Post on 22-Sep-2020
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ Sales@StateSupply.com
5
Bell & Gossett EcoCirc® 19-16 Circulating Pumps High Efficient, EcoCirc® 19-16 pumps have three different, selectable modes of operation: ■ Proportional Pressure Mode (factory default):
Sensorless control mode automatically adjusts pump performance to the re-quirements of the system, based on the curve that is set with the pump’s integral adjustable dial. Mode identified by lit “blue” light on adjustment dial.
■ Constant Pressure Mode: Sensorless control mode automatically maintains constant differential pres-sure, based on the curve that is set with the pump’s integral adjustable dial. This mode is used on systems with relatively small pressure losses. This mode identified by the lit “green” light behind the speed adjustment dial.
■ Constant Speed Mode: Pump maintains a fixed speed mode at any flow demand, based on the pump curve that is set with the pump’s integral adjustable dial. This mode identified by the lit “white” light behind the speed adjustment dial.
Specifications: Motor Design: ECM - Electronically commutated shaft-less spherical motor with permanent magnet technology, Maximum system pressure: 150 psi; Maximum operating temp: 203° F; 115 volt, 60 Hertz power; Power con-sumption: 5 to 60 Watt; Water/Glycol mixtures to 20% volume.
Step-less speed dial with LED for pump status and troubleshooting
Magnetically centered spherical impeller/rotor
*High Efficiency ECM Motor
Model No.
Product Code
Body Construction
Max. RPM
Motor Pump-to-Pipe Flanges (Set of Two Flanges) Pump
Weight in lbs.
Pump Order No. Phase Watts ¾” 1” 1¼” 1½”
19-16 6050B2003 Cast Iron
Variable 115V 1 ph 60 Hz
Varies 4-60 8.25
BH1129E
6050B2004LF Stainless Steel BH1129H
BG1005 BG1010 BG1015 BG1020
BG1040 BG1045 BG1050 BG1055
EZ replacement for your Series 100 pumps
Same flange & connection as series 100 pumps, but uses less than one-half of the electricity and cost LESS than the 100 model pump.
Ordering Guide
EcoCirc® reduces energy consumption by more than 60%
Uses less than half the electricity as standard heating circulators!
*ECM motors reduce energy consumption by at least 60% when compared to standard motors.
Dimensions, inches
6.38
3.54
6.09 7.4
3.74
Cast Iron Model
Stainless Steel Model
Proportional Pressure Constant Pressure Constant Speed
Replaced the short lived 19-14 series in Jan. 2018
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ Sales@StateSupply.com
9
Bell & Gossett e3 Whole House Potable Water Pumps Ecocirc e3 Pumps run on 10 watts - About the same power consumption as a night light Powered by ECM motor design that results in significant energy savings and improved performance: A permanent magnet motor eliminates the need for input power to mag-netize the rotor, thereby saving the majority of energy used to power a pump.
Adjustable speed switch models to manually adjust to infinite motor speeds.
Adjustable temperature models are only found on fixed speed only pump.
UltraCirc models a built-in air purger, and integral check/isolation valves.
■ Max. working temp: 203 F ■ Min. working temp: 50 F ■ Max. working pressure: 150 psi ■ Power consumption: 5-28 watts ■ Power source: 100-140V, 60HZ ■ Model e3-4 pumps up to 4 GPM ■ Model e3-6 pumps up to 6 GPM
e3 Timer
Can be installed on all e3 pumps
Easily installed to the bottom of any e3 pump. Uses the pump’s power. Three modes: ON-OFF-TIMER. 30 minute mini-mum run time. Order e3 Timer separately.
Pump Model No.
Product Code
Connection Power
Consumed Adjustable
Speed Pump
Adjustable Temp Sensing
Pump
Plug-In to Power Source
Wgt lbs
Order No. Pipe
Size Type
e3-4V/BSPYZ LHB081100101
½”
Sweat
5-28 Watts
■ ■ 3 BH1016
e3-4_/BSXRZ LHB081100102 Sweat ■ 3 BH1016A
e3-4V/BSXRZ LHB081100104 FPT ■ 3 BH1016C
e3-4_/BSTRZ LHB081100106 FPT ■ ■ 3 BH1016E
e3-6V/BSPYZ LHB081100109 Sweat ■ ■ 3 BH1016H
e3-6V/BTXYZ LHB081100112 FPT ■ 3 BH1016K
e3-6V/BTPYZ LHB081100110 FPT ■ ■ 3 BH1016M
e3-4V/BUPYZ 6050B5002 Union
UltraCirc Models
■ ■ 4 BH1016N
e3-4_/BUPRZ 6050B5003 ■ ■ 4 BH1016R
e3-6V/BUPYZ 6050B5004 ■ ■ 4 BH1016T
e3-6_/BSPRZ 6050B5006 ■ ■ 4 BH1016V
e-3 Timer LHB08260002 Three mode timer: ON-OFF-Timer, 30 min. run 0.6 BH1016X Easily attaches on any e3 pump
UltraCirc Model
Click the Order No. for detailed product information.
Sweat Model
FPT Model
e3-6 Pump Curves e3-4 Pump Curves
Copyright 1987-2018 State Supply www.StateSupply.com
Toll Free: 800.772.2099 ■ Order Online: www.StateSupply.com ■ Fax: 651.774.7156 ■ Sales@StateSupply.com
11
Bell & Gossett EcoCirc XL High Efficiency Pump
Model No. Cast Iron
Product Code No.
Wgt. lbs.
Model No.
Stainless Steel
Product Code No.
Wgt. lbs.
No. Flange Bolts
Motor Characteristics Cast Iron Order No. HP *Watts
Range Voltage 1 phase
Amp Range A H J K
XL20-35 104300 19.8 XLN20-35 104450LF 22.0 2 1/12 6-85 115 0.1-1.3 9.94 3.16 2.62 .47 BH1127 XL36-45 104301 19.8 XLN36-45 104451LF 22.0 2 1/6 20-200 115 0.1-3.0 9.94 3.16 2.62 .47 BH1127A XL36-45 104302 19.8 XLN36-45 104452LF 22.0 2 1/6 20-200 208-230 0.1-1.5 9.94 3.16 2.62 .47 BH1127C XL15-75 104303 26.4 XLN15-75 104453LF 28.6 4 1/6 30-150 115 0.1-2.3 11.04 4.06 — .56 BH1127E XL15-75 104304 26.4 XLN15-75 104454LF 28.6 4 1/6 30-150 208-230 0.1-1.1 11.04 4.06 — .56 BH1127H XL55-45 104306 26.4 XLN55-45 104456LF 28.6 2 1/2 30-500 208-230 0.2-2.0 11.89 3.16 2.62 .47 BH1127K XL20-140 104308 35.2 XLN20-140 104458LF 39.6 4 1/2 35-470 208-230 0.2-2.0 13.39 4.06 — .56 BH1127M XL65-130 104309 39.6 XLN65-130 104459LF 44.0 2 1 45-825 208-230 0.5-3.5 14.84 3.44 2.86 .47 BH1127P XL40-200 104312 41.8 XLN40-200 104462LF 46.2 4 1 50-825 208-230 0.5-3.5 15.17 4.06 — .56 BH1127R XL70-145 104315 38.4 XLN70-145 104465LF 44.0 2 2 55-1400 208-230 0.6-6.0 14.84 3.44 2.86 .47 BH1127T XL40-275 104318 49.6 XLN40-275 104468LF 55.0 4 2 50-1400 208-230 0.5-6.0 16.04 5.06 — .53 BH1127V
Dimensions, inches
G
4.19
4.19
4.19
5.18
5.18
4.19
5.19
4.62
5.19
4.62
6.00
C
8.20
8.20
8.20
8.39
8.39
10.18
10.41
11.80
11.80
11.80
12.57
B
6.38
6.38
6.38
8.5
8.5
6.38
11.5
11.5
11.5
11.5
12.0
Stainless Steel Order No.
BH1128 BH1128A BH1128C BH1128E BH1128H BH1128K BH1128M BH1128P BH1128R BH1128T BH1128V
Three-Phase Models Coming in the Fall of 2018
Energy Saving ECM Motor, Intelligent Controls and Smart Communication for Commercial Applications The EcoCirc XL Features:
Operational in 3 different standard control modes:
■ Proportional pressure, constant pressure and constant speed. ■ The night mode functionality provides additional energy savings. ■ Advanced settings can be managed from a PC, tablet or Smartphone. ■ Also accessible via optional built-in wireless or RS-485 cable.
User-Friendly Interface:
■ Only four logically placed buttons make it “easy” to set and operate the different pump control modes and advanced communication settings. ■ Even in dark boiler or mechanical rooms, the bright display with large figures and symbols make it easy to view the pump’s status.
Pump Protection:
■ Built-in dry-run protection stops pump operation in the absence of water. ■ Electronics are separated from the pump to prevent condensation from interrupting the pump’s operation. Currently available only in one-phase electrical operation.
Pump Dimensions
High Flow Performance
Range
Use the Stainless Steel pumps for potable water.
Pump Model (ALL)
Iron Flange 3/4”
Bronze Flange 3/4”
Iron Flange
1”
Bronze Flange
1”
Iron Flange 1-1/4”
Bronze Flange 1-1/4”
Iron Flange 1-1/2”
Bronze Flange 1-1/2”
Iron Flange
2”
Bronze Flange
2” 20-35 BG1005 BG1040 BG1010 BG1045 BG1015 BG1050 BG1020 — — 36-45 — — 15-75 — — — — — — — — ¹ BG1072 ¹ BG1073 55-45 BG1005 BG1040 BG1010 BG1045 BG1015 BG1050 BG1020 BG1055 — — 20-140 — — — — — — — — ¹ BG1072 ¹ BG1073 65-130 — — BG1025 BG1060 BG1030 BG1065 BG1035 BG1070 — — 40-200 — — — — — — — — ¹ BG1072 ¹ BG1073 70-145 — — BG1025 BG1060 BG1030 BG1065 BG1035 BG1070 — — 40-275 — — — — — — — — ¹
*BG1072B ¹
*BG1073B
BG1055
Flange Dimensions
Companion Flanges for Pumps, Iron & Bronze Order 2 ea. for complete set. *3” NPT Flange. ¹ Sold by pair
Flange gaskets are included with each new pump. Order flanges separately.
GPM
Feet
of H
ead
4-bolt flange connection shown
*1 horsepower = 745 watts