Post on 14-May-2022
BASIC SUPPLY, LLC
2-3 WEEKS
BASIC SUPPLY, LLC
MANAGER
JOHN ATKINSON
PO BOX 63066
LAFAYETTE, LA 70596
337-769-0122 337-247-7699
charlotte@basicsupply.com
10553.40
IRWIN 91136
10.57 63.42
9.57 172.26
CM #43465
RUSTOLEUM 1685830
4.46 267.60
3.45 82.80
2.90 748.20
0.52 156.00
0.54 216.00
16.23 389.52
1.20 43.20
RUSTOLEUM 1932830
ENCORE 51677
SBD100
Sealfast A-AL-600
NC111
11.65 139.80
STANLEY 64-102
3.56 14.24
10.00 60.00
VULCAN MT6546642
VULCAN MT1-7/8
41.75 125.25
22.38 89.52
VULCAN MT6547512
5.89 117.80
VULCAN PC980-05860.00 5160.00
RIGID 92685
VULCAN MT6515506
1.85 22.20
Mintcraft MT6528954
4.46 8.92
25.56 2556.00
NN900
30.17 120.68
SAME PART
Irwin 911 Regular Length Silver And Deming Drill Bit, 9/16 In Dia X 6 In OAL, High Speed Steel
M-7 High Speed Steel For Strength, Heat Resistance, And Wear Resistance WhenDrilling In Wood, Metal Or Plastic; Can Be Used With Keyless Chuck. Three-FlattedShank Design Provides Better Chuck Grip And Reduces Slippage. All Silver AndDeming Bits Are 6" Long And Feature A 1/2" Reduced Shank That Fits All 1/2"Drills.
HSS-118 DEGREE POINTREDUCED SHANKBrand:"SILVER AND DEMING"TUBE PACKDia X OA Lgth In : 9/16x6
Series: 911Type: Regular LengthDiameter: 9/16 InFlute Type: SpiralPoint Angle: 118 DegCutting Direction: ClockwiseMaterial: High Speed SteelFinish: Black OxideApplicable Materials: Wood, Metal, PlasticFEATURESBit Is Constructed Of M-7 High Speed Steel For High Resistance To Abrasion During Tough Drilling ApplicationsThree-Flatted Shank Design Provides Better Chuck Grip And Reduces SlippageIdeal For Use In Keyless ChucksAll Silver & Deming Bits Are 6 In Long And Feature A 1/2 In Reduced Shank That Fits All 1/2 In DrillsStandard 118 Deg Point For Use In Wood, Metal, And Plastic
Industrial Choice 1600 Cold Galvanizing Compound Spray, 14 Oz Aerosol Can, 12 - 15 Sq-Ft/Can, Solvent Like, Liquid Contains A High Zinc Content In The Dry Film For Ultimate Galvanic Protection. Excellent Corrosion Protection. Adheres To Galvanized Metal. Fast-Drying. USDA Acceptable1600 SYSTEM16 Ounce
Finish: FlatFlash Point: -96 Deg FCoverage: 12 - 15 Sq-Ft/CanForm: LiquidOdor/ Scent: Solvent LikeUsage: For Galvanized Ducts, Storage Tanks, Fences, Gutters And Indoor/Outdoor Industrial ApplicationV O C Content: 610 G/LPacking Type: Aerosol CanStandards: ANSI Z88.2, DOD-P-21035A, MIL-P-26915C, OSHA 1910.134, USDA CertifiedSeries: 1600Specific Gravity: 1.319FEATURESEpoxy Ester ResinAcetone, Xylene, Toluene And Liquefied Petroleum Gas Propellant Solvents10 - 20 Min Touch, 1 - 2 Hr Handle, Within 1 Hr Or After 24 Hr Recoat
AEROSOL TECHNICAL DATA IC-01
1600 SYSTEM
MULTI-PURPOSE ENAMEL AEROSOL
Form: GDH-11 Rev.: 021615
1
.DESCRIPTION AND USES .
Industrial Choice® 1600 System Sprays are fast-dry, multi-purpose, modified alkyd enamel aerosols for everyday indoor/outdoor industrial applications. These aerosols will spray in any position. Not for use on galvanized steel.
Galvanizing aerosols are used for touch-up and repair to damaged galvanized steel. Do not topcoat with an alkyd finish.
Industrial Choice 1600 System Sprays comply with USDA FSIS regulatory sanitation performance standards for food establishment facilities.
.PRODUCTS .
SKU Description
PRIMERS
257400 Black Primer 1667830 Red Primer 1680830 Gray Primer 1681830 White Primer
ENAMELS (FLAT, SEMI-GLOSS & GLOSS FINISHES)
202211 Machine Green 202214 Machinery Gray 202216 Dusty Pink 214644 Electric Green 214645 ANSI 61 Light Gray 214646 ANSI 49 Medium Light Gray 214647 ANSI 70 Light Gray 257399 Purple 257401 Emerald Green 257402 Semi-Gloss White 273878 Waste Management Green 1610830 Crystal Clear 1614830 Dull Aluminum 1622830 Regal Blue 1624830 OSHA Safety Blue 1626830 True Blue 1633830 OSHA Safety Green 1638830 Hunter Green 1643830 School Bus Yellow 1644830 OSHA Safety Yellow 1653830 OSHA Safety Orange 1660830 OSHA Safety Red 1664830 Cherry Red 1666830 Banner Red 1670830 OSHA Safety Purple 1671830 Beige 1672830 Almond 1674830 Leather Brown 1676830 Ultra-Flat Black 1678830 Semi-Flat Black 1679830 Gloss Black 1684830 Dove Gray 1686830 Universal Gray 1688830 Smoke Gray 1690830 Flat White 1692830 Gloss White 1696830 Antique White
.PRODUCTS (cont.) .
SKU Description
FLUORESCENTS
1632830 Fluorescent Green 1642830 Fluorescent Yellow 1654830 Fluorescent Orange 1655830 Fluorescent Red-Orange 1659830 Fluorescent Pink
GALVANIZING
1685830 Cold Galvanizing Compound 244305 Bright Galvanizing Compound
.PACKAGING .
6 aerosols (16 fl. oz. container, 12 oz. weight fill) per carton. Galvanizing aerosols: 6 aerosols (16 fl. oz. container, 14 oz. weight fill) per carton. 242657: 6 aerosols (16 fl. oz. container, 11 oz. weight fill) per carton.
.PRODUCT APPLICATION .
SURFACE PREPARATION
ALL SURFACES: Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with Pure Strength® Cleaner/ Degreaser item #3599402, commercial detergent or other suitable cleaner. Rinse immediately and thoroughly and allow to fully dry. Thoroughly cured, hard or gloss previous coatings which are very smooth may require scuff sanding to maximize adhesion. This coating may not be compatible with some types of plastics. It is strongly suggested a small test patch be done before applying to any plastic. Also, some plastics, like polycarbonate, are never to be painted. Consult with the manufacture.
STEEL: Hand tool (SSPC-SP-2) or power tool (SSPC-SP-3) clean to remove loose rust, mill scale, and deteriorated previous coatings. For best results, use Red Primer on sound rusted or clean metal before the application of a finish coat or intermediate primer.
GALVANIZED STEEL: New galvanized steel may contain a surface wax or oil from the fabricator. This must be removed with Pure Strength® Cleaner/Degreaser (#3599402), commercial detergent or other suitable cleaner. NOTE: Only the Galvanizing Compounds are to be used on galvanized steel. Do not use any other of the 1600 System Primers or Finish Colors.
WEATHERED GALVANIZED STEEL: Remove loose rust and stains by hand tool (SSPC-SP-2) or power tool (SSPC-SP-3) prior to application of the Cold Galvanizing Compound.
APPLICATION
Use when temperature is above 50°F (10°C) and humidity is below 85% to ensure proper drying. Surface temperature must be between 50-100°F (10-38°C). Use a primer on bare or rusted surfaces. Protect surrounding surfaces from overspray. Overspray can carry a significant distance. Shake can for one minute after mixing ball is heard. Hold can 10-14" from surface. Apply several light coats a few minutes apart to avoid drips and runs. This aerosol will spray in any position or angle, including upside down.
TECHNICAL DATA
1600 SYSTEM MULTI-PURPOSE ENAMEL AEROSOL
Rust-Oleum Corporation Form: GDH-11 11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 021615 Vernon Hills, Illinois 60061 www.rustoleum.com/industrial An RPM Company
.PRODUCT APPLICATION (cont.) .
CLEAN-UP
Wipe off tip before storing. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in trash compactor. Empty container can be recycled.
.PRODUCT APPLICATION (cont.) .
CLOGGING
If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.
. PHYSICAL PROPERTIES .
FLAT ENAMELS & PRIMERS
GLOSS FINISHES GALVANIZING*
Resin Type Modified Alkyd Modified Alkyd Epoxy Ester
Pigment Type
Varies with color
Varies with color
1685830 contains 93% zinc in the dry film
244305 contains greater than 65% zinc in the dry film (also contains aluminum)
Solvents Acetone, xylene, toluene (fluorescents contain hexane) and liquefied petroleum gas propellant
MIR Maximum value of 1.2 Finishes: Max. value of 1.4 Metallics: Max. value of 1.9
Maximum value of 1.2
Fill Weight 12 oz. Finishes: 12 oz. Metallics: 11 oz.
14 oz.
Recommended Dry Film Thickness Per Coat
1-2 mils (25-50µ)
1-2 mils (25-50µ)
1-2 mils (25-50µ)
Practical Coverage at Recommended DFT
† 12-15 sq.ft./can (1.1-1.4 m2/can)
12-15 sq.ft./can (1.1-1.4 m2/can)
12-15 sq.ft./can (1.1-1.4 m2/can)
Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity
Touch 10 minutes 10 minutes 10-20 minutes
Handle 1 hour 1 hour 1-2 hours
Recoat Within 1 hour or after 24 hours
Within 1 hour or after 24 hours
Within 1 hour or after 24 hours
Dry Heat Resistance 200°F (93°C)** 200°F (93°C)** 200°F (93°C)**
Shelf Life 5 years 5 years 5 years
Safety Information For additional information, see MSDS
Calculated values are shown and may vary slightly from the actual manufactured material. *Do not topcoat galvanizing compounds with an alkyd finish. **Some discoloration may occur at temperatures above 150°F (65°C). †Actual coverage with complete hiding. Coverage may vary with color and substrate. The coverage rate can be optimized if applied over the white or gray primer.
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.
Rustoleum Specialty Oil Based Spray Paint, 11 Oz Aerosol Can, Fluorescent GreenUsed For Bringing Bright Vibrant Color To Sporting Goods, Crafts, Toys, Kids' Decorations And More. Also Great For Stenciling, Marking, Color-Coding And Wherever High Visibility Is Desired. Good For Halloween Or Hunting Season.Finish: Flat/MatteApplicable Materials: Bare Wood And MetalCapacity: 11 OzCoverage: 10 - 12 Sq-Ft/CanFlash Point: -156 Deg FForm: Aerosolized Mist, LiquidOdor/ Scent: Solvent LikePacking Type: Aerosol CanPigment: Varies With ColorSeries: SpecialtySpecific Gravity: 0.854Standards: OSHA 1910.134, ANSI Z88.2Temperature Rating: 50 - 90 Deg FThinners: Acetone, Hexane, Toluene, XyleneType: Oil BasedUsage: For Indoor And OutdoorVehicles: Modified Acrylic LacquerV O C Content: 575 G/LFEATURESOil-Based Formula Creates High Visibility When Sprayed Onto ObjectsGreat For Use During Halloween And Hunting SeasonUndercoat With Flat White Paint To Maximize Neon EffectFast Drying
Sweatband, Blue, Solid Pattern, Size Universal, Material Sponge, Package Quantity 100
Encore 51677 Paint Pail, 5 Gal, 0.9 Mil T, HDPE, WhiteUsed For Paints, Coatings, Varnishes, Water Sealants, Concrete Patching Compounds, Asphalt Coatings, Printing Inks, Soaps And Detergents. Designed With Reinforced Saturn Rings Around The Top To Prevent Rim Distortion When Carried. Uniform Wall Thickness For Stacking Strength. Made With (HDPE) High Density Polyethylene. Food Grade. Uniform Wall Thickness For Stacking Strength. Tapered Design For Easy Separation, Maximum Storage And Shipping Cube. High Visibility Offset Graphics Available, Maximum Of Four Color Sidewall PrintSE (Space Efficient) Pails 100% Encore OriginalHeat Transfer Labels Available For 3.5, 4.25 And 5 Gal Pails
HDPE - INDUSTRIALPAIL ONLYCap Gal : 5Size Mil : .90
Item # A 600AL, Seal Fast Cam and Groove - Female NPT x Male Adapter On Seal Fast, Inc.
Specifications
Size 6 inMaterial 356 T6 AluminumWorking Pressure 75PSI
larger i mage
Item # A 600AL, Seal Fast Cam and Groove - Female NPT x Male Adapter
Working Pressue recommendation is based on use of mating fittings at ambient temperatureof 70° F with standard Buna-N Seal
Seal Fast, Inc.5603 Harvey W ilson Dr.Houston Texas 77020 Website: www.sealfast.com
Mintcraft MT6546642 Combination Wrench, 1-1/16 In, 12 pt., Chrome Vanadium SteelPRODUCT OVERVIEW: Drop-Forged Chrome Vanadium Steel. Torque And Hardness Meet Or Exceed ANSI Standards.
PROFESSIONAL QUALITYFRACTIONALHang TaggedSize In : 1-1/16
PRODUCT DETAILSWrench Opening: 1.0625 InMaterial: Chrome Vanadium SteelStandards: ANSI SpecifiedFEATURESHang TaggedProfessional Quality
Mintcraft MT1-7/8 Combination Wrench, 1-7/8 In, 12 pt, Chrome Vanadium SteelPRODUCT OVERVIEW: Made Of Drop-Forged Chrome Vanadium Steel. Hang Tagged.FRACTIONALSize In : 1-7/8
PRODUCT DETAILSWrench Opening: 1.875 InMaterial: Chrome Vanadium SteelStandards: ANSI SpecifiedFEATURESHang Tagged
MT6547512 Combination Wrench, 1-7/16 In, 12 pt, Chrome Vanadium Steel PRODUCT OVERVIEW: Made Of Drop-Forged Chrome Vanadium Steel. Hang Tagged.FRACTIONALSize In : 1-7/16
PRODUCT DETAILS Wrench Opening: 1.4375 InMaterial: Chrome Vanadium SteelStandards: ANSI SpecifiedFEATURESHang Tagged
Mintcraft PC980-05 Groove Joint Plier, 10 In OAL Precision Milled Jaw, Drop Forged High Carbon SteelPRODUCT OVERVIEW: Drop Forged Hardened High Carbon Steel; Chrome Plated Finish Resists Rust And Corrosion; Tempered And Heat Treated For Hardness; Precision Milled Jaws For Slip-Resistant Grip; Non-Slip Vinyl Comfort Grips; Hardness Meets Or Exceeds ANSI Standards.
PRODUCT DETAILSJaw Type: Precision MilledFinish: Chrome PlatedHandle Material: VinylHandle Type: Non-Slip Comfort GripJaw Material: Drop Forged High Carbon SteelOverall Length: 10 InStandards: ANSI SpecifiedFEATURESFinish Resists Rust And CorrosionTempered And Heat-Treated For Hardness
Mintcraft MT6515506 Standard Socket, 1/2 In, 1/2 In, 12 PointPRODUCT OVERVIEW: Drop Forged Chrome Vanadium Steel.
1/2" DRIVE - 12 POINTPROFESSIONAL QUALITYFRACTIONALSize : 1/2 In.
PRODUCT DETAILSDrive Size: 0.5 InNumber Of Points: 12Socket Size: 0.5 InMaterial: Chrome Vanadium SteelFEATURESHang TaggedProfessional Quality
9/13/2017 Chain Tongs | RIDGID Professional Tools
Chain Tongs
CATALOGNUMBER
MODELNO. DESCRIPTION
TOTALLENGTH
PIPECAPACITY
CHAINLENGTH
CHAIN BREAKINGLOAD WEIGHT
IN. MM IN. MM IN. MM LB. KG LB. KG
92685 3237 Double-End
Reversible
Chain
Tongs, 2" -
12" Pipe
Capacity
64 1,625 2 -
12
50 -
300
55
1/2
1,410 31,000 14,061 67 30
Mintcraft MT6528954 Deep Socket, 1/2 In, 1-1/16 In, 12 PointPRODUCT OVERVIEW: Drop-Forged Chrome Vanadium Steel.1/2" DRIVE - 12 POINTPROFESSIONAL QUALITYFRACTIONALHang TaggedSize : 1-1/16 In.PRODUCT DETAILSDrive Size: 0.5 InNumber Of Points: 12Socket Size: 1.0625 InMaterial: Chrome Vanadium SteelFEATURESHang TaggedProfessional Quality