63.5 mm dia cast iron brass sleeved cylinder with 3 pump
buckets 63.5mm dia stainless steel cylinder with 3 pump buckets
Connecting Rods Mild steel Connecting Rod, 12mm dia in 3 meter length Stainless steel Connecting Rod, 12mm dia, 3 meter long
Riser Pipes Galvanized Iron (GI) Riser Pipe, 32 mm NB, 3 meter length Stainless Steel Riser Pipe,38mm dia x 2mm WT,3 meter length PVC Riser Pipe, 40mm dia, 3 meter length
7/29/2019 Brochure Hp
7/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
INDIA MARK III DEEP WELL HANDPUMPS (VLOM 50 & 5 MM)
India Mark III Deep Well Hand pump, manufactured as per Indian Standard:IS:13056/1991, suitable for depth upto 45/50 metres. Above ground structure made of
mild steel, hot dipped galvanized, corrosion resistant, 50/65 mm dia cylinder assembly.This pump is modified version of India Mark II Hand Pump. The basic difference in IndiaMark - III Handpump and India Mark II Handpump is that this pump has Open Top Cylinder(OTC) which facilitates pulling out of plunger assembly and check valve assembly from thecylinder without pulling out the cylinder / riser main. Due to its features, this is also knownas "Village Level Operation and Maintenance" (VLOM) Handpump.
Since it is a simple cylinder assembly with single gun metalcomponent in each valve, no tools are required formaintenance of valves.
Rubber centralizers are used to maintain proper alignment ofriser pipes
Pump can draw water upto a depth of 50 metres. Modifications incorporated in this pump simplify maintenance
procedure and reduces maintenance. Maintenance can bedone at village level
Below ground level repair could be carried out within a veryshort time without removing pipes.
It minimizes breakdown time.
VLOM 50mm VLOM 65mm
Minimum bore size 100 mm 125 mm
Internal dia of Cylinder 50 mm 65 mmStroke length 175 (4 mm) 125 (4 mm)
Average discharge 14 litres/minute/40 strokes 15 litres/minute/40 strokesOperating depth (approx.) Upto to 45 metres Upto to 45 metresApplicable technical standard IS:13056/1991 IS:13056/1991General overview of components
Above ground structure(fabricated from weldedsteel plates and sectionsfor strength, and hot-dipgalvanized for corrosionresistance)
Head, handle, water tank andpedestal (stand).Options of pedestal : Normal 3 legged pedestal Telescopic 3 legged pedestal
Head, handle, water tank andpedestal (stand).Options of pedestal : Normal 3 legged pedestal Telescopic 3 legged pedestal
Cylinder assembly 50 mm dia open top cast iron/brass sleeved cylinderassembly
50 mm dia open top stainlesssteel cylinder assembly
65 mm dia open top cast iron/brass sleeved cylinderassembly
65 mm dia open top stainlesssteel cylinder assembly
Connecting Rods Mild steel Connecting Rod,12mm dia in 3 meter length
Stainless steel ConnectingRod, 12mm dia, 3 meter long
Mild steel Connecting Rod,12mm dia in 3 meter length
Stainless steel ConnectingRod, 12mm dia, 3 meter long
Riser Pipes (available inGI / SS / PVC)
GI Riser Pipe, 50 mm NB, 3meter length
SS Riser Pipe, 3 meter PVC Riser Pipe, 50 mm dia, 3
meter
GI Riser Pipe, 65 mm NB,3 meter length
SS Riser Pipe,3 meter length PVC Riser Pipe, 76 mm dia,
3 meter length
7/29/2019 Brochure Hp
8/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
AFRIDEV DEEP WELL HAND PUMP
Afridev Deep Well Hand Pump, manufactured as per SKAT-HTN Switzerlandspecifications, with 50mm dia open top, PVC brass lined cylinder assembly withextractable plunger and foot valves assemblies, suitable for depth upto 45 metre.
This pump was designed on the basis of field trials in Africa, for drawing water upto adepth upto 45 metres. . It has a cylinder that allows the piston to be extracted withoutremoving the rising main.
Major features of this pump are as under :-
Bearing bushes are made from special plastics and the pump is hot dip galvanized. Variable handle settings are possible to meet changes in water levels at different times. Customization of spout length and Pedestal is possible.
Choice of Eye & hook connecting rod or threaded connecting rod.
Easy to install, can be accomplished by village women mechanics. Alternative stainless steel lined cylinder available for aggressive water conditions.
Quick release Eye & Hook tool-less ends on Connecting Rods with rubber Centralisersfacilitate maintenance and protect the riser pipe against internal wear.
Cylinder Assembly
Minimum bore well casing size 100 mm
Stroke length 225 ( 6 mm)
Average discharge per stroke 16-17 litres
Operating depth (approx.) Upto 45 metres
Applicable technical standard SKAT-HTN, Switzerland
Minimum bore well casing size 100 mm
Stroke length 225 (+6 mm)
Average discharge 16-17 litres / minute/40strokes
Operating depth (approx.) Upto 45 metres
Applicable technical standard SKAT-HTN, Switzerland
General overview of components
Above groundstructure
Head assembly, handle assembly(front & rear), pedestal (stand).Options of pedestal : Normal 3 legged pedestal
Square flanged pedestal Rectangular flanged pedestal
Cylinder assembly 50 mm dia PVC brass lined cylinderassembl
Connecting Rods Mild steel Connecting Rod, 10mmdia in 2.9 meter length, threaded oreye & hook arrangement.
Stainless steel Connecting Rod,10mm dia, 2.9 meter long,threaded or eye & hookarrangement.
Riser Pipes PVC Riser Pipe, 63mm OD x 4.7 mmwall thickness ) in 2.9 meter length
7/29/2019 Brochure Hp
9/9
DEEP WELL HAND PUMPS
IN ACCORDANCE WITH BIS/
SKAT-HTN SPECIFICATIONS
ISO 9001-2000 & 14001/2004 certification
BIS certification
Govt. of India accredited Export House
TREADLE PUMP FOR IRRIGATION
This kind of Treadle Irrigation Pump is suitable for irrigation upto the area of about 2 acres.In this system, water is lifted from nearby pond, lake canal etc. through suction and ispumped through hoses over long distances. In addition to irrigation, it can be used to fill thewater tanks kept on roof.
The pump can draw water from 7 metre depth and push it to 7 metre high or 180 metre onground. The pump is treadle driven, 100% manual. The pump is maintenance free and canbe used at different places, i.e. easy movement. The installation is very easy and straightforward. The replaceable piston rubber cups are supplied and can easily be fitted by anyuser. The major advantages of this pump are : low cost , efficient foot powered manualoperation, easily maintained, ability to generate significant additional income for smallholders, flexibility in installation and further movement from one location to anotherlocation, etc.
Steel Treadle Irrigation Pump (Pulley & Steel Rope Arrangement)Suction lift - 7 metre maximum. Delivery Head - Upto 16 metre
Discharge - About 2000 to 2400 litre per hour. Irrigable Area -Upto 2 acres.Construction
Pump cylinders The treadle pumps has two cylinders each with acylinder bore of 121mm each; cylinder height is160mm and is made of rolled steel sheet
Pump Manifold(junction box)
The pump manifolds is constructed from a 2.5mmsteel sheet fabricated into a box form
Non-returnValves
The pumps has two pairs of non-return valves,one on the inlet side of the pump and another onthe outlet. The valve type is flapper type, made of
66mm X 2.8mm thick circular rubber.PistonAssembly
The piston assembly constitutes the piston rodmade of 25mm x 6mm and 5.5mm thick rubberseals (cups)
Treadles The treadles are made of box section steelmaterials of 800mm length, cranked shaped withthe hinge position at the end
Rocking Bar orPulley Wheel
The pump has a rocking steel bar made of 20mmx 5mm flat steel bars
Frame The frame ensures that the pump is portable andsupports all other components of the pump. It ismade of 50mm x 25mm- box section steelmaterial.
VISHAL PIPES LIMITED(Hand Pump Division)
Office : 32, Nishant Kunj, Kohat Enclave, Pitampura, New Delhi-110034. India
Works : A-71, Industrial Area, Sikandrabad (UP), India
Contact person : Mr. Vivek Agarwal Head of International Business
Mobile No. : +91-9971732727. Tel. # : +91-11-46205620 (100 lines). Fax # : +91-11-46205699
E-mail : handpump@vishalpipes.com Website : www.vishalpipes.com