Silent Marine Mounts

www.avindustrialproducts.co.uk

Uses

Marine engine mounts are specially designed to isolate vibration and structural noise transmission

from marine engines.

Our range of Marine Mountings prevents vibration from travelling

through the boats structure

Why replacing them is important…

It is important to help maintain a well-functioning, healthy rubber vibration mount because poor or worn out rubber mountings can cause problems.

One problem is that the bearings and gearboxes can become worn out, struts loosen or

transmission failure can occur.

Our MountsThe Silent Marine mountings are manufactured from High Performance Rubber and Mild Steel

plates.

Clear Zinc Plating to prevent rusting and an internal bump/rebound control stop.

Also available in Stainless Steel for corrosion resistance

Things you need to considerAs a guide to selecting the best type of marine engine mount -you need to consider:1. The make/model of engine.2. The number of engine mountings and gearbox

mounts required.3. The number of cylinders it contains.4. The mass of the engine and gearbox.5. The existing mountings (if applicable).6. The weight distribution and thrust applied to the mounting.

AV Industrial Products Ltd

If you would like to place an order or if you require technical assistance for your application, feel free to give us a call on +44(0)116-2461261 or

email us at mail@avindustrialproducts.co.uk

www.avindustrialproducts.co.uk