Post on 23-May-2020
Artefact Series II Door Furniture
ASSA ABLOY, the global leader in door opening solutions
AAA-
CAT-
039
MS0
575
Contents
Lockwood Door Furniture Handing Convention 2
Square Corner Plates 3
10mm Radius Corner Plates 5
Round End Plates 6
Square End Plates 7
Round Rose Furniture 8
Square Rose Furniture 9
218/219 10mm Radius Corner Push/Pull Plates 10
216/217 10mm Radius Corner Push/Pull Plates 11
214/215 10mm Radius Corner Push/Pull Plates 12
206/207 Series Push & Pull Plates 13
208/209 Series Push & Pull Plates 14
Pull Handles 15
Stainless Steel Pull Handles with Rose 16
Finishes 17
Limiting Dimensions for Lever/Knob Selections 18
Legend 19
Ordering Procedure 20
Lockwood Catalogue
1
Artefact Series II Door Furniture
The distinguished range of Artefact in Aluminium, Brass and Stainless Steel, offers architects and specifiers a complete range of slim line, door furniture plates.
Suitable for use in public, commercial, industrial and institutional buildings, where there is a need for high grade and durable fittings.
Artefact range of door furniture plates offers a selection of functions with engraving available to suit most requirements.
Lever
Plates
200 Series
Engraving
Pull Handle & Plates
2
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
Lockwood Door Furniture Handing ConventionApplicable for all Artefact Series II Plates.
ExternalLever Assembly
InternalLever Assembly
InternalLever Assembly
ExternalLever Assembly
INSIDE
OUTSIDE
Right Hand Door Left Hand Door
InternalLever Assembly
ExternalLever Assembly
ExternalLever Assembly
InternalLever Assembly
INSIDE
OUTSIDE
Right Hand Door Left Hand Door
InternalLever Assembly20305NN/96L
ExternalLever Assembly20201NA/96R
ExternalLever Assembly
20201NA/96L
InternalLever Assembly20305NN/96R
INSIDE
OUTSIDE
Right Hand Door Left Hand Door
Example
Lockwood Catalogue
3
Artefact Series II Door Furniture
Square Corner PlatesThe 200 Series Door Furniture is 162mm square with square corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors.
Features & SpecificationsDimensions162 x 162 x 3mm – Aluminium 162 x 162 x 2mm – Stainless Steel and Brass
MaterialsAluminium, Brass and Stainless Steel
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
NOTE: When using flush pulls back to back the minimum door thickness is 40mm.
FinishesStandardNatural Anodised Aluminium NT Satin Stainless Steel SS
Non-Standard Refer to page 17
Ordering ProcedureThe 200 Series is ordered to suit right or left handed doors. It is necessary to specify the furniture plate and finish code, eg 20001NA/96LNT.
162 2 3
162
48.7
28.6SS/Brass Aluminium
Plates
Levers and Knob to Suit
Pull Handle to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
20001NA
20022NN
20101NA 20120NANN41002NN30002 20004NN
NN70102NE70002 20007NN20007FN
20104NN
20139NN20005NN
20025NA/75* 20125NA/75* 20027NN/75* 20127NN/75* 20028NN/75* 20142NN/75*20024NN/75* 20124NN/75*
20122NN20105NN
20020NA
20000NA 20100NA 20006NN 20106NN 20013NN 20138NNAN01002NN20002
20024AN/75* 20024CN/75* 20024EN/75* 20024GN/75* 20031NN 20131NN 20032NA 20132NA 20035NN
20007AN 20007CN
20134NN
*5857 1611 12Stainless SteelAluminium
20 89698*8 *Aluminium Only
Brass levers and knobs also available refer page 18.
4
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
Lockwood Catalogue
5
Artefact Series II Door Furniture
10mm Radius Corner PlatesThe 202 Series Door Furniture is 162mm square with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Locks; Latches and Push and Pull doors.
Features & SpecificationsDimensions162 x 162 x 3mm – Aluminium 162 x 162 x 2mm – Stainless Steel and Brass
MaterialsAluminium, Stainless Steel and Brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
NOTE: When using flush pulls back to back the minimum door thickness is 40mm.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non-Standard Refer to page 17
Ordering ProcedureThe 202 Series is ordered to suit right or left handed doors. It is necessary to specify the furniture plate and finish code, eg 20201NA/96LNT.
162 2 3
162
48.7
28.6 SS/Brass Aluminium
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
20201NA 20220NA20301NA 20320NANN41202NN30202 20204NN
20207NN 20307NN20207FN20207AN 20207CN 20207EN
20304NN
20339NN20205NN
20225NA/16* 20325NA/16* 20227NN/16* 20327NN/16* 20228NN/16* 20342NN/16*20224NN/16* 20324NN/16*
20322NN20305NN 20222NN
20210NA NN83302NN31202NN60302AN00302AN00202 20202NN 20206NN
AN23302NN13202*/NG42202*/NE42202*/NC42202*/NA42202 20232NA NN43202NN53202NN1330216 16 16 16
Levers and Knob to Suit
Pull Handle to Suit
*5857 1611 12Stainless SteelAluminium
20 89698*8 *Aluminium Only
Brass levers and knobs also available refer page 18.
6
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
Round End PlatesThe 212 Series Door Furniture is 162mm long x 50mm wide with radius ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches.
Features & SpecificationsDimensions162 x 50 x 3mm – Aluminium 162 x 50 x 2mm – Stainless Steel and Brass
MaterialsAluminium, stainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non-Standard Refer to page 17
Ordering ProcedureThe 212 Series is a non-handed plate, however consideration to handing must be given to lever selection. It is necessary to specify the furniture plate and finish code, eg 21201NA/96SS.
50
162
2 3
SS/Brass Aluminium
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
21200NA 21300NA 21206NN 21306NN 21207NN 21307NN 21213NN 21338NN21210NA21202NN
NN40312NN40212NN30212AN10312AN10212 21205NN 21305NN
21220NA 21320NA 21222NN 21322NN
21214NN 21339NN
Levers and Knob to Suit
Pull Handle to Suit
*5857 1611 12Stainless SteelAluminium
20 89698*8 *Aluminium Only
Brass levers and knobs also available refer page 18.
Lockwood Catalogue
7
Artefact Series II Door Furniture
Square End PlatesThe 224 Series Door Furniture is 162mm long x 50mm wide with square ends. Concealed fixed plates have studs with internal threads located top and bottom, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches.
Features & SpecificationsDimensions162 x 162 x 2mm – Stainless Steel
MaterialsStainless Steel only.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardStainless Steel SS
Non-Standard Refer to page 17
Ordering ProcedureThe 224 Series is a non-handed plate, however consideration to handing must be given to Lever Selection. It is necessary to specify the furniture plate and finish code, eg 22401NA/96SS.
50
162
2 3
Stainless Steel
Plates
Levers and Knob to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
22400NA 22500NA 22406NN 22506NN 22407NN 22507NN 22413NN 22538NN22410NA22402NN
NN402NN402NN302AN1025 252AN1024 24 242 22405NN 22505NN
22420NA 22520NA 22422NN 22522NN
22414NN 22539NN
20 8969
Brass levers and knobs also available refer page 1.
Pull Handle to Suit
*5857 1611 12Stainless SteelAluminium
8
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
2 355
SS/Brass Aluminium
Round Rose FurnitureThe 260 Series Door Furniture has a 55mm Round Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 tubular latches.
Features & SpecificationsDimensions55 x 3mm – Aluminium 55 x 2mm – Stainless Steel and Brass
Materials
Aluminium, stainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardNatural Anodised Aluminium NT Stainless Steel SS
Non-Standard Refer to page 17.
Ordering ProcedureThe 260 Series may be ordered as a set to suit right or left hand doors. It is necessary to specify the furniture rose and finish code, eg 260/261/96SS.
Rose Furniture 55mm Diameter
Levers and Knob to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
280 281 286282 287
260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank
Escutcheon Furniture 50mm Diameter
20 89698*8*Aluminium Only
Brass levers and knobs also available refer page 18.
Lockwood Catalogue
9
Artefact Series II Door Furniture
Square Rose FurnitureThe 260SQ Series Door Furniture has a 55mm x 2mm Square Rose. Concealed fixed plates have studs with internal threads located on the rose, visible roses have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with Lockwood 3570 Series Mortice Latches and with A5250 tubular latches.
Features & SpecificationsDimensions55 x 55 x 2mm – Stainless Steel
MaterialsStainless Steel only.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardStainless Steel SS
Non-Standard Refer to page 17.
Ordering ProcedureThe 260SQ Series may be ordered as a set to suit right or left hand doors. It is necessary to specify the furniture rose and finish code, eg 260/261/SQ90SS.
Square Furniture 55 x 55mm
Levers and Knob to Suit
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
Legend
FIRE RATED
S3 HIGH SECURITY
DURABILITY
ANTI-CORROSION
280 281 286282 287
260 Operable 262 Blank261 Operable 264 Fixed 265 Fixed263 Blank
Square Escutcheon Furniture 50 x 50mm
20 89698*8
Brass levers and knobs also available refer page 18.
2 355
Stainless Steel
10
Artefact Series II Door Furniture
218/219 10mm Radius Corner Push/Pull PlatesThe 218 Series Door Furniture is 250 x 50 x 2mm thick stainless steel or brass with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible fixed plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors.
Features & SpecificationsDimensions250 x 50 x 2mm.
MaterialsStainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
EngravingOptions are available as indicated on the right.
FinishesStandardSatin Stainless Steel SS Non-Standard Refer to page 17
Ordering ProcedureThe 218 Series is non-handed (except where the disabled turnsnib in used). It is necessary to specify the furniture plate and finish code, eg 21825EA/16SS.
Function/Handle SelectionCertain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function.
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
21800NA 21900NA 21802NN NN83912NN31812NN70912NN70812NN60912NN60812
21825NA/* 21925NA/* 21827NN/* 21927NN/* 21824NN/* 21924NN/* 21826NN/* 21828NN/* 21942NN/*
21807AN 21824BN/* */NG42812NF7081221807EN21807BN 21807CN 21824DN/*21807DN
D Handle Selections
Stainless Steel 19mm 16 17 18
Brass 16mm 05 07 08
Centres 108mm 152mm 203mm
Handle Numbers 07 and 08 are also available in Stainless Steel.
Function Description No Engraving
With Engraving
24 Pull Handle Only 203mm 152mm
25 Pull Handle & Cylinder 152mm 108mm
26 Pull Handle & Emergency Turn 152mm 108mm
27 Pull Handle & Turn Knob 152mm 108mm
28 Pull Handle & Privacy Indicator Emergency Turn
152mm 108mm
29 Pull Handle & Privacy Indicator Turn Knob
152mm 108mm
30 Pull Handle & Dual Cylinder × ×
42 Pull Handle & Disabled Turn 108mm ×
43 Pull Handle & Privacy Indicator Disabled Turn
108mm ×
44 Pull handle only – Offset from bottom
108mm, 152mm
108mm, 152mm
NOTE: x indicates this function is not available in this configuration.
Lockwood Catalogue
11
Artefact Series II Door Furniture
216/217 10mm Radius Corners Push/Pull PlatesThe 216 Series Door Furniture is 300 x 65 x 2mm thick stainless steel or brass plate with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with 3570 Series Mortice Locks and on Push and Pull doors.
Features & SpecificationsDimensions300 x 65 x 2mm.
MaterialsStainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardSatin Stainless Steel SS Non-Standard Refer to page 17
Ordering ProcedureThe 216 Series is non-handed (except where the disabled turnsnib in used). It is necessary to specify the furniture plate and finish code, eg 21625EA/16SS.
Function/Handle SelectionCertain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function.
.
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
21600NA
21625NA/*
21607AN
21700NA
21725NA/*
21607BN
21606NN
21627NN/*
21607CN
21706NN
21727NN/*
21607DN
21607NN
21624NN/*
21607EN
21707NN
21724NN/*
21607FN
21602NN
21626NN/*
21624BN/*
21613NN
21628NN/*
21624DN/*
21738NN
21742NN/*
21624GN/*
Handle Numbers 07, 08 and 10 are also available in Stainless Steel.
D Handle Selections
Stainless Steel 19mm** 16 17 18 19
Brass 16mm 05 07 08 10
Centres 108mm 152mm 203mm 250mm
Function Description No Engraving
With Engraving
24 Pull Handle Only 250mm 203mm
25 Pull Handle & Cylinder 203mm 152mm
26 Pull Handle & Emergency Turn 203mm 152mm
27 Pull Handle & Turn Knob 203mm 152mm
28 Pull Handle & Privacy Indicator Emergency Turn
203mm 152mm
29 Pull Handle & Privacy Indicator Turn Knob
203mm 152mm
30 Pull Handle & Dual Cylinder × ×
42 Pull Handle & Disabled Turn 152mm 108mm
43 Pull Handle & Privacy Indicator Disabled Turn
152mm 108mm
44 Pull handle only – Offset from bottom
108mm, 152mm, 203mm
108mm, 152mm, 203mm
NOTE: x indicates this function is not available in this configuration.
12
Artefact Series II Door Furniture
214/215 10mm Radius Corner Push/Pull PlatesThe 214 Series Door Furniture is 300 x 100 x 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with 3570 Series Mortice Locks.
Features & SpecificationsDimensions300 x 100 x 2mm.
MaterialsStainless steel or brass.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardSatin Stainless Steel SS
Non-Standard Refer to page 17
Ordering ProcedureThe 214 Series is non-handed (except where the disabled turnsnib in used). It is necessary to specify the furniture plate and finish code, eg 21425EA/16SS.
Function/Handle SelectionCertain functions require certain handles to be used. The following table outlines which length handles (screw centre distance shown) should be used for a given function.
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
21400NA 21500NA 21406NN 21506NN 21407NN 21507NN
21425NA/* 21525NN/* 21427NN/* 21527NN/* 21424NN/* 21524NN/*
21407AN 21407CN 21407EN 21407FN21407BN 21424BN/* 21424DN/*21407DN 21424GN/*
21402NN 21413NN 21538NN
21426NN/* 21428NN/* 21542NN/*
D Handle Selections
Stainless Steel 19mm** 16 17 18 19
Brass 16mm 05 07 08 10
Centres 108mm 152mm 203mm 250mm
Function Description No Engraving
With Engraving
24 Pull Handle Only 250mm 203mm
25 Pull Handle & Cylinder 203mm 152mm
26 Pull Handle & Emergency Turn 203mm 152mm
27 Pull Handle & Turn Knob 203mm 152mm
28 Pull Handle & Privacy Indicator Emergency Turn
203mm 152mm
29 Pull Handle & Privacy Indicator Turn Knob
203mm 152mm
30 Pull Handle & Dual Cylinder × ×
42 Pull Handle & Disabled Turn 152mm 108mm
43 Pull Handle & Privacy Indicator Disabled Turn
152mm 108mm
44 Pull handle only – Offset from bottom
108mm, 152mm, 203mm
108mm, 152mm, 203mm
NOTE: x indicates this function is not available in this configuration.
Handle Numbers 07, 08 and 10 are also available in Stainless Steel.
Lockwood Catalogue
13
Artefact Series II Door Furniture
206/207 Series Push & Pull PlatesThe 206/207 Series Door Furniture are 2mm thick stainless steel plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with 3570 Series Mortice Locks.
Features & SpecificationsDimensions250 x 200 x 2mm.
MaterialsStainless steel.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardSatin Stainless Steel SS
Non-Standard Powdercoat PC
Ordering ProcedureThe 206/207 Series is ordered to suit right and left handed doors. It is necessary to specify the furniture plate and finish code, eg 20625NA/18RSS.
Plates
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
20607NN 20707NN20600NA 20700NA 20624NN/18
20724NN/18 20625NA/18 20725NA/18
20610NA
20824NN/1920807NN 20907NN 91/AN5290291/NN42902AN00902AN00802 20810NA 20825NA/19
D Handle Selections
Stainless Steel 19mm 18
Brass or Stainless Steel 16mm 08
Centres 203mm
14
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
208/209 Series Push & Pull PlatesThe 208/209 Series Door Furniture are 2mm thick stainless steel or brass plates with 10mm radius corners. Concealed fixed plates have studs with internal threads located in each corner, visible plates have corresponding countersunk holes and are fixed back to back through the door.
ApplicationDesigned for use with 3570 Series Mortice Locks.
Features & SpecificationsDimensions324 x 162 x 2mm.
MaterialsStainless steel.
Door Thickness35 to 45mm standard. For doors 45 to 55mm thick, specify long fixing screws SP2000-208.
FinishesStandardSatin Stainless Steel SS
Non-Standard Powdercoat PC
Ordering ProcedureThe 208/209 Series is ordered to suit right and left handed doors. It is necessary to specify the furniture plate and finish code, eg 20825NA/19RSS.
Cylinder Hole
Turn-Snib
Slotted Button
Disabled
LED
Indicating Slotted Button
Legend
20607NN 20707NN20600NA 20700NA 20624NN/18
20724NN/18 20625NA/18 20725NA/18
20610NA
20824NN/1920807NN 20907NN 91/AN5290291/NN42902AN00902AN00802 20810NA 20825NA/19
Plates
D Handle Selections
Stainless Steel 19mm 19
Brass or Stainless Steel 16mm 10
Centres 250mm
Lockwood Catalogue
15
Artefact Series II Door Furniture
Pull HandlesAll pull handles are designed for single handle application and can be used with Lockwood pull plates and roses.
Features & SpecificationsFixingHandles are concealed fixed. If ordered with Lockwood pull plates or roses, handles are screw fixed to plates.
MaterialsBrass and Stainless Steel where shown.
Handle No. Length Diameter Projection Fixing Centres Finger Clearance01 117 22 35 108 25
02 162 22 35 152 25
03 212 22 35 203 25
Limiting Dimensions
Limiting Dimensions
Handle No. Length Diameter Projection Fixing Centres Finger Clearance38 248 16 Base: 54 152 38
Top: 73
Limiting Dimensions
Designed for single handle applications for hospitals, disabled and aged care facilities. Material Solid brass.
Handle No. Length Diameter Projection Fixing Centres Finger Clearance
Brass Stainless Steel
04 120 13 45 108 32 ✓ ✕
05 124 16 48 108 32 ✓ ✕
06 165 13 45 152 32 ✓ ✕
07 168 16 48 152 32 ✓ ✓
08 219 16 48 203 32 ✓ ✓
09 222 19 54 203 35 ✓ ✓
10 269 19 54 250 35 ✓ ✓
16 127 19 54 108 35 ✕ ✓
17 171 19 54 152 35 ✕ ✓
18 222 19 54 203 35 ✕ ✓
19 269 19 54 250 35 ✕ ✓
16
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
Stainless Steel Pull Handles with RoseDesigned for single or double handle applications.
Features & SpecificationsDoor Thickness Double Handle Application. Fixing screws suit door thickness up to 45mm.
FinishesStandardSatin Stainless Steel SS
Non-Standard Refer to page 17
Handle No. Length Diameter Height Centre Finger Clearance17 171 19 64 152 46
18 222 19 64 203 46
19 269 19 64 250 46
Limiting Dimensions for Roses 1360, 1370, 1220 Series
Limiting Dimensions for Roses 260 Series
Handle No. Length Diameter Height Centre Finger Clearance
17 171 19 64 152 35
18 222 19 64 203 35
19 269 19 64 250 35
SS, Brass
Lockwood Catalogue
17
Artefact Series II Door Furniture
FinishesStandard FinishesSatin Stainless Steel SS Natural Anodised Aluminium NT
Non-Standard FinishesPolished Brass PB Polished Stainless Steel PS Powdercoat PC
Limiting Dimensions for Lever/Knob Selections
20 88 96 98
96 98
20 88 96 98
96 98
Aluminium
Stainless Steel
50279 Dulux Wedgewood Satin
33344 Dulux Horizon Blue Gloss
36603 Dulux Azure Grey Satin
32786 Dulux APO Grey Satin
36858 Dulux Oyster Matt
81880 Dulux Special White Gloss
33704 Dulux Tropics Gloss
32538 Dulux Stone Beige Matt
33149 Dulux Red Earth Gloss
51032 Dulux Old Mauve Satin
33662 Dulux Pottery Satin
32774* Dulux Claret Satin
81794* Dulux Deep Cherry Red Gloss
50068* Dulux Deep Brunswick Green Gloss
32694* Dulux Black Gloss
19319* Dulux Black Matt
32999* Dulux Charcoal Gloss
19930* Dulux Anodic Bronze Satin
52052* Dulux Black Onyx Gloss
18796* Dulux Charcoal Metallic Gloss
51275 Dulux Anotec Dark Grey Matt
The colours represented on this chart are as close to the actual colours as modern printing processes allow. * Technical advice should be sought, where severe ultraviolet exposure conditions exist.Note: Consideration should be given to match Cylinder Finish.
Dulux Powdercoat Range
18
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
38
17
15.9
112
120
38
17
15.9
112
120
6.839.5
25
103
115
6.5
45
22
110
121
00 Lever
Intermezzo 41
Veloce 53
Lever 70Lever 62
Tenor 79
Lever 91
20 Knob
Arpeggio 44
Lever 55
Tempo 71
Lever 79B
Lever 94
32 Lever
Sonata 45
Overture 59
Ving 74
Lever 80
Chorus Line 97
40 Knob
Nocturne 48
Soprano 61
Cadenza 78
Lever 90
17.5
45
113
123
60.5
50
17.5
40.5
95.3
107.5
42
48
124
50
22.2
103
28.5
112.5
123
6127
40
109.5
120
21
49
40
120
130
104
17.5
47
125
17
44.5
117.5
107
114
44
2852.517.2
125
36
15.9
113
121
50
17
110
118
33.5
109120
DAINTREE - dimensionals BRASS - dimensionals
DAINTREE - price book style BRASS - price book style
1038
124
116
26
114.3
123
349
6.839.5
25
106
118.5
DAINTREE - dimensionals BRASS - dimensionals
DAINTREE - price book style BRASS - price book style
1038
124
116
26
DAINTREE - dimensionals BRASS - dimensionals
DAINTREE - price book style BRASS - price book style
1038
118
109
26
Limiting Dimensions for Lever/Knob Selections
55
25
13
115
127.5
Lockwood Catalogue
19
Artefact Series II Door Furniture
Legend
Fire Rated
FIRE RATEDLockwood Artefact Door Furniture has been successfully fire tested up to 4 Hours (depending on the type of fire door) on fire door assemblies, in accordance with Australian Standard AS 1905.1 – 1997, Part 1: Fire-resistant doorsets.
SecurityS3 HIGH SECURITY
All Lockwood Artefact Door Furniture conforms with level S3 (Physical Security) Australian Lock Standard. (Standard Number AS 4145.2: 1993).
DurabilityDURABILITY
All Lockwood Artefact Door Furniture conforms with level D3 (Durability) Australian Lock Standard (Standard Number AS 4145.2: 1993).
Corrosion ResistanceANTI-CORROSION
This product has been successfully tested in accordance with AS 2331-3.1: 1980. Neutral Salt Spray Test (NSS TEST).
Functions
Slotted Button Indicating Slotted Button Disabled Turn Snib Flush Pull Turn Snib
Standards
Concealed Fixed Visible FixedConcealed
Fixed Visible FixedConcealed
Fixed Visible Fixed
Plates
20
Artefact Series II Door Furniture
1300 LOCK UP (1300 562 587) lockweb.com.au
Plate Type
200
Plate Function
01
Engraving
N
Cylinder Shape
A
Lever/ Knob
96
Handing
L
Finish
SS
Plate Type
Exterior Plate (162 x 162) – Square Corners 200
Interior Plate (162 x 162) – Square Corners 201
Exterior Plate (162 x 162) – Radius Corners 202
Interior Plate (162 x 162) – Radius Corners 203
Exterior Plate (250 x 200) 206
Interior Plate (250 x 200) 207
Exterior Plate (324 x 162) 208
Interior Plate (324 x 162) 209
Exterior Plate (162 x 50) – Oval 212
Interior Plate (162 x 50) – Oval 213
Exterior Plate (300 x 100) – Radius Corners 214
Interior Plate (300 x 100) – Radius Corners 215
Exterior Plate (300 x 65) – Radius Corners 216
Interior Plate (300 x 65) – Radius Corners 217
Exterior Plate (250 x 50) – Radius Corners 218
Interior Plate (250 x 50) – Radius Corners 219
Exterior Plate (162 x 50) – Rectangular 224
Interior Plate (162 x 50) – Rectangular 225
Plate Function
Cylinder Only 00
Cylinder & Lever 01
Emergency Turn Only 02
Emergency Turn & Lever 03
Turn Knob & Lever 04
Lever Only 05
Turn Knob Only 06
Plain Plate 07
Cylinder & Fixed Lever 08
Fixed Lever Only 09
Dual Cylinder 10
Privacy Indicator Emergency Turn Only 13
Privacy Indicator Emergency Turn & Lever 14
Privacy Indicator Turn Knob Only 15
Privacy Indicator Turn Knob & Lever 16
Cylinder, Lever & LED 20
Cylinder, Fixed Lever & LED 21
Lever & LED 22
Cylinder & LED 23
Pull Handle Only 24
Pull Handle & Cylinder 25
Pull Handle & Emergency Turn 26
Pull Handle & Turn Knob 27
Pull Handle & Privacy Indicator Emergency Turn 28
Pull Handle & Privacy Indicator Turn Knob 29
Pull Handle & Dual Cylinder 30
Flush Pull Only 31
Flush Pull & Cylinder 32
Flush Pull & Emergency Turn 33
Flush Pull & Turn Knob 34
Flush Pull & Privacy Indicator Emergency Turn 35
Flush Pull & Privacy Indicator Turn Knob 36
Flush Pull & Dual Cylinder 37
Disabled Turn Only 38
Disabled Turn & Lever 39
Privacy Indicator Disabled Turn 40
Privacy Indicator Disabled Turn & Lever 41
Pull Handle & Disabled Turn 42
Engraving
A – G Outlined Infill R – X Full Infill
Male symbol A R
Male text B S
Female symbol C T
Female text D U
Disabled symbol E V
Push text F W
Pull text G X
Unisex symbol H Y
No option N
Miscellaneous text* P
Corporate Engraving** Q * Separate charge per letter** Separate charge per logoFor all in-filled engraving, black gloss is the standard.
Cylinder Shape
Oval Cylinder – 32mm (H) x 18mm (W) Lockwood 570 Cylinders A
Guarded Oval Cylinder – 32mm (H) x 18mm (W) Lockwood 570 Cylinders B
No Cylinder Function N
Lever/ Knob Type
Brass Levers and Knobs
00 53* 7820 55 7932 59 79B40 61* 8041* 62 9044 70 9145 71 94*48* 74 97
Stainless Steel Levers
96 98
Aluminium Levers/Knobs
20 88 9698
Brass Pull Handles
01 02 0304 05 0607 08 0910
Stainless Steel Pull Handles
07 08 0910 16 1718 19
Aluminium Pull Handles
75
* Denotes handed levers
Handing
Left LRight R
Finish
Stainless Steel Finishes
Satin Stainless Steel SS
Polished Stainless Steel PS
Powdercoat PCAluminium Finishes
Natural Anodised NT
Brass Finishes
Polished Brass PB
2000 Series
Ordering Procedures
/
Lockwood Catalogue
21
Artefact Series II Door Furniture
Exterior Rose Type
260
Escutcheon
280
Interior Rose Type
261
Rose Shape
SQ
Lever/ Knob
96
Rose Shape
SQ
Finish
SS
Handing Finish
SS
Plate Type
Exterior Rose Type 260
Exterior Round Blank Rose 262
Exterior Round Rose – Fixed Lever 264
Plate Function
Interior Round Rose 261
Interior Round Blank Rose 263
Interior Round Rose – Fixed Lever 265
Rose Shape
Round –
Square SQ
Lever/ Knob Type
Brass Levers and Knobs
00 53* 7820 55 7932 59 79B40 61* 8041* 62 9044 70 9145 71 94*48* 74 97
Stainless Steel Levers
96 98
Aluminium Levers/Knobs
20 88 9698
* Denotes handed levers
Handing
Left LRight RNon Handed –
Finish
Stainless Steel Finishes
Satin Stainless Steel SS
Polished Stainless Steel PS
Powdercoat PCAluminium Finishes
Natural Anodised NT
Brass Finishes
Polished Brass PB
Escutcheon
Oval Cylinder Escutcheon – 32mm (H) x 18mm (W) Lockwood 570 Cylinders 280
Turn Knob Escutcheon 281
Emergency Turn Escutcheon 282
Disabled Turn Knob Escutcheon 286
Euro Profile Cylinder Escutcheon 287
Rose Shape
Round –
Square SQ
Finish
Stainless Steel Finishes
Satin Stainless Steel SS
Polished Stainless Steel PS
Powdercoat PC
Aluminium Finishes
Natural Anodised NT
Brass Finishes
Polished Brass PB
260 Series
206 Series
Ordering Procedures
/ /
Specification Service
For all Architectural hardware specification assistance refer to your local ASSA ABLOY Sales Office.
A fully comprehensive, obligation free, Architectural Door Hardware specification can be prepared by Architectural Hardware Representatives.
Product Caring
Please go to lockweb.com.au for details on product caring.
Quality Endorsed Company
SAI Global operates a program which assesses the quality procedures and capabilities of an organisation in termsof the requirements of specific Australian and International Standards
for Quality Systems. Following assessment by SAI Global, ASSA ABLOY Australia Pty Limited, 235 Huntingdale Rd, Oakleigh VIC 3166 have been granted a certificate of registration as a quality endorsed company complying with the requirements of AS 3902/ISO 9001 – Quality Systems for Production and Installation.
DisclaimerWhilst every effort has been made to ensure that the information contained in this catalogue is accurate at the time of publication, ASSA ABLOY recommends that you consult ASSA ABLOY or its agents prior to placing an order to ascertain current information on specific products, as ASSA ABLOY reserves the right to make changes without notice. ASSA ABLOY will not be liable for any injury, loss or damage whatsoever, arising from any errors or omissions in the information contained in the catalogue or arising from the use or application of the information contained herein. This catalogue does not constitute an offer for the sale of any particular product.
Lockwood Guarantee Please go to lockweb.com.au for full details of the Lockwood Guarantee.
Quality ISO 9001
EnvironmentISO 14001
Headline
ASSA ABLOY, the global leader in door opening solutions
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience
Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers.
ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.
ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America.
As the world’s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market.
Australia 1300 LOCK UP (1300 562 587) lockweb.com.au
New Zealand Telephone +64 9415 7888assaabloy.co.nz
ASSA ABLOY Australia Pty Limited ABN 90 086 451 907 ©2009
ASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia
info.au@assaabloy.comassaabloy.com.au
ASSA ABLOY New Zealand Ltd. 6 Armstrong RoadAlbany, North Shore City, 0632New Zealand
info.nz@assaabloy.comassaabloy.co.nz
AAA-
CAT-
039
MS0
575