2.9x1.6”

PUSHBUTTONS

BNDUNE

MAD ELEVATOR FIXTURES115 City View DriveEtobicoke, OntarioM9W 5A8, Canada

1-866-957-8500(416) 245-8500

(416) 245-8502 Faxinfo@madfixtures.com

www.madfixtures.com

MAD’s DUNE Series Pushbutton is vandal-proof, cast alloy

with illuminated halo. Can be paired with a standard or

illuminated square braille tags.

Studless MountinguuSatin Nickel or Brass colored non-tarnishing finish

LED Illumination available in Red, Amber, Blue, Green and WhiteuCast or white LED illuminated braille halou

2.9x1.6”

B N

1.6x1.6”

QNo Braille Tag

2.9x1.6”

TCast Braille TagSS Braille Tag

(not Illuminated)White LED

Illuminated SS Braille Tag

11076DUNE

BN DUNE Pushbutton

General: Vandal Proof Studless Frontal Mounting Cast Alloy Pushbutton. Fastened by jam-nut on plates from 11 to 22 Gauge thick Pressel: Cast Zama Alloy with Satin Nickel or Brass colored finishes. Pressel activation is limited by the cast alloy base preventing any stress on the contact block resulting in an extremely robust vandal-proof pushbutton

Contacts: Available with one or two microswitch (2NO/1NC)

Wiring: Screw terminals or JST Pin Connector

Voltage: 24V AC/DC

Illumination: LED-illumination of halo in Red, Amber, Blue, Green and White Stroke: 0.060”

Avg. life: 1,500,000 activations

Degree of protection: IPX3

GENERAL DETAILS

dimensions in inches

.22”

.83” .91”

1.6”1.6”

3.35”*Clearance required behind plate

Retro-illuminated version only

1.4”

2.9”

3.35*

1.25”

1.6”

2.36*

1.1” 1.6” 1.25”

WHITE illuminationWHITE illumination

Cast Braille Tag

Stainless Steel tag w/t White LED Illumination Stainless Steel Tag, non-

illuminated

Braille Tag

.XXMarking00 - none02 - ‘2’AL -

etc. ..

BNX X F 0 0 0

StyleQ - No Braille TagT - Cast Braille TagN - SS Braille Tag (not illuminted)B - White LED Illum. SS Braille Tag

FinishV - Stainless SteelY - PVD Brass

Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White

BS0 00 X X X .01

Voltage4 - 24V AC/DC0 - No Illumination

Contact3 - 1 Contact 4 - 2 Contact

(Microswitch)

(Microswitch)

0 X

WiringM - Screw TerminalsC - JST Connector

Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White

BNX X F X X X

Voltage4 - 24V AC/DC0 - No Illumination

Contact3 - 1 Contact 4 - 2 Contact

(Microswitch)

(Microswitch)

X

WiringM - Screw TerminalsC - JST Connector

.XX

StyleQ - No Braille TagT - Cast Braille TagN - SS Braille Tag (not illuminted)B - White LED Illum. SS Braille Tag

FinishV - Satin NickelY - Satin Brass

Complete Assembley Pressel & Bezel Only Contact Only

PHYSICAL CHARACTERISTICS

COMPONENT ORDERING INFORMATION

11076DUNE