InfoSight Corporation Billet Identification Solutions

Billet Barcode Tagging Solutions

FlagTag®

• CO2 Laser Marked Tags for Barcode Traceability • Fully Automatic System • Machine readable Barcodes • Fast cycle times • Easily applied to hot or ambient steel • Proven Reliable MIG Welding • Consistent, High Quality Barcodes • Ability to print logos

Billet Stamping Solutions InfoDent® ID8400

• Automatic programmable dot matrix marking system for hot or cold stamping applications • Legible Marking on rough, uneven surfaces • Permanent Dot Peen markings • Easily print two lines of 8 characters per line in

under 5 seconds • Depth of mark easily adjustable by air pressure settings • Character size and font adjustable via software • Cost per mark is less than $0.0005 USD • “Hot” emergency backup using 2nd row of

pins

Typi-cal

Stamped Mark on 950°C

Steel Bil-let

www.infosight.com/billet

Typical InfoDent® Stamped Mark on a sawcut steel bar end

2 lines of 5-19mm characters 7 x 9 Font Front View of an InfoDent® ID8400 Stamping Head 2 Rows of 4 Pins Each

Custom Built Multi-Strand InfoDent® ID8400 Stamping System

Sample of stamped, flame cut billet end with uneven surface

INFODENT® BILLET STAMPING SYSTEMS Model ID8400– Heavy Duty

www.infosight.com/billet

Automatic Billet Tagging Systems

• Fully Automatic Systems • Labor Savings • Eliminate Human Error • High Quality Barcodes • Tags Survive Application at

1800°F / 1000°C • Fast Cycle Times~ 20 seconds • Reliable Two Point MIG Welding • Proven and Reliable

FLAGTAG® BILLET TAGGING SYSTEMS Model 2951– Heavy Duty

Tagging Video Link: http://tinyurl.com/bsothf Stamping Video Link: http://tinyurl.com/al8uym

If your corporate IT dept blocks YouTube™, you may have to view off-site

Automatic Billet Taggers CO2 laser marked tags survives application at

1800°F / 1000°C Automatic Stamping Systems PERMANENT Identification

Robust systems designed and built to handle the harsh steel mill environment

We Mark Billets!

InfoDent® Flagtag® are registered trademarks Printed in USA 2/2009 Copyright 2009 InfoSight Corporation Email: sales@infosight.com www.infosight.com

Hot Billet just after stamping with the InfoDent® ID8400

InfoSight Corporation 20700 US Hwy. 23 Chillicothe, Ohio 45601 USA Ph: 1+740-642-3600 Fax: 1+740-642-5001