Post on 09-Nov-2021
Rockwood ProductsPrice Book - Architectural Series
USA & Canada Prices Effective May 1, 2021
Architectural Door Accessories
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.2
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
TA
BLE
OF
CO
NT
EN
TS
*Santoprene™ is a registered trademark of the Exxon Mobil Corporation.
Table of Contents
General Information 2-5
Numeric Index 3
Ordering Information 4
Post Mounted Pulls/General Information 5
Architectural Pulls 6-55
AccenTek™ (solid pulls with accents) 41
AccenTek™ (solid groove pulls) 41
ArborMet (wood grip pulls) 33-35
ArborTek (wood grip pulls) 36-39
BandWidth (collar mount pulls) 14-15
CenTrex (shaped pulls) 40
Classic (finial pulls) 43
Edge Pulls (for closet doors) 8
Flush Pulls 7
GeoMetek (hex, diamond & narrow profile pulls) 55-57
Groove (straight & offset pulls) 19
LineaMax (grooved pulls) 25-28
Locking Door Pull System 58-61
MariTek (tapered pulls) 43
MegaCurve (long curved pulls) 12
MegaTek (straight & offset pulls) 20-22
MezzoTek (necked post pulls) 13
NeoCylinder (w/ or w/o GripZone) 54
NeoMax (pulls w/GripZone) 23-25
NeoMetrix (w/GripZone) 19
NeoMitre (w/ or w/o GripZone) 54
NoirMet (black anodized grip) 29-30
NoirTek (black anodized grip) 31-32
OvalTek (true oval grip) 16
OvalTek (flat oval grip) 17
Panic Device 62
PlanTek (flat front pulls) 42
RightAngles (w/ or w/o GripZone) 7
SkewTek (angled end pulls) 39
Strikes 63
SoftMet (*Santoprene™ grip) 18
SoftTek (Santoprene™ grip) 18
Traditional (decorative pulls & plates) 43
Tubular (1 ¼" and 1 ½" diameter pulls) 6
Leather Architectural Pulls 44-52
English Bridle Leather (straight & offset pulls) 44-45
Flush Leather Pulls 49-51
Leather Oval (ergonomic pulls) 48
Upholstery Leather GeoMetek 52
Upholstery Leather (straight & offset pulls) 46-47
Small Architectural Pulls 7-53
ArborMet 12
GripZone 11
Groove 11
Leather 53
MegaTek 10
NoirMet 12
Wire 7
Architectural Accessories 8-9
Coat Hooks 8
Door Stops 9
Push Plates, Pull Plates and Signage 9
Architectural Finishes 64
Mounting Types 65
Mounting Details 66-67
Fasteners - Spare Parts 68-70
Mounting Kits 71
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 3
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
Numeric Index
NU
ME
RIC
IN
DE
X
570 Dust Proof Strike.................................. 61
DGBKIT Bushing Kit for Glass Doors ............. 61
DP3301 MegaTek Dummy Pull (round) ....... 61
DP3401 NeoTek Dummy Pull ........................... 61
DP7901 GeoMetek Dummy Pull (square) .... 61
ESK-SGL Panic Strike Kits .................................... 63
ESK-MS-SGL Panic Strike Kits .................................... 63
EES-310-1-3/4 Electric Strike Kits ................................ 63
FL3301 Flat Latch Locking Pull ....................... 62
LP3301 Locking Pull PostMount .................... 58
LP3305 Locking Pull PostMount .................... 58
LP3401 Locking Pull NeoTek ........................... 59
LP6061 Locking Pull English Bridle .........59-60
Leather Wrapped
LP6161 Locking Pull Upholstery .................... 60
Leather Wrapped
LP6440 Locking Pull Upholstery .................... 61
Leather Wrapped
LP7901 Locking Pull GeoMetek ..................... 61
LPS01 - LPS12 Locking Pull Strikes ............................. 61
PDU8500 - Panic Device .......................................... 62
PDU8500-6
RM201 - RM372 Tubular .......................................................6
RM405 - RM423 RightAngles ..............................................7
RM710 - RM735 Small Pulls (Wire) ...................................7
RM751 - RM760 Edge Pulls - for Closet Doors ..............8
RM780 - RM790 Flush Pulls ..................................................7
RM801 - RM843 Coat Hooks ...............................................8
RM850 - RM877 Door Stops ................................................9
RM1010 - RM1160 Push Plates, Pull Plates, ........................9
and Signage
RM1200 - RM1270 Small Pulls (MegaTek, Groove) .. 10-11
RM1300 - RM1370 Small Pulls (GripZone) ...................... 11
RM1410 - RM1470 Small Pulls (NoirMet) ........................ 12
RM1510 - RM1570 Small Pulls (ArborMet) ...................... 12
RM2000 - RM2034 MegaCurve ............................................ 12
RM2110 - RM2150 MezzoTek ................................................ 13
RM2200 - RM2244 BandWidth ......................................14-15
RM2300 - RM2330 OvalTek (true oval) ............................. 16
RM2400 - RM2420 OvalTek (flat oval) ............................... 17
RM2510 - RM2544 SoftMet ................................................... 18
RM2610 - RM2640 SoftTek .................................................... 18
RM3010 - RM3060 NeoMetrix .............................................. 19
RM3100 - RM3154 See RM3300-RM3342
RM3101 - RM3131 Groove ..................................................... 19
RM3300 - RM3342 MegaTek ............................................20-22
RM3400 - RM3442 NeoMax .............................................23-25
RM3512 - RM3782 LineaMax ..........................................25-28
RM3800 - RM3854 NoirMet .............................................29-30
RM3900 - RM3954 NoirTek ..............................................31-32
RM4000 - RM4054 ArborMet ..........................................33-35
RM4100 - RM4190 ArborTek ...........................................36-39
RM4200 - RM4274 SkewTek .................................................. 39
RM4400 - RM4516RH CenTrex ................................................... 40
RM4700 - RM4820 AccenTek™ ............................................. 41
RM5200 - RM5280 PlanTek .................................................... 42
RM5500 - RM5598 Traditional .............................................. 43
RM5650 - RM5670 Classic ...................................................... 43
RM5700 - RM5702 MariTek .................................................... 43
RM6060 - RM6092 English Bridle Leather ..................44-45
RM6160 - RM6192 Upholstery Leather .......................46-47
RM6200 - RM6240 Leather Oval .......................................... 48
RM6300 - RM6354 Flush Leather Pulls ........................49-51
RM6400 - RM6440 Upholstery Leather GeoMetek ....... 52
RM6500 - RM6730 Small Pulls (Leather) .......................... 53
RM7210 - RM7240 NeoCylinder .......................................... 54
RM7300 - RM7450 NeoMitre ................................................ 54
RM7700 GeoMetek (Hexagonal) .................... 55
RM7800 - RM7865 GeoMetek (Diamond) ....................... 55
RM7900 - RM7960 GeoMetek (Narrow Profile) .......56-57
SP1001 - SP1082 Fasteners - Spare Parts ................68-70
KIT1 - KITRM380G Mounting Kits ....................................... 71
No. Description Page No. Description Page
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.4
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
OR
DE
RIN
G I
NFO
RM
AT
ION
Ordering InformationThis price list cancels and supersedes all prior listings.
Orders are accepted with the understanding that they will be billed at prices in effect at time of shipment.
Prices are subject to change without notice.
We reserve the right to decline the whole or part of orders in which the price or quantity of goods is not acceptable to us.
NOTE: If matching pulls to a previous job, please provide original PO or Order #.
Easy Order PlacementUSA:
By Phone: 1-800-458-2424 Monday through Thursday 8:00 am ET to 7:30 pm ET, Friday 8:00 am ET to 4:30 pm ET
By Fax: Orders may be faxed to 1-800-922-9212
By Email: orders.rockwood@assaabloy.com
By Internet: http://extranet.assaabloydss.com/ and select Order Entry under the Customer Service Menu
Canada:
By Phone: 1-800-461-3007 Monday through Friday 8:00 am ET to 4:30 pm ET
By Fax: Orders may be faxed to 1-800-461-8989
By Email: cavau-orders@assaabloy.com
By Internet: http://extranet.assaabloydss.ca/ and select Order Entry under the Customer Service Menu
Terms and Conditions of SaleTerms: 1% 15 days, net 30 days
Remit Payment To: PNC Bank/Rockwood, PO Box 644489, Pittsburgh, PA 15264-4489
For Terms & Conditions and Warranty information pertaining to product sales in Canada, please visit www.assaabloy.ca/terms
Freight PolicyFreight Allowance: All prices are F.O.B. Rockwood, Pennsylvania and/or Ventura, California. Full freight will be allowed on shipments of $1,250 net and
over within the continental limits of the United States. All shipments are routed most cost effective route of our choice. We reserve the right to desig-
nate the carrier.
Special Order MaterialSpecial items made to your specifications are not returnable. These items are not subject to cancellation without consideration of expense involved at
the cancellation date.
SamplesSalable samples will be charged at regular prices.
Returned GoodsReturn no merchandise without written permission from the factory. Authorization will insure your receiving proper credit. Errors in shipping may
occasionally occur. If this is the case immediately notify the factory, and we will gladly make the proper adjustments. If the error is at the customer’s
end, a minimum charge of 25% plus freight will be incurred for handling. Unauthorized claims for labor or charges will not be allowed. No credit will be
allowed beyond six months after invoice date.
ShortagesClaims for shortages must be made within 30 days of invoice date.
TemplatesUpon request we will furnish templates for any of our standard items of manufacture. Commonly used templates are available on our website at
www.assaabloydooraccessories.us.
Product Weight InformationNOTE: Weights indicated throughout the price list are approximate for brass, bronze or stainless steel base material. Aluminum base materials weigh
approximately 1/3 the listed weights.
EngravingEngraving may be added on many pulls and plates. Call factory for pricing.
Safer2Open™ SolutionsSafer2Open™ Solutions available on select Architectural Pulls with a straight post. Configure extended posts and/or closer posts, to easily allow for your
arm to be placed above, below, or through the pull, limiting touch points.
For Terms and Conditions as well as Warranty information pertaining to product sales in Canada, please visit www.assaabloy.ca/terms
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 5
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
PO
ST
MO
UN
TE
D P
ULL
S /
GE
NE
RA
L IN
FOR
MA
TIO
N
Post Mounted PullsIt is our goal that you get the best possible functional and aesthetic door pull from our wide selection. On long door pulls
there will naturally be a small amount of flexing between mounting points that are far apart. We offer the following guidelines
to help you determine when a mid-post is required or when you should consider altering the location of the mounting posts
(by moving them closer together) in order to minimize the flexing of the grip. Making the grip rigid by adding a mid-post is the
ideal condition for long pulls on all doors but is particularly important on all glass doors that have an inherent flexing in the
door itself. The combined flexing of the door and the pull can loosen mechanical joints and stress the fasteners.
Our recommendations for adding a mid-post to long door pulls is based on a theoretical pull load of 30 lbs. (foot pounds)
maximum to open the door, which is a greater than the typical force required to open an average door. The maximum amount
of deflection of the grip you will see at that force is 3/8". The conditions on your job site can vary due to door weight, wind
loading, closer settings, locked doors being aggressively pulled and other circumstances. It is our recommendation that you
add a mid-post if there is any question about heavy or hard to open doors; having an extra mounting point always makes for a
more stable and durable installation.
Center toCenter (CTC)
Diameter(Dia.)
On long pulls, post can be positioned closer to each other
and farther away from ends as a strategy to avoid mid-post
if door condition permits.
POST MOUNTED PULLS SHAPES AND SIZES
SHAPE MATERIAL MATERIAL Size MAXIMUM CTC
Round
Stainless Steel
1" 70"
1 1/4" 90"
1 1/2" 110"
Brass/Bronze
1" 57"
1 1/4" 73"
1 1/2" 87"
Aluminum
1" 66"*
1 1/4" 90"*
1 1/2" 115"*
Oval
Stainless Steel
1" x 1 1/2" 100"
1" x 1 7/8" 119"
Flat Oval
Stainless Steel 3/4" x 1 1/2" 93"
Square
Stainless Steel
3/4" x 3/4" 62"
1" x 1" 85"
Rectangular
Stainless Steel1/2" x 1 1/4" 86"3/4" x 1 1/2" 110"
Brass/Bronze 3/4" x 1 1/2" 89"
Rectangular
Stainless Steel1/2" x 1 1/4" 52"3/4" x 1 1/2" 75"
Brass/Bronze 3/4" x 1 1/2" 60"
Mid-Post
Overall(OA)
Clearance
Projection* The maximum length of anodized aluminum pulls is 87” due to our tank size.
Longer aluminum pulls are available in satin finish and clear coated or powder
coat paint.
*The maximum length to powder coat a pull is 118".
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.6
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
20
1 -
RM
37
2T
UB
UL
AR
Tubular - 1 1⁄4" & 1 1⁄2" Diameter Pulls
Straight Pulls
Part CTC Dia. 28/628313/710315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM301 12" 1 1⁄4" 152 168 385 416 218 144 163 212 237
RM302 18" 1 1⁄4" 170 188 409 441 242 167 187 244 272
RM303 24" 1 1⁄4" 188 207 431 465 265 188 211 276 308
RM304 36" 1 1⁄4" 225 248 477 517 349 232 260 338 377
RM321 12" 1 1⁄2" 170 187 467 504 257 181 203 264 295
RM322 18" 1 1⁄2" 188 207 491 530 280 203 227 296 330
RM323 24" 1 1⁄2" 206 227 514 555 302 224 250 326 366
RM324 36" 1 1⁄2" 242 268 560 604 387 267 299 390 437
90˚ Offset Pulls
RM201 12" 1 1⁄4" 173 198 293 309 252 177 216 246 287
RM202 18" 1 1⁄4" 189 216 327 342 274 197 237 271 312
RM203 24" 1 1⁄4" 204 233 359 375 295 216 255 303 345
RM204 36" 1 1⁄4" 239 266 431 448 359 242 284 335 377
RM221 12" 1 1⁄2" 224 245 350 375 280 203 255 295 329
RM222 18" 1 1⁄2" 239 257 390 409 347 230 284 335 374
RM223 24" 1 1⁄2" 257 273 440 456 373 253 312 372 414
RM224 36" 1 1⁄2" 291 307 519 537 407 287 344 419 466
Push Bars - Add $6/in. per bar for extra length bars over 36".
RM350 Up to 36" 1 1⁄4" 224 250 327 350 280 203 227 296 303
RM370 Up to 36" 1 1⁄2" 257 283 390 422 366 247 277 361 404
Straight Push Pull Sets - Specify Push Bar CTC. Add $6/in. per bar for extra length bars over 36".
RM351 12" 1 1⁄4" 354 397 573 618 496 368 413 537 552
RM352 18" 1 1⁄4" 363 405 606 654 509 381 426 557 567
RM371 12" 1 1⁄2" 439 481 687 743 565 433 484 631 706
RM372 18" 1 1⁄2" 464 506 710 766 620 458 514 671 748
Offset Push Pull Sets - Specify Push Bar CTC. Add $6/in. per bar for extra length bars over 36".
RM251 12" 1 1⁄4" 416 464 638 687 526 397 444 578 610
RM252 18" 1 1⁄4" 430 481 670 723 544 413 462 603 631
RM271 12" 1 1⁄2" 497 540 759 821 627 466 521 679 758
RM272 18" 1 1⁄2" 519 558 800 864 654 492 550 717 799
Heavy Duty 30˚ Offset Pulls
Part CTC Dia. 28/628313/710315/711
3/605 4/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM257 10" 1 1⁄4" 182 198 394 426 374 255 286 372 409
RM258 12" 1 1⁄4" 198 216 422 457 398 278 313 406 435
RM259 18" 1 1⁄4" 204 224 466 503 429 307 343 448 470
NOTE: Engraving "Push" or "Pull" add $103.00 (1/2" letter height).
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM201
RM352
RM301
30°
RM257
RM350
RM251
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 7
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
40
5 -
RM
79
0R
IGH
T A
NG
LES
/ S
MA
LL P
ULL
S /
FLU
SH
PU
LLS
RightAngles - with or without GripZone
Without GripZone (RM410-RM413 specify handing and height x width when ordering.)
Part 28/628313/710315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM405-15 274 311 453 490 390 229 258 331 375
RM410 (leg up) 566 651 969 1,046 723 472 542 685 789
RM411 (leg down) 566 651 969 1,046 723 472 542 685 789
RM412 (leg up) 963 1,100 1,094 1,183 1,127 799 915 1,164 1,331
RM413 (leg down) 963 1,100 1,094 1,183 1,127 799 915 1,164 1,331
With GripZone (RM420-RM423 specify handing and height x width when ordering.)
Part 3/605 9/611 32/629 32316
RM415-15 622 719 447 836
RM420 (leg up) 1,224 1,403 873 1,630
RM421 (leg down) 1,224 1,403 873 1,630
RM422 (leg up) 1,582 1,819 1,115 2,116
RM423 (leg down) 1,582 1,819 1,115 2,116
Small Pulls - for Cabinets, Casework and Closets
Flush Pulls
Flush Pulls
Part Size3/6054/606 10B/613
Stock PC 10BE
26/625 26D/626
RM780 2 3⁄16" x 3 1⁄4" 41 45 45 45
RM782 2 11⁄16" x 4 3⁄16" 45 48 48 48
RM785 3 1⁄2" Dia. 56 50 60 59
Flush Cup Pull
Part OAStock PC
10BE 32D/630 32/629
RM790 14" 179 121 134
26" 211 142 160
38" 228 169 190
RM410
RM415
RM422
RM710
RM715
RM785RM790
RM782
NOTE: If ordering pull to mate with this product, the CTC of the pull needs to be 2" less than the overall of the flush pull.
Order form available when ordering.
Wire Pulls - without base plates
Part CTC Dia.3/6054/606 10B/613
Stock PC 10BE
26/62526D/626 32D/630 32/629
RM710-4 4" 3/8" 39 42 41 39 24 26
RM710-5 5" 3/8" 40 43 42 40 25 27
RM710-6 6" 3/8" 42 46 44 43 26 30
RM720-4 4" 1/2" 48 52 47 48 26 30
RM720-5 5" 1/2" 49 53 49 49 27 32
RM720-6 6" 1/2" 51 54 51 51 30 34
RM730-5 5" 5/8" 55 59 54 55 32 35
RM730-6 6" 5/8" 57 60 55 57 33 36
RM730-7 7" 5/8" 58 64 56 58 34 37
Wire Pulls - with base plates
RM715-4 4" 3/8" 60 65 64 60 44 48
RM715-5 5" 3/8" 64 69 67 64 46 50
RM715-6 6" 3/8" 65 70 68 68 47 55
RM725-4 4" 1/2" 73 77 71 73 48 56
RM725-5 5" 1/2" 74 78 72 74 49 57
RM725-6 6" 1/2" 75 82 74 75 50 58
RM735-5 5" 5/8" 78 86 74 78 50 58
RM735-6 6" 5/8" 82 88 77 82 54 60
RM735-7 7" 5/8" 83 90 78 83 55 61
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.8
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
75
1 -
RM
84
3E
DG
E P
ULL
S /
CO
AT
HO
OK
S
Edge Pulls - for Closet Doors
• Specifying Information: 1. Select style pull number; 2. Select standard length [2", 2 1⁄2", 3", 4", 5", 6", 12" (max)];
3. Specify door thickness [Example: RM752-4" 32D 1 3⁄4" door]* RM760 cannot be modified.
Order form available when ordering.
Coat Hooks
Part Size3/6054/606 10B/613
Stock PC 10BE
26/62526D/626 32D/630
RM801 1 1⁄4" x 1 3⁄4" 72 76 75 75 54
RM802 1 1⁄4" x 2 3⁄4" 73 77 76 76 57
RM803 1" x 2" 72 76 75 69
RM804 1" x 3" 73 77 76 70
RM805 1" x 1 3⁄4" 89 98 95 98
RM806 1" x 3" 98 107 103 107
RM807 1 1⁄4" x 2 3⁄4" 109 118 114 118
RM808 1 1⁄4" x 3 1⁄2" 118 127 124 125
RM811 3⁄4" x 1 1⁄2" 49 52 50 49
RM812 1 1⁄4" x 2 1⁄4" 51 55 54 51
Part Size Stock PC/10BE 15/619
RM817 Square 1 3⁄4", 2 11⁄16" Projection 56 55
Part Size
3/6054/606
10B/613Stock PC
10BE 32D/630 32/629
RM820 1⁄2" x 1 5⁄8" 57 41
RM821 5⁄8" x 2 1⁄8" 58 42
RM822 1⁄2" x 1 1⁄2" 41 28
RM823 5⁄8" x 2" 43 29
RM828 3⁄4"W x 2 7⁄8" 85 68 54 74
RM829 3⁄4"W x 1 7⁄8" 76 66 68 70
LineaMet Coat HooksRM830 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68
RM831 5⁄8" x 2 1⁄8" 88 63 68
ArborMet Coat HooksRM835 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68
RM836 5⁄8" x 2 1⁄8" 88 63 68
SoftMet Coat HooksRM838 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68
RM839 5⁄8" x 2 1⁄8" 88 63 68
Groove Coat HooksRM840 (w/base plate) 1⁄2" x 1 5⁄8" 72 49
RM841 (w/base plate) 5⁄8" x 2 1⁄8" 76 53
RM842 1⁄2" x 1 1⁄2" 63 41
RM843 5⁄8" x 2" 66 43
Square Edge Door
Part Max OA
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM751 Up to 12" 104 111 101 79 88
RM752 Up to 12" 107 114 104 82 91
Bevel Edge DoorRM753 Up to 12" 109 118 107 84 95
RM754 Up to 12" 111 120 110 88 99
Double Edge Pull - Square EdgeRM755 Up to 12" 204 220 183 158 177
Concealed Edge Pull
Part Size3/6054/606
10/61210B/613
Stock PC 10BE
26/62526D/626
RM760 1" x 4 1⁄4" 55 59 58 59
RM752
RM801
RM817
RM820
RM830
RM839
RM842
RM760
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 9
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
85
0-R
M1
16
0D
OO
R S
TO
PS
/ P
LA
TE
S &
SIG
NA
GE
Push Plates, Pull Plates and Signage
Black bumpers available. Suffix BB after part number.Ex:) RM850BB.32D Add on charge will apply.
Door Stops
Floor Mounted
Part Height3/6054/606
10/61210B/613
Stock PC 10BE
26/62526D/626 32D/630
RM850 1 1⁄2" 27 28 41 20 32
RM851 2 1⁄2" 60 67 64 60 52
RM855 1 3⁄4" 53 57 55 49 45
RM856 2 3⁄4" 65 70 68 65 55
Part Size Stock PC 10BE 15/619
RM857 Square 1" Base, 2 3⁄4" Projection 68 68
Wall Mounted
Part Projection3/6054/606
10/61210B/613
Stock PC 10BE
26/62526D/626 32D/630
RM860 1 3⁄32" 31 33 33 30 24
RM861 1 3⁄32" 31 33 33 30 24
Part Size Stock PC 10BE 15/619
RM867 Square 1 3⁄4" Base, 3⁄4" Projection 54 53
Base Board Mounted
Part Projection3/6054/606
10/61210B/613
Stock PC 10BE
26/62526D/626 32D/630
RM870 1 1⁄2" 42 46 44 39 27
RM871 3 1⁄4" 42 46 44 39 27
RM872 3 3⁄4" 42 46 44 39 27
RM875 1 1⁄2" 59 64 61 59 42
RM876 3 1⁄4" 59 64 61 59 42
RM877 3 3⁄4" 59 64 61 59 42
Square Corner - Adhesive Mount
Part Size3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM1010 4" x 22" 60 66
RM1010H 4" x 22" 89 100
RM1010L 4" x 22" 89 100
Square Corner - Screw MountRM1020 4" x 22" 95 105 72 43 49
RM1020H 4" x 22" 126 146 107 75 84
RM1020L 4" x 22" 134 146 107 75 84
Radius End Corner - Adhesive MountRM1030 4" x 22" 75 84
RM1030H 4" x 22" 105 117
RM1030L 4" x 22" 105 117
Radius End Corner - Screw MountRM1040 4" x 22" 116 127 89 60 66
RM1040H 4" x 22" 153 166 122 89 100
RM1040L 4" x 22" 153 166 122 89 100
Indicator Plates - Adhesive Mount
Part Size3/605 4/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM1110H 1" Dia. 78 90 87 63 70
RM1110L 1" Dia. 78 90 87 63 70
RM1120H 2 1⁄2" Dia. 78 90 87 63 70
RM1120L 2 1⁄2" Dia. 78 90 87 63 70
RM1150M 2" x 4" 85 98 92 70 79
RM1150W 2" x 5 3⁄4" 88 101 95 73 81
Indicator Plates - Screw MountRM1160M 2" x 4" 85 98 92 70 79
RM1160W 2" x 5 3⁄4" 88 101 95 73 81
RM850
RM857
RM867
RM876
RM1010
RM1030
RM1120H
RM1120L
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.10
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
12
00
-RM
12
70
SM
ALL
PU
LLS
(M
EG
AT
EK
)
MegaTek - Small Pulls for Cabinets, Casework & Closet Doors
Straight - Flat Ends
Part Max OA Dia.3/6054/606 10/612 10B/613
Stock PC10BE 32D/630 32/629
RM1200-4 5 7⁄8" 1⁄2" 64 69 54 26 30
RM1200-5 6 7⁄8" 1⁄2" 65 72 55 27 31
RM1200-6 7 7⁄8" 1⁄2" 67 73 68 38 45
RM1200-8 9 7⁄8" 1⁄2" 70 75 72 44 48
RM1200-10 11 7⁄8" 1⁄2" 74 78 77 47 52
RM1200-12 13 7⁄8" 1⁄2" 83 91 80 50 58
RM1200-18 19 7⁄8" 1⁄2" 111 120 85 55 62
RM1200-24 25 7⁄8" 1⁄2" 127 138 97 66 75
RM1200-30 31 7⁄8" 1⁄2" 151 162 109 77 85
RM1210-5 6 7⁄8" 5⁄8" 85 90 67 37 43
RM1210-6 7 7⁄8" 5⁄8" 86 91 71 42 47
RM1210-7 8 7⁄8" 5⁄8" 86 92 78 48 55
RM1210-8 9 7⁄8" 5⁄8" 88 94 80 50 58
RM1210-10 11 7⁄8" 5⁄8" 100 109 82 52 60
RM1210-12 13 7⁄8" 5⁄8" 107 114 85 55 62
RM1210-18 19 7⁄8" 5⁄8" 147 158 101 72 80
RM1210-24 25 7⁄8" 5⁄8" 167 181 113 81 92
RM1210-30 31 7⁄8" 5⁄8" 200 218 122 89 99
Offset - Flat EndsRM1230-5 6 7⁄8" 5⁄8" 112 80 90
RM1230-6 7 7⁄8" 5⁄8" 113 81 91
RM1230-7 8 7⁄8" 5⁄8" 116 84 93
RM1230-8 9 7⁄8" 5⁄8" 120 88 99
RM1230-10 11 7⁄8" 5⁄8" 122 89 100
RM1230-12 13 7⁄8" 5⁄8" 124 91 102
RM1230-18 19 7⁄8" 5⁄8" 149 103 115
RM1230-24 25 7⁄8" 5⁄8" 165 116 130
RM1230-30 31 7⁄8" 5⁄8" 169 122 136
Straight - Round EndsRM1240-4 5 7⁄8" 1⁄2" 75 82 82 75 46 52
RM1240-5 6 7⁄8" 1⁄2" 76 83 83 77 47 54
RM1240-6 7 7⁄8" 1⁄2" 77 85 85 78 48 55
RM1240-8 9 7⁄8" 1⁄2" 81 88 88 82 52 58
RM1240-10 11 7⁄8" 1⁄2" 83 91 91 87 57 64
RM1240-12 13 7⁄8" 1⁄2" 90 95 95 92 62 69
RM1240-18 19 7⁄8" 1⁄2" 116 127 127 110 66 74
RM1240-24 25 7⁄8" 1⁄2" 137 147 147 117 74 82
RM1240-30 31 7⁄8" 1⁄2" 153 166 166 130 85 95
RM1250-5 6 7⁄8" 5⁄8" 90 95 87 57 64
RM1250-6 7 7⁄8" 5⁄8" 92 100 88 58 65
RM1250-7 8 7⁄8" 5⁄8" 94 104 89 60 66
RM1250-8 9 7⁄8" 5⁄8" 98 106 91 61 68
RM1250-10 11 7⁄8" 5⁄8" 109 116 93 63 70
RM1250-12 13 7⁄8" 5⁄8" 113 124 96 65 73
RM1250-18 19 7⁄8" 5⁄8" 151 164 109 77 87
RM1250-24 25 7⁄8" 5⁄8" 174 187 122 89 101
RM1250-30 31 7⁄8" 5⁄8" 204 219 127 95 105
Offset - Round EndsRM1270-5 6 7⁄8" 5⁄8" 124 92 102
RM1270-6 7 7⁄8" 5⁄8" 125 92 103
RM1270-7 8 7⁄8" 5⁄8" 126 93 104
RM1270-8 9 7⁄8" 5⁄8" 129 96 106
RM1270-10 11 7⁄8" 5⁄8" 130 98 108
RM1270-12 13 7⁄8" 5⁄8" 133 100 111
RM1270-18 19 7⁄8" 5⁄8" 149 114 128
RM1270-24 25 7⁄8" 5⁄8" 160 125 138
RM1270-30 31 7⁄8" 5⁄8" 165 129 143
RM1250
RM1230
RM1210
RM1270
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 11
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
12
11
-RM
13
70
GR
OO
VE
/ S
MA
LL P
ULL
S (
w/G
RIP
ZO
NE)
Straight - Flat EndsPart Max OA Dia. 32/629
RM1300-4 5 7⁄8" 1⁄2" 66
RM1300-5 6 7⁄8" 1⁄2" 68
RM1300-6 7 7⁄8" 1⁄2" 69
RM1300-8 9 7⁄8" 1⁄2" 70
RM1300-10 11 7⁄8" 1⁄2" 73
RM1300-12 13 7⁄8" 1⁄2" 78
RM1300-18 19 7⁄8" 1⁄2" 82
RM1300-24 25 7⁄8" 1⁄2" 95
RM1300-30 31 7⁄8" 1⁄2" 104
Straight - Flat EndsRM1310-5 6 7⁄8" 5⁄8" 75
RM1310-6 7 7⁄8" 5⁄8" 76
RM1310-7 8 7⁄8" 5⁄8" 77
RM1310-8 9 7⁄8" 5⁄8" 78
RM1310-10 11 7⁄8" 5⁄8" 80
RM1310-12 13 7⁄8" 5⁄8" 82
RM1310-18 19 7⁄8" 5⁄8" 100
RM1310-24 25 7⁄8" 5⁄8" 110
RM1310-30 31 7⁄8" 5⁄8" 124
Offset - Flat EndsRM1330-5 6 7⁄8" 5⁄8" 110
RM1330-6 7 7⁄8" 5⁄8" 111
RM1330-7 8 7⁄8" 5⁄8" 112
RM1330-8 9 7⁄8" 5⁄8" 116
RM1330-10 11 7⁄8" 5⁄8" 118
RM1330-12 13 7⁄8" 5⁄8" 124
RM1330-18 19 7⁄8" 5⁄8" 136
RM1330-24 25 7⁄8" 5⁄8" 149
RM1330-30 31 7⁄8" 5⁄8" 159
Straight - Round EndsPart Max OA Dia. 32/629
RM1340-4 5 7⁄8" 1⁄2" 76
RM1340-5 6 7⁄8" 1⁄2" 77
RM1340-6 7 7⁄8" 1⁄2" 78
RM1340-8 9 7⁄8" 1⁄2" 80
RM1340-10 11 7⁄8" 1⁄2" 82
RM1340-12 13 7⁄8" 1⁄2" 91
RM1340-18 19 7⁄8" 1⁄2" 98
RM1340-24 25 7⁄8" 1⁄2" 104
RM1340-30 31 7⁄8" 1⁄2" 116
Straight - Round EndsRM1350-5 6 7⁄8" 5⁄8" 88
RM1350-6 7 7⁄8" 5⁄8" 89
RM1350-7 8 7⁄8" 5⁄8" 90
RM1350-8 9 7⁄8" 5⁄8" 91
RM1350-10 11 7⁄8" 5⁄8" 95
RM1350-12 13 7⁄8" 5⁄8" 98
RM1350-18 19 7⁄8" 5⁄8" 110
RM1350-24 25 7⁄8" 5⁄8" 124
RM1350-30 31 7⁄8" 5⁄8" 132
Offset - Round Ends RM1370-5 6 7⁄8" 5⁄8" 124
RM1370-6 7 7⁄8" 5⁄8" 125
RM1370-7 8 7⁄8" 5⁄8" 126
RM1370-8 9 7⁄8" 5⁄8" 128
RM1370-10 11 7⁄8" 5⁄8" 130
RM1370-12 13 7⁄8" 5⁄8" 132
RM1370-18 19 7⁄8" 5⁄8" 149
RM1370-24 25 7⁄8" 5⁄8" 159
RM1370-30 31 7⁄8" 5⁄8" 172
Groove - Small Pulls
Straight - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM1211-5 6 7⁄8" 5⁄8" 93 101 87 57 64
RM1211-6 7 7⁄8" 5⁄8" 94 102 88 58 65
RM1211-7 8 7⁄8" 5⁄8" 95 104 89 60 66
RM1211-8 9 7⁄8" 5⁄8" 98 106 91 61 68
RM1211-10 11 7⁄8" 5⁄8" 107 114 92 62 69
RM1211-12 13 7⁄8" 5⁄8" 112 123 96 65 73
GripZone - Small Pulls for Cabinets, Casework & Closet Doors
RM1300
RM1211
RM1330
RM1340
RM1370
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.12
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
14
10
- R
M2
03
4S
MA
LL P
ULL
S (
NO
IRM
ET,
AR
BO
RM
ET
) /
ME
GA
CU
RV
E
NoirMet - Small Pulls
MegaCurve - Long Curved Pulls
• Add $6.50/in. over 96".
Mid Bow
PartMax OA
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM2000 72" 2,057 2,223 1,489 1,233 1,382 1,797 2,004
84" 2,126 2,297 1,553 1,294 1,448 1,885 2,102
96" 2,194 2,370 1,618 1,354 1,517 1,973 2,201
RM2004 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171
84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268
96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366
Long Bow PullsRM2010 72" 2,697 2,911 2,042 1,746 1,908 2,480 2,768
84" 2,764 2,985 2,107 1,763 1,975 2,567 2,865
96" 2,831 3,058 2,172 1,823 2,042 2,656 2,963
RM2014 72" 2,827 3,053 2,153 1,849 2,070 2,692 3,003
84" 2,896 3,127 2,219 1,909 2,138 2,780 3,101
96" 2,963 3,200 2,283 1,969 2,204 2,868 3,198
45˚ PullsRM2020 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171
84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268
96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366
RM2024 72" 2,315 2,501 1,709 1,438 1,611 2,095 2,336
84" 2,383 2,573 1,775 1,499 1,679 2,183 2,435
96" 2,451 2,647 1,840 1,558 1,745 2,271 2,532
Triangle PullsRM2030 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171
84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268
96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366
RM2034 72" 2,315 2,501 1,709 1,438 1,611 2,095 2,336
84" 2,383 2,573 1,775 1,499 1,679 2,183 2,435
96" 2,451 2,647 1,840 1,558 1,745 2,271 2,532
Straight - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC10BE 32D/630 32/629
RM1410-5 6 7⁄8" 5⁄8" 147 160 109 77 85
RM1410-6 7 7⁄8" 5⁄8" 151 164 111 79 89
Offset - Flat EndsRM1430-5 6 7⁄8" 5⁄8" 156 122 137
RM1430-6 7 7⁄8" 5⁄8" 160 125 139
Straight - Round EndsRM1450-5 6 7⁄8" 5⁄8" 175 189 129 96 106
RM1450-6 7 7⁄8" 5⁄8" 179 191 133 100 110
Offset - Round EndsRM1470-5 6 7⁄8" 5⁄8" 180 141 159
RM1470-6 7 7⁄8" 5⁄8" 185 146 166
ArborMet - Small Pulls
Straight - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC10BE 32D/630 32/629
RM1510-5 6 7⁄8" 5⁄8" 155 167 113 81 93
RM1510-6 7 7⁄8" 5⁄8" 158 171 117 85 98
Offset - Flat EndsRM1530-5 6 7⁄8" 5⁄8" 165 129 145
RM1530-6 7 7⁄8" 5⁄8" 168 132 152
Straight - Round EndsRM1550-5 6 7⁄8" 5⁄8" 182 197 138 104 117
RM1550-6 7 7⁄8" 5⁄8" 187 200 142 107 124
Offset - Round EndsRM1570-5 6 7⁄8" 5⁄8" 187 150 171
RM1570-6 7 7⁄8" 5⁄8" 190 152 176
RM1410
RM1510
RM1470
RM1570
RM2014
RM2034
RM2020
RM2000
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 13
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
21
10
- R
M2
15
0M
EZ
ZO
TE
K
MezzoTek - Necked Post Pulls
Straight Pulls without GripZone
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM2110 12" 1 1⁄4" 591 640 348 230 258 335 374
24" 1 1⁄4" 640 691 410 287 321 419 467
36" 1 1⁄4" 688 743 470 344 385 502 561
48" 1 1⁄4" 735 794 533 402 450 586 654
60" 1 1⁄4" 766 827 574 439 492 642 714
72" 1 1⁄4" 798 862 638 477 535 697 776
84" 1 1⁄4" 830 896 680 515 578 753 838
96" 1 1⁄4" 861 930 721 553 620 808 901
RM2120 12" 1 1⁄2" 643 694 360 242 271 354 393
24" 1 1⁄2" 691 746 423 300 336 437 488
36" 1 1⁄2" 738 798 485 356 400 520 581
48" 1 1⁄2" 787 849 546 414 464 603 674
60" 1 1⁄2" 818 883 587 451 506 658 734
72" 1 1⁄2" 849 918 652 489 547 713 796
84" 1 1⁄2" 881 952 693 527 589 769 856
96" 1 1⁄2" 913 986 734 564 633 825 918
Push Bars without GripZoneRM2112 Up to 36" CTC 1 1⁄4" 688 743 470 344 385 502 561
RM2122 Up to 36" CTC 1 1⁄2" 738 798 485 356 400 520 581
Straight Pulls with GripZone
Part Max OA Dia. 3/605 9/611 32/629 32316
RM2130 12" 1 1⁄4" 718 811 372 551
24" 1 1⁄4" 765 864 436 644
36" 1 1⁄4" 812 919 502 738
48" 1 1⁄4" 861 972 564 828
60" 1 1⁄4" 893 1,009 608 887
72" 1 1⁄4" 923 1,044 649 949
84" 1 1⁄4" 955 1,080 692 1,008
96" 1 1⁄4" 987 1,115 734 1,070
RM2140 12" 1 1⁄2" 769 869 385 605
24" 1 1⁄2" 817 923 450 710
36" 1 1⁄2" 864 976 514 814
48" 1 1⁄2" 913 1,030 579 918
60" 1 1⁄2" 942 1,067 620 987
72" 1 1⁄2" 974 1,102 662 1,057
84" 1 1⁄2" 1,007 1,136 705 1,125
96" 1 1⁄2" 1,038 1,172 748 1,196
Push Bars with GripZoneRM2132 Up to 36" CTC 1 1⁄4" 812 919 502 738
RM2142 Up to 36" CTC 1 1⁄2" 864 976 514 814
Double Stepped Post Pulls
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM2150 12" 1" 458 495 372 251 283 368 410
24" 1" 531 575 434 310 347 452 504
36" 1" 604 653 496 367 411 535 598
48" 1" 677 731 558 425 476 619 691
60" 1" 749 810 625 462 518 675 753
72" 1" 823 888 665 502 560 730 814
84" 1" 896 968 706 539 604 787 876
96" 1" 969 1,046 747 577 645 842 938
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Pulls with GripZone offer an additional aesthetic look, not a tactile feel. The grip zones are satin, the post and end
sections are polished. US10B finish is not available on GripZone pulls.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM2132
RM2112
RM2110
RM2130
RM2150
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.14
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
22
00
- R
M2
24
0B
AN
DW
IDT
H
BandWidth - Collar Mount Pulls
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Specify finish of grip and collar.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow
& medium stile doors and 1" from end for flush and wide stile doors.
Straight Pulls - Flat Ends
Part Max OA Dia.3/6054/606
10/61210B/613
Stock PC10BE 32D/630 32/629
RM2200 12" 1" 599 648 536 401 448
24" 1" 696 750 585 446 501
36" 1" 795 858 659 491 550
48" 1" 893 964 708 537 600
60" 1" 990 1,068 741 565 634
72" 1" 1,087 1,174 773 596 667
84" 1" 1,185 1,279 804 626 700
96" 1" 1,284 1,385 837 655 734
RM2210 12" 1 1⁄4" 641 692 551 413 464
24" 1 1⁄4" 736 795 599 458 514
36" 1 1⁄4" 831 898 673 505 564
48" 1 1⁄4" 924 999 721 548 615
60" 1 1⁄4" 1,019 1,102 754 579 647
72" 1 1⁄4" 1,115 1,202 785 609 680
84" 1 1⁄4" 1,209 1,306 818 639 715
96" 1 1⁄4" 1,304 1,409 849 667 748
Offset Pulls - Flat Ends
RM2230 12" 1" 653 705 580 441 493
24" 1" 749 811 654 487 545
36" 1" 848 916 704 533 596
48" 1" 948 1,022 753 577 646
60" 1" 1,043 1,127 784 608 679
72" 1" 1,142 1,233 817 638 714
84" 1" 1,238 1,338 848 666 747
96" 1" 1,337 1,444 882 696 780
RM2240 12" 1 1⁄4" 695 749 593 454 510
24" 1 1⁄4" 789 851 669 501 559
36" 1 1⁄4" 884 956 718 545 611
48" 1 1⁄4" 977 1,056 765 588 659
60" 1 1⁄4" 1,074 1,160 797 619 692
72" 1 1⁄4" 1,167 1,261 831 649 726
84" 1 1⁄4" 1,262 1,363 861 678 759
96" 1 1⁄4" 1,357 1,465 894 709 793
RM2240
RM2210
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 15
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
22
02
- R
M2
24
4B
AN
DW
IDT
H
BandWidth - Collar Mount Pulls (con't)
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Specify finish of grip and collar.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow
& medium stile doors and 1" from end for flush and wide stile doors.
Straight Pulls - Round Ends
Part Max OA Dia.3/6054/606
10/61210B/613
Stock PC10BE 32D/630 32/629
RM2204 12" 1" 712 770 588 448 503
24" 1" 811 876 662 493 553
36" 1" 909 981 710 539 605
48" 1" 1,007 1,087 760 584 654
60" 1" 1,103 1,193 793 615 688
72" 1" 1,201 1,299 823 644 722
84" 1" 1,300 1,403 857 674 755
96" 1" 1,397 1,509 888 703 787
RM2214 12" 1 1⁄4" 756 816 602 461 516
24" 1 1⁄4" 849 918 676 507 568
36" 1 1⁄4" 943 1,019 725 552 619
48" 1 1⁄4" 1,040 1,123 773 596 667
60" 1 1⁄4" 1,134 1,225 804 626 700
72" 1 1⁄4" 1,229 1,326 837 655 734
84" 1 1⁄4" 1,324 1,429 869 686 768
96" 1 1⁄4" 1,418 1,531 902 716 801
Offset Pulls - Round Ends
RM2234 12" 1" 766 828 656 489 547
24" 1" 864 933 706 535 598
36" 1" 962 1,040 755 580 649
48" 1" 1,060 1,145 803 625 699
60" 1" 1,158 1,250 836 654 733
72" 1" 1,255 1,355 868 685 767
84" 1" 1,353 1,462 901 715 800
96" 1" 1,452 1,567 932 745 833
RM2244 12" 1 1⁄4" 809 875 671 503 562
24" 1 1⁄4" 903 975 720 547 613
36" 1 1⁄4" 999 1,079 769 592 664
48" 1 1⁄4" 1,092 1,180 817 638 714
60" 1 1⁄4" 1,187 1,284 848 666 747
72" 1 1⁄4" 1,282 1,384 882 696 780
84" 1 1⁄4" 1,378 1,487 912 726 814
96" 1 1⁄4" 1,471 1,589 945 756 847
Push Bars - Flat Ends
RM2202 Up to 36" CTC 1" 795 858 659 491 550
RM2212 Up to 36" CTC 1 1⁄4" 831 898 673 505 564
Push Bars - Round Ends
RM2206 Up to 36" CTC 1" 909 981 710 539 605
RM2216 Up to 36" CTC 1 1⁄4" 943 1,019 725 552 619
RM2244
RM2214
RM2212
RM2216
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.16
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
OV
ALT
EK
RM
23
00
-RM
23
30
OvalTek - True Oval Grip
• RM2310 pulls add $7.60/in. over 96".
• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM2320
RM2300
Straight Pulls
Part Max OA SizeStock PC
10BE 32D/630 32/629
RM2300 12" 1" x 1 1⁄2" 508 375 421
24" 1" x 1 1⁄2" 573 436 488
36" 1" x 1 1⁄2" 664 497 556
48" 1" x 1 1⁄2" 728 556 623
60" 1" x 1 1⁄2" 794 617 690
72" 1" x 1 1⁄2" 859 677 758
84" 1" x 1 1⁄2" 924 737 826
96" 1" x 1 1⁄2" 988 797 892
Offset Pulls
RM2320 12" 1" x 1 1⁄2" 553 417 467
24" 1" x 1 1⁄2" 644 477 535
36" 1" x 1 1⁄2" 708 538 602
48" 1" x 1 1⁄2" 774 597 670
60" 1" x 1 1⁄2" 838 658 737
72" 1" x 1 1⁄2" 904 719 803
84" 1" x 1 1⁄2" 968 778 872
96" 1" x 1 1⁄2" 1,033 838 939
Straight Pulls
RM2310 12" 1 1⁄8" x 1 7⁄8" 527 394 440
24" 1 1⁄8" x 1 7⁄8" 601 461 517
36" 1 1⁄8" x 1 7⁄8" 700 530 593
48" 1 1⁄8" x 1 7⁄8" 775 599 671
60" 1 1⁄8" x 1 7⁄8" 848 667 748
72" 1 1⁄8" x 1 7⁄8" 922 735 825
84" 1 1⁄8" x 1 7⁄8" 998 804 901
96" 1 1⁄8" x 1 7⁄8" 1,071 873 979
Offset Pulls
RM2330 12" 1 1⁄8" x 1 7⁄8" 571 435 487
24" 1 1⁄8" x 1 7⁄8" 671 504 563
36" 1 1⁄8" x 1 7⁄8" 746 571 641
48" 1 1⁄8" x 1 7⁄8" 819 641 718
60" 1 1⁄8" x 1 7⁄8" 893 709 794
72" 1 1⁄8" x 1 7⁄8" 967 777 871
84" 1 1⁄8" x 1 7⁄8" 1,042 847 948
96" 1 1⁄8" x 1 7⁄8" 1,115 914 1,023
Push Bars
RM2302 Up to 36" CTC 1" x 1 1⁄2" 664 497 556
RM2312 Up to 36" CTC 1 1⁄8" x 1 7⁄8" 700 530 593RM2302
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 17
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
24
00
-RM
24
20
OV
ALT
EK
OvalTek - Flat Oval Grip
Straight Pulls - Small Round Posts
Part Max OA SizeStock PC
10BE 32D/630 32/629
RM2400 12" 3⁄4" x 1 1⁄2" 562 426 477
24" 3⁄4" x 1 1⁄2" 676 508 569
36" 3⁄4" x 1 1⁄2" 764 589 660
48" 3⁄4" x 1 1⁄2" 852 671 752
60" 3⁄4" x 1 1⁄2" 941 752 843
72" 3⁄4" x 1 1⁄2" 1,028 834 934
84" 3⁄4" x 1 1⁄2" 1,116 915 1,025
96" 3⁄4" x 1 1⁄2" 1,230 996 1,117
Straight Pulls - Large Round Posts
RM2410 12" 3⁄4" x 1 1⁄2" 608 467 524
24" 3⁄4" x 1 1⁄2" 721 550 616
36" 3⁄4" x 1 1⁄2" 810 631 707
48" 3⁄4" x 1 1⁄2" 897 713 797
60" 3⁄4" x 1 1⁄2" 985 794 889
72" 3⁄4" x 1 1⁄2" 1,073 876 981
84" 3⁄4" x 1 1⁄2" 1,187 957 1,071
96" 3⁄4" x 1 1⁄2" 1,276 1,039 1,163
Straight Pulls - Oblong Posts
RM2420 12" 3⁄4" x 1 1⁄2" 761 586 657
24" 3⁄4" x 1 1⁄2" 848 667 748
36" 3⁄4" x 1 1⁄2" 936 749 838
48" 3⁄4" x 1 1⁄2" 1,025 831 931
60" 3⁄4" x 1 1⁄2" 1,113 912 1,021
72" 3⁄4" x 1 1⁄2" 1,225 993 1,112
84" 3⁄4" x 1 1⁄2" 1,315 1,075 1,204
96" 3⁄4" x 1 1⁄2" 1,403 1,157 1,295
Push Bar - Large Round Posts
RM2402 Up to 36" CTC 3⁄4" x 1 1⁄2" 810 631 707
• RM2410 pulls add $7.60/in. over 96".
• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM2400
RM2410
RM2420
RM2402
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.18
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
25
10
-RM
26
40
SO
FT
ME
T /
SO
FT
TE
K
SoftMet - Santoprene™ GripStraight Pulls - Flat Ends
PartMax OA Dia.
3/605 4/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM2510 12" 1 1⁄4" 492 531 485 352 396
24" 1 1⁄4" 637 688 605 462 519
36" 1 1⁄4" 781 844 750 574 643
48" 1 1⁄4" 925 1,000 857 685 767
60" 1 1⁄4" 1,071 1,156 977 795 890
72" 1 1⁄4" 1,216 1,312 1,118 905 1,014
84" 1 1⁄4" 1,360 1,468 1,238 1,016 1,139
Offset Pulls - Flat EndsRM2540 12" 1 1⁄4" 541 583 531 396 443
24" 1 1⁄4" 686 739 675 506 565
36" 1 1⁄4" 828 896 796 617 690
48" 1 1⁄4" 973 1,050 903 727 815
60" 1 1⁄4" 1,118 1,206 1,022 837 938
72" 1 1⁄4" 1,262 1,364 1,164 948 1,062
84" 1 1⁄4" 1,407 1,520 1,283 1,059 1,185
Straight Pulls - Round EndsRM2514 12" 1 1⁄4" 602 650 537 401 449
24" 1 1⁄4" 746 806 683 512 573
36" 1 1⁄4" 890 961 801 622 696
48" 1 1⁄4" 1,035 1,118 908 732 821
60" 1 1⁄4" 1,180 1,274 1,027 843 943
72" 1 1⁄4" 1,324 1,430 1,170 954 1,068
84" 1 1⁄4" 1,468 1,587 1,288 1,064 1,191
Offset Pulls - Round EndsRM2544 12" 1 1⁄4" 650 701 582 443 496
24" 1 1⁄4" 794 858 728 554 620
36" 1 1⁄4" 938 1,013 847 664 745
48" 1 1⁄4" 1,083 1,169 953 775 867
60" 1 1⁄4" 1,229 1,326 1,096 885 991
72" 1 1⁄4" 1,373 1,482 1,216 995 1,114
84" 1 1⁄4" 1,517 1,638 1,335 1,105 1,238
Push BarsRM2512 Up to 36" CTC 1 1⁄4" 781 844 750 574 643
RM2516 Up to 36" CTC 1 1⁄4" 890 961 801 622 696
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
SoftTek - Santoprene™ GripStraight Pulls
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM2610 12" 1 1⁄4" 443 479 470 340 380
24" 1 1⁄4" 580 625 586 446 500
36" 1 1⁄4" 717 773 726 551 618
48" 1 1⁄4" 853 921 826 657 735
60" 1 1⁄4" 990 1,068 941 762 855
72" 1 1⁄4" 1,126 1,217 1,078 868 972
84" 1 1⁄4" 1,262 1,363 1,193 974 1,093
Offset PullsRM2640 12" 1 1⁄4" 491 530 517 382 427
24" 1 1⁄4" 626 677 656 488 546
36" 1 1⁄4" 764 825 772 592 664
48" 1 1⁄4" 900 972 872 698 783
60" 1 1⁄4" 1,037 1,120 986 804 901
72" 1 1⁄4" 1,173 1,268 1,125 911 1,020
84" 1 1⁄4" 1,310 1,416 1,239 1,017 1,140
Push BarRM2612 Up to 36" CTC 1 1⁄4" 717 773 726 551 618
RM2510
RM2514
RM2544
RM2512
RM2516
RM2540
RM2610
RM2640
RM2612 *Santoprene™ is a registered trademark of the Exxon Mobil Corporation.
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 19
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
30
10
- R
M3
13
1N
EO
ME
TR
IX /
GR
OO
VE
NeoMetrix - with GripZone
Straight Pulls
Part CTC Dia. 3/605 9/611 32/629 32316
RM3010 12" 1" 409 461 236 385
24" 1" 505 569 287 466
36" 1" 600 677 337 549
RM3020 12" 1 1⁄4" 447 505 249 407
24" 1 1⁄4" 540 610 301 490
36" 1 1⁄4" 633 716 350 570
RM3030 12" 1 1⁄2" 524 591 278 453
24" 1 1⁄2" 612 690 332 541
36" 1 1⁄2" 697 788 387 630
Offset Pulls
Part CTC Dia. 3/605 9/611 32/629 32316
RM3040 12" 1" 456 514 274 444
24" 1" 551 623 324 528
36" 1" 648 731 374 610
RM3050 12" 1 1⁄4" 495 559 288 469
24" 1 1⁄4" 586 663 339 550
36" 1 1⁄4" 681 770 389 631
RM3060 12" 1 1⁄2" 572 647 316 515
24" 1 1⁄2" 658 744 370 601
36" 1 1⁄2" 745 843 425 691
Push Bars - 7" Grip
RM3012 Up to 36" 1" 600 677 337 549
RM3022 Up to 36" 1 1⁄4" 633 716 350 570
RM3032 Up to 36" 1 1⁄2" 697 788 387 630
NOTE: Post location on push bars can be
located 1⁄8" from end for narrow & medium
stile doors and 1" from end for flush and
wide stile doors.
RM3020
RM3050
RM3022
Groove - Straight & Offset Pulls
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM3101 12" 1" 473 510 278 198 221
24" 1" 524 565 365 243 273
36" 1" 573 619 414 288 322
48" 1" 623 673 462 333 373
60" 1" 656 709 495 363 406
72" 1" 690 744 526 392 439
84" 1" 723 780 558 422 473
96" 1" 756 816 589 451 506
Offset Pulls - Flat Ends
RM3131 12" 1" 519 561 322 240 268
24" 1" 569 615 410 285 319
36" 1" 619 669 459 330 369
48" 1" 670 724 506 374 420
60" 1" 703 760 539 404 452
72" 1" 736 795 570 434 485
84" 1" 769 830 602 462 518
96" 1" 802 865 659 492 552
RM3101
RM3131
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.20
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
33
00
- R
M3
31
2M
EG
AT
EK
MegaTek - Straight & Offset PostMount Pulls
Straight Pulls - Flat Ends (87" max overall in aluminum, specify CTC and overall length.)
PartMax OA Dia. 28/628
313/710315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM3300 12" 1" 148 164 392 424 218 145 163 213 238
24" 1" 194 208 439 474 265 190 212 277 310
36" 1" 239 256 487 527 349 233 260 339 379
48" 1" 259 307 534 577 395 276 310 404 452
60" 1" 290 337 565 611 426 306 341 444 499
72" 1" 320 368 595 643 458 334 373 486 545
84" 1" 351 400 625 677 487 361 406 528 592
96" 1" 657 710 518 391 437 570 639
RM3301 12" 1 1⁄4" 169 186 410 443 233 158 179 232 260
24" 1 1⁄4" 216 233 457 494 278 202 226 295 330
36" 1 1⁄4" 261 278 504 545 363 246 275 359 402
48" 1 1⁄4" 307 356 550 595 407 289 321 420 470
60" 1 1⁄4" 337 387 582 629 439 316 354 461 517
72" 1 1⁄4" 368 418 613 661 468 345 387 504 563
84" 1 1⁄4" 400 447 643 695 500 373 418 545 611
96" 1 1⁄4" 674 729 531 403 450 587 656
RM3302 12" 1 1⁄2" 196 265 427 462 247 173 194 251 282
24" 1 1⁄2" 240 312 474 513 294 216 242 316 353
36" 1 1⁄2" 288 357 520 564 377 258 291 378 423
48" 1 1⁄2" 366 404 567 614 421 300 337 439 492
60" 1 1⁄2" 396 435 599 648 452 329 368 479 538
72" 1 1⁄2" 426 464 630 681 483 357 402 522 585
84" 1 1⁄2" 457 495 660 714 513 387 432 563 631
96" 1 1⁄2" 691 748 543 414 465 604 678
Offset Pulls - Flat Ends (Specify CTC and overall length.)
RM3310 12" 1" 183 199 436 471 253 179 200 250 276
24" 1" 228 243 483 522 299 221 248 314 348
36" 1" 274 291 530 572 383 265 297 377 416
48" 1" 292 339 577 622 427 307 342 439 485
60" 1" 323 371 607 656 459 335 374 479 533
72" 1" 353 402 639 689 488 363 407 522 580
84" 1" 384 431 669 723 519 392 438 563 627
96" 1" 700 756 551 421 470 604 673
RM3311 12" 1 1⁄4" 204 221 453 488 267 193 215 269 297
24" 1 1⁄4" 252 268 499 538 351 235 263 332 365
36" 1 1⁄4" 296 315 546 588 397 278 312 395 439
48" 1 1⁄4" 339 389 593 640 441 318 356 455 505
60" 1 1⁄4" 371 420 623 673 470 347 389 497 551
72" 1 1⁄4" 402 450 655 706 503 375 421 538 597
84" 1 1⁄4" 431 480 686 739 533 405 452 580 645
96" 1 1⁄4" 717 773 563 432 483 622 691
RM3312 12" 1 1⁄2" 230 300 470 507 281 204 228 289 319
24" 1 1⁄2" 275 347 516 558 365 248 277 352 391
36" 1 1⁄2" 323 392 563 607 412 292 326 415 460
48" 1 1⁄2" 400 437 610 659 453 330 369 473 526
60" 1 1⁄2" 428 466 640 692 484 358 403 513 572
72" 1 1⁄2" 460 497 672 725 515 388 434 555 618
84" 1 1⁄2" 491 528 703 758 544 415 466 597 666
96" 1 1⁄2" 734 792 576 445 498 641 712
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under
RM3300-RM3302.
RM3301
RM3311
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 21
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
33
20
- R
M3
33
2M
EG
AT
EK
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• HF (Hands-Free) Post - Add $28 each (Available on straight post only.)
Order form available on website under RM3320-RM3322.
MegaTek - Straight & Offset PostMount Pulls (con't)
Straight Pulls - Round Ends (90" max overall in aluminum, specify CTC and overall length.)
PartMax OA Dia. 28/628
313/710315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM3320 12" 1" 186 202 487 527 260 185 207 270 300
24" 1" 233 248 534 577 344 228 255 333 374
36" 1" 278 294 581 626 391 272 306 395 444
48" 1" 299 349 626 678 434 312 349 455 509
60" 1" 329 379 658 711 464 340 383 497 555
72" 1" 360 409 689 744 495 368 413 538 603
84" 1" 390 439 720 778 526 398 446 580 649
96" 1" 750 811 557 426 476 622 695
RM3321 12" 1 1⁄4" 210 226 504 545 275 199 222 290 326
24" 1 1⁄4" 258 272 550 595 358 242 270 353 394
36" 1 1⁄4" 304 319 597 647 405 287 319 416 467
48" 1 1⁄4" 349 397 644 696 446 324 363 473 530
60" 1 1⁄4" 379 427 676 730 478 353 396 515 576
72" 1 1⁄4" 409 459 706 763 508 383 427 555 623
84" 1 1⁄4" 439 490 737 797 539 410 458 599 671
96" 1 1⁄4" 769 830 569 438 492 641 716
RM3322 12" 1 1⁄2" 234 252 520 564 302 224 252 328 366
24" 1 1⁄2" 280 296 567 614 387 268 300 392 439
36" 1 1⁄2" 326 344 614 666 434 312 349 455 509
48" 1 1⁄2" 366 404 661 716 471 348 391 508 570
60" 1 1⁄2" 396 435 693 749 504 376 423 550 616
72" 1 1⁄2" 426 464 723 782 534 406 454 592 662
84" 1 1⁄2" 457 495 754 816 564 434 487 632 710
96" 1 1⁄2" 785 849 621 462 519 675 756
Offset Pulls - Round Ends (Specify CTC and overall length.)
RM3330 12" 1" 220 236 528 569 296 218 244 306 336
24" 1" 266 283 575 620 379 261 293 368 410
36" 1" 313 328 621 670 426 306 341 432 481
48" 1" 331 380 668 722 466 342 385 487 544
60" 1" 361 410 699 755 497 370 415 530 589
72" 1" 391 441 730 788 529 400 448 571 638
84" 1" 422 471 761 822 559 428 478 613 683
96" 1" 792 854 613 456 512 655 729
RM3331 12" 1 1⁄4" 245 260 545 587 347 231 257 326 361
24" 1 1⁄4" 292 306 591 639 393 274 308 390 431
36" 1 1⁄4" 337 353 639 689 440 317 355 453 502
48" 1 1⁄4" 380 428 686 739 480 354 397 506 563
60" 1 1⁄4" 410 460 717 773 509 384 428 549 611
72" 1 1⁄4" 441 491 747 807 540 411 459 589 656
84" 1 1⁄4" 471 521 778 841 571 439 493 631 705
96" 1 1⁄4" 809 873 627 468 524 673 750
RM3332 12" 1 1⁄2" 268 285 562 606 375 257 290 363 404
24" 1 1⁄2" 315 331 608 658 422 301 338 427 474
36" 1 1⁄2" 360 377 656 708 468 345 387 491 546
48" 1 1⁄2" 397 436 703 758 505 377 424 541 603
60" 1 1⁄2" 427 465 734 792 536 407 455 584 649
72" 1 1⁄2" 459 496 764 826 565 435 488 626 695
84" 1 1⁄2" 490 527 795 860 623 464 520 666 742
96" 1 1⁄2" 826 893 652 493 551 709 790
RM3321
RM3331
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.22
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
33
40
- R
M3
34
2M
EG
AT
EK
MegaTek - Straight & Offset PostMount Pulls (con't)
Straight Pulls - Bent Ends (86" max CTC in aluminum, specify CTC.)
Part CTC Dia. 28/628313/710315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM3340 12" 1" 140 154 326 353 205 134 150 195 217
24" 1" 176 196 374 404 252 177 199 258 290
36" 1" 214 235 422 455 298 220 247 321 360
48" 1" 250 274 467 505 382 263 296 384 432
60" 1" 287 316 510 550 402 282 316 412 461
72" 1" 323 355 550 595 421 300 337 439 492
84" 1" 358 394 651 703 461 337 376 491 550
96" 1" 750 811 499 371 416 544 609
RM3341 12" 1 1⁄4" 152 168 392 424 218 145 163 213 238
24" 1 1⁄4" 188 207 439 474 265 190 212 277 310
36" 1 1⁄4" 225 248 487 527 349 233 260 339 379
48" 1 1⁄4" 261 289 534 577 395 276 310 404 452
60" 1 1⁄4" 298 328 576 621 415 295 329 428 479
72" 1 1⁄4" 334 368 618 667 434 312 349 455 509
84" 1 1⁄4" 371 409 726 784 471 348 390 507 567
96" 1 1⁄4" 835 901 511 385 429 561 627
RM3342 12" 1 1⁄2" 170 187 476 514 257 182 203 266 296
24" 1 1⁄2" 206 227 524 566 302 224 252 328 366
36" 1 1⁄2" 242 268 570 616 387 268 300 392 439
48" 1 1⁄2" 280 307 618 667 434 312 349 455 509
60" 1 1⁄2" 317 349 660 712 446 324 363 473 530
72" 1 1⁄2" 353 388 703 760 460 336 375 490 549
84" 1 1⁄2" 389 427 803 865 499 371 416 541 609
96" 1 1⁄2" 901 973 537 408 456 594 666
Push Bars - Flat Ends
RM3102 Up to 36" CTC 1" 239 256 487 527 349 233 260 339 379
RM3112 Up to 36" CTC 1 1⁄4" 261 278 504 545 363 246 275 359 402
RM3122 Up to 36" CTC 1 1⁄2" 288 357 520 564 377 258 291 378 423
Push Bars - Round Ends
RM3106 Up to 36" CTC 1" 278 294 581 626 391 272 306 395 444
RM3116 Up to 36" CTC 1 1⁄4" 304 319 597 647 405 287 319 416 467
RM3126 Up to 36" CTC 1 1⁄2" 326 344 614 666 434 312 349 455 509
Straight Pulls - Flat Ends - Back-to-Back Mounting
Part CTC OA Dia. 32D/630
RM3301BTB1224.32D 12" 24" 1 1⁄4" 424
RM3301BTB2436.32D 24" 36" 1 1⁄4" 512
RM3301BTB3648.32D 36" 48" 1 1⁄4" 598
RM3301BTB4860.32D 48" 60" 1 1⁄4" 653
RM3301BTB6072.32D 60" 72" 1 1⁄4" 710
RM3301BTB7284.32D 72" 84" 1 1⁄4" 767
RM3301BTB8496.32D 84" 96" 1 1⁄4" 826
• Add $6.50/in. over 96".
• Add $6.50/in. over 36" on Push Bars.
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from
end for flush and wide stile doors.
• Mounting included for both 1 3/4" wood or metal doors and 1/2" glass doors.
Quick Ship MegaTek - Straight PostMount Pulls
RM3341
RM3116
RM3301BTB
RM3112
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 23
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
34
00
- R
M3
41
2N
EO
MA
X
NeoMax - Post Mounted GripZone
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
Straight Pulls - Flat EndsPart Max OA Dia. 3/605 9/611 32/629 32316
RM3400 12" 1" 370 417 202 288
24" 1" 465 526 251 359
36" 1" 561 634 302 432
48" 1" 656 742 352 504
60" 1" 753 849 403 577
72" 1" 848 957 453 649
84" 1" 942 1,067 504 720
96" 1" 1,040 1,174 554 793
RM3401 12" 1 1⁄4" 409 462 215 351
24" 1 1⁄4" 500 566 266 432
36" 1 1⁄4" 594 670 316 504
48" 1 1⁄4" 687 775 367 596
60" 1 1⁄4" 780 881 417 677
72" 1 1⁄4" 872 986 467 760
84" 1 1⁄4" 966 1,090 517 842
96" 1 1⁄4" 1,057 1,196 568 922
RM3402 12" 1 1⁄2" 485 547 243 348
24" 1 1⁄2" 572 647 298 424
36" 1 1⁄2" 658 744 352 514
48" 1 1⁄2" 745 844 406 582
60" 1 1⁄2" 834 940 460 660
72" 1 1⁄2" 920 1,040 515 736
84" 1 1⁄2" 1,007 1,137 570 815
96" 1 1⁄2" 1,093 1,236 623 891
Offset Pulls - Flat Ends
RM3410 12" 1" 417 472 239 341
24" 1" 512 580 289 412
36" 1" 607 688 340 485
48" 1" 705 797 390 558
60" 1" 801 903 440 630
72" 1" 897 1,012 490 702
84" 1" 992 1,121 541 774
96" 1" 1,088 1,230 590 845
RM3411 12" 1 1⁄4" 456 516 252 361
24" 1 1⁄4" 548 620 303 434
36" 1 1⁄4" 642 725 353 505
48" 1 1⁄4" 734 830 404 578
60" 1 1⁄4" 827 934 454 650
72" 1 1⁄4" 920 1,040 505 722
84" 1 1⁄4" 1,013 1,145 555 794
96" 1 1⁄4" 1,106 1,250 606 865
RM3412 12" 1 1⁄2" 532 602 282 402
24" 1 1⁄2" 620 700 334 479
36" 1 1⁄2" 707 799 390 558
48" 1 1⁄2" 794 897 444 635
60" 1 1⁄2" 881 995 500 713
72" 1 1⁄2" 968 1,093 552 791
84" 1 1⁄2" 1,055 1,194 608 868
96" 1 1⁄2" 1,143 1,290 661 946
RM3401
RM3411
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.24
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
34
20
- R
M3
43
2N
EO
MA
X
Straight Pulls - Round EndsPart Max OA Dia. 3/605 9/611 32/629 32316
RM3420 12" 1" 473 534 241 346
24" 1" 569 643 291 418
36" 1" 664 750 342 490
48" 1" 761 859 392 562
60" 1" 856 968 443 632
72" 1" 953 1,076 492 704
84" 1" 1,047 1,184 543 777
96" 1" 1,144 1,291 592 849
RM3421 12" 1 1⁄4" 511 579 255 364
24" 1 1⁄4" 604 685 305 437
36" 1 1⁄4" 697 788 355 509
48" 1 1⁄4" 790 893 406 582
60" 1 1⁄4" 883 997 456 653
72" 1 1⁄4" 975 1,103 507 726
84" 1 1⁄4" 1,070 1,208 557 796
96" 1 1⁄4" 1,162 1,312 608 868
RM3422 12" 1 1⁄2" 588 666 284 406
24" 1 1⁄2" 676 764 337 481
36" 1 1⁄2" 763 861 392 562
48" 1 1⁄2" 849 960 446 638
60" 1 1⁄2" 936 1,059 502 716
72" 1 1⁄2" 1,025 1,156 555 794
84" 1 1⁄2" 1,111 1,256 610 873
96" 1 1⁄2" 1,198 1,354 663 949
Offset Pulls - Round Ends
RM3430 12" 1" 522 588 278 400
24" 1" 617 696 329 471
36" 1" 711 806 379 541
48" 1" 808 914 430 615
60" 1" 903 1,020 479 686
72" 1" 1,000 1,130 530 759
84" 1" 1,094 1,238 580 830
96" 1" 1,193 1,346 631 903
RM3431 12" 1 1⁄4" 562 634 293 419
24" 1 1⁄4" 654 739 343 491
36" 1 1⁄4" 747 845 393 563
48" 1 1⁄4" 840 950 444 635
60" 1 1⁄4" 933 1,054 493 706
72" 1 1⁄4" 1,026 1,159 544 778
84" 1 1⁄4" 1,119 1,262 593 851
96" 1 1⁄4" 1,211 1,367 645 922
RM3432 12" 1 1⁄2" 637 720 320 459
24" 1 1⁄2" 724 817 374 535
36" 1 1⁄2" 811 917 430 615
48" 1 1⁄2" 898 1,014 483 691
60" 1 1⁄2" 986 1,113 538 771
72" 1 1⁄2" 1,072 1,211 591 848
84" 1 1⁄2" 1,159 1,310 647 925
96" 1 1⁄2" 1,247 1,409 700 1,003
RM3421
RM3431
NeoMax - Post Mounted GripZone (con't)
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 25
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
NeoMax - Post Mounted GripZone (con't)
Straight Pulls - Bent Ends (Specify CTC.)Part CTC Dia. 3/605 9/611 32/629 32316
RM3440 12" 1" 409 462 236 338
24" 1" 505 569 287 410
36" 1" 600 677 337 481
48" 1" 695 785 387 553
60" 1" 792 894 437 626
72" 1" 887 1,003 488 699
84" 1" 982 1,111 538 771
96" 1" 1,079 1,219 588 843
RM3441 12" 1 1⁄4" 447 506 249 407
24" 1 1⁄4" 540 611 301 490
36" 1 1⁄4" 633 714 350 570
48" 1 1⁄4" 725 819 402 652
60" 1 1⁄4" 818 924 451 735
72" 1 1⁄4" 912 1,029 503 816
84" 1 1⁄4" 1,005 1,134 552 897
96" 1 1⁄4" 1,097 1,239 604 979
RM3442 12" 1 1⁄2" 524 591 278 400
24" 1 1⁄2" 612 690 332 475
36" 1 1⁄2" 697 788 387 553
48" 1 1⁄2" 784 887 441 631
60" 1 1⁄2" 872 986 497 710
72" 1 1⁄2" 959 1,083 550 788
84" 1 1⁄2" 1,046 1,183 606 865
96" 1 1⁄2" 1,132 1,279 659 942
Push Bars - Flat Ends (7" Grip)
Part CTC Dia. 3/605 9/611 32/629 32316
RM3202 Up to 36" 1" 561 634 302 432
RM3212 Up to 36" 1 1⁄4" 594 670 316 504
RM3222 Up to 36" 1 1⁄2" 658 744 352 514
Push Bars - Round Ends (7" Grip)RM3206 Up to 36" 1" 664 750 342 490
RM3216 Up to 36" 1 1⁄4" 697 788 355 509
RM3226 Up to 36" 1 1⁄2" 763 861 392 562
RM3441
RM3212
RM3216
RM
32
02
- R
M3
70
2N
EO
MA
X /
LIN
EA
MA
X
LineaMax - Grooved Pulls
Straight Pulls - Solid Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM3701 12" 1 1⁄4" 793 856 546 412 461
24" 1 1⁄4" 952 1,027 671 504 563
36" 1 1⁄4" 1,110 1,198 769 593 665
48" 1 1⁄4" 1,269 1,368 867 685 767
60" 1 1⁄4" 1,427 1,540 965 776 868
72" 1 1⁄4" 1,585 1,711 1,065 866 971
84" 1 1⁄4" 1,743 1,884 1,188 958 1,073
96" 1 1⁄4" 1,902 2,054 1,286 1,050 1,175
RM3702 12" 1 1⁄2" 955 1,031 594 455 511
24" 1 1⁄2" 1,126 1,217 727 555 622
36" 1 1⁄2" 1,299 1,402 835 654 732
48" 1 1⁄2" 1,469 1,588 942 754 845
60" 1 1⁄2" 1,643 1,773 1,049 853 956
72" 1 1⁄2" 1,814 1,959 1,182 953 1,067
84" 1 1⁄2" 1,984 2,145 1,288 1,052 1,177
96" 1 1⁄2" 2,157 2,329 1,395 1,151 1,289
• Add $8.10/in. over 96".
• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).
RM3701
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.26
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
37
11
- R
M3
73
2LI
NE
AM
AX
LineaMax - Grooved Pulls (con't)
Offset Pulls - Solid Flat Ends
PartMax OA Dia.
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629
RM3711 12" 1 1⁄4" 840 905 592 453 509
24" 1 1⁄4" 997 1,078 716 544 611
36" 1 1⁄4" 1,156 1,248 815 636 713
48" 1 1⁄4" 1,314 1,419 912 726 814
60" 1 1⁄4" 1,472 1,590 1,010 819 915
72" 1 1⁄4" 1,630 1,762 1,109 908 1,017
84" 1 1⁄4" 1,789 1,932 1,233 999 1,120
96" 1 1⁄4" 1,947 2,104 1,331 1,091 1,222
RM3712 12" 1 1⁄2" 1,001 1,081 665 499 557
24" 1 1⁄2" 1,172 1,267 773 596 668
36" 1 1⁄2" 1,345 1,453 879 695 779
48" 1 1⁄2" 1,516 1,637 986 795 890
60" 1 1⁄2" 1,689 1,822 1,094 893 1,001
72" 1 1⁄2" 1,859 2,008 1,225 993 1,112
84" 1 1⁄2" 2,031 2,194 1,334 1,093 1,224
96" 1 1⁄2" 2,204 2,380 1,442 1,193 1,335
Straight Pulls - Fully Grooved Flat Ends
RM3721 12" 1 1⁄4" 569 615 428 303 339
24" 1 1⁄4" 719 776 522 389 435
36" 1 1⁄4" 868 937 641 475 533
48" 1 1⁄4" 1,017 1,098 734 561 628
60" 1 1⁄4" 1,166 1,259 826 647 725
72" 1 1⁄4" 1,315 1,421 920 733 822
84" 1 1⁄4" 1,465 1,582 1,013 821 918
96" 1 1⁄4" 1,614 1,743 1,107 905 1,015
RM3722 12" 1 1⁄2" 620 670 475 345 386
24" 1 1⁄2" 776 840 574 437 489
36" 1 1⁄2" 933 1,007 699 529 592
48" 1 1⁄2" 1,088 1,176 798 621 695
60" 1 1⁄2" 1,243 1,344 898 714 799
72" 1 1⁄2" 1,400 1,512 999 805 902
84" 1 1⁄2" 1,555 1,681 1,097 898 1,005
96" 1 1⁄2" 1,711 1,849 1,222 990 1,108
Offset Pulls - Fully Grooved Flat Ends
RM3731 12" 1 1⁄4" 616 664 474 344 385
24" 1 1⁄4" 765 826 567 430 481
36" 1 1⁄4" 915 988 685 516 578
48" 1 1⁄4" 1,064 1,148 778 604 675
60" 1 1⁄4" 1,213 1,309 872 689 771
72" 1 1⁄4" 1,362 1,471 964 775 867
84" 1 1⁄4" 1,512 1,631 1,057 861 964
96" 1 1⁄4" 1,661 1,792 1,176 948 1,062
RM3732 12" 1 1⁄2" 667 720 519 386 433
24" 1 1⁄2" 823 888 645 478 536
36" 1 1⁄2" 978 1,056 744 570 640
48" 1 1⁄2" 1,134 1,225 843 662 743
60" 1 1⁄2" 1,290 1,393 943 755 846
72" 1 1⁄2" 1,447 1,562 1,043 848 949
84" 1 1⁄2" 1,603 1,730 1,142 939 1,052
96" 1 1⁄2" 1,759 1,898 1,266 1,032 1,156
• Add $8.10/in. over 96".
• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).
RM3711
RM3721
RM3731
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 27
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
37
51
- R
M3
77
2LI
NE
AM
AX
LineaMax - Grooved Pulls (con't)
Straight Pulls - Solid Round Ends
PartMax OA Dia.
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629
RM3751 12" 1 1⁄4" 898 970 611 472 528
24" 1 1⁄4" 1,056 1,142 735 562 630
36" 1 1⁄4" 1,216 1,312 834 653 731
48" 1 1⁄4" 1,374 1,483 931 745 833
60" 1 1⁄4" 1,533 1,655 1,030 835 936
72" 1 1⁄4" 1,691 1,826 1,128 927 1,038
84" 1 1⁄4" 1,850 1,998 1,253 1,017 1,140
96" 1 1⁄4" 2,008 2,168 1,350 1,107 1,240
RM3752 12" 1 1⁄2" 1,060 1,146 684 515 577
24" 1 1⁄2" 1,233 1,331 792 615 688
36" 1 1⁄2" 1,403 1,516 898 714 799
48" 1 1⁄2" 1,575 1,701 1,005 813 909
60" 1 1⁄2" 1,747 1,888 1,113 912 1,021
72" 1 1⁄2" 1,919 2,073 1,245 1,011 1,132
84" 1 1⁄2" 2,091 2,259 1,352 1,109 1,242
96" 1 1⁄2" 2,263 2,442 1,460 1,209 1,355
Offset Pulls - Solid Round Ends
RM3761 12" 1 1⁄4" 943 1,019 681 513 574
24" 1 1⁄4" 1,103 1,191 779 605 676
36" 1 1⁄4" 1,261 1,362 878 694 778
48" 1 1⁄4" 1,420 1,534 977 785 880
60" 1 1⁄4" 1,578 1,704 1,074 877 982
72" 1 1⁄4" 1,737 1,876 1,198 967 1,083
84" 1 1⁄4" 1,895 2,047 1,296 1,059 1,186
96" 1 1⁄4" 2,054 2,220 1,394 1,149 1,288
RM3762 12" 1 1⁄2" 1,107 1,196 728 556 623
24" 1 1⁄2" 1,278 1,381 836 655 734
36" 1 1⁄2" 1,450 1,567 943 755 846
48" 1 1⁄2" 1,622 1,752 1,051 854 957
60" 1 1⁄2" 1,795 1,937 1,183 954 1,068
72" 1 1⁄2" 1,965 2,122 1,290 1,053 1,179
84" 1 1⁄2" 2,137 2,308 1,398 1,153 1,290
96" 1 1⁄2" 2,309 2,493 1,504 1,251 1,401
Straight Pulls - Fully Grooved Round Ends
RM3771 12" 1 1⁄4" 674 729 492 361 405
24" 1 1⁄4" 824 890 586 448 502
36" 1 1⁄4" 973 1,050 705 534 598
48" 1 1⁄4" 1,123 1,213 797 620 694
60" 1 1⁄4" 1,272 1,374 890 707 791
72" 1 1⁄4" 1,421 1,535 984 793 888
84" 1 1⁄4" 1,571 1,696 1,076 879 985
96" 1 1⁄4" 1,720 1,857 1,195 965 1,080
RM3772 12" 1 1⁄2" 727 784 539 404 452
24" 1 1⁄2" 882 953 664 497 556
36" 1 1⁄2" 1,038 1,121 763 588 659
48" 1 1⁄2" 1,195 1,289 863 680 761
60" 1 1⁄2" 1,349 1,459 962 773 865
72" 1 1⁄2" 1,505 1,626 1,061 864 968
84" 1 1⁄2" 1,662 1,796 1,187 957 1,071
96" 1 1⁄2" 1,817 1,963 1,286 1,050 1,175
• Add $8.10/in. over 96".
• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).
RM3751
RM3761
RM3771
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.28
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
LIN
EA
MA
X
LineaMax - Grooved Pulls (con't)
Offset Pulls - Fully Grooved Round Ends
PartMax OA Dia.
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629
RM3781 12" 1 1⁄4" 722 779 538 403 451
24" 1 1⁄4" 871 939 655 489 547
36" 1 1⁄4" 1,019 1,102 749 575 645
48" 1 1⁄4" 1,168 1,262 842 661 742
60" 1 1⁄4" 1,318 1,424 935 748 837
72" 1 1⁄4" 1,467 1,585 1,028 834 934
84" 1 1⁄4" 1,617 1,746 1,121 921 1,032
96" 1 1⁄4" 1,766 1,907 1,240 1,006 1,127
RM3782 12" 1 1⁄2" 773 835 583 446 500
24" 1 1⁄2" 929 1,003 708 538 602
36" 1 1⁄2" 1,084 1,171 809 630 706
48" 1 1⁄2" 1,240 1,340 907 722 808
60" 1 1⁄2" 1,396 1,508 1,006 814 912
72" 1 1⁄2" 1,552 1,675 1,107 905 1,015
84" 1 1⁄2" 1,708 1,845 1,232 998 1,118
96" 1 1⁄2" 1,862 2,012 1,331 1,091 1,222
Straight Pulls - Fully Grooved Bent Ends
RM3741 12" 1 1⁄4" 338 379
24" 1 1⁄4" 424 475
36" 1 1⁄4" 511 571
48" 1 1⁄4" 596 668
60" 1 1⁄4" 682 765
72" 1 1⁄4" 769 861
84" 1 1⁄4" 855 958
96" 1 1⁄4" 941 1,055
RM3742 12" 1 1⁄2" 381 426
24" 1 1⁄2" 473 529
36" 1 1⁄2" 564 633
48" 1 1⁄2" 657 735
60" 1 1⁄2" 749 838
72" 1 1⁄2" 840 942
84" 1 1⁄2" 934 1,045
96" 1 1⁄2" 1,025 1,148
Push Bars Solid Grooves Flat Ends
RM3512 Up to 36" CTC 1 1⁄4" 1,110 1,198 769 593 665
RM3522 Up to 36" CTC 1 1⁄2" 1,299 1,402 835 654 732
Push Bars Solid Grooves Round Ends
RM3516 Up to 36" CTC 1 1⁄4" 1,216 1,312 834 653 731
RM3526 Up to 36" CTC 1 1⁄2" 1,403 1,516 898 714 799
Push Bars Fully Grooved - Flat Ends
RM3612 Up to 36" CTC 1 1⁄4" 868 937 641 475 533
RM3622 Up to 36" CTC 1 1⁄2" 933 1,007 699 529 592
Push Bars Fully Grooved - Round Ends
RM3616 Up to 36" CTC 1 1⁄4" 973 1,050 705 534 598
RM3626 Up to 36" CTC 1 1⁄2" 1,038 1,121 763 588 659
• Add $8.10/in. over 96".
• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).
RM3781
RM3741
RM3512
RM3516
RM3612
RM3616
RM
35
12
- R
M3
78
2
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 29
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
38
00
- R
M3
85
0N
OIR
ME
T
NoirMet - Black Anodized Grip with Contrasting Ends and Posts
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM3800 12" 1" 396 458 395 279 308 408 448
24" 1" 432 492 423 307 338 447 491
36" 1" 447 507 440 323 355 470 516
48" 1" 666 727 543 422 466 615 677
60" 1" 724 773 568 447 491 650 716
72" 1" 779 819 591 470 516 683 753
84" 1" 890 940 650 500 550 729 800
96" 1" 1,001 1,062 681 530 583 772 849
RM3810 12" 1 1⁄4" 418 476 403 288 315 420 461
24" 1 1⁄4" 476 514 440 323 355 470 516
36" 1 1⁄4" 495 535 457 339 372 492 542
48" 1 1⁄4" 667 727 562 441 484 641 705
60" 1 1⁄4" 704 755 580 457 504 667 734
72" 1 1⁄4" 741 781 599 476 523 692 760
84" 1 1⁄4" 881 920 684 533 587 775 854
96" 1 1⁄4" 1,022 1,057 742 589 648 858 941
RM3820 12" 1 1⁄2" 517 555 457 339 372 492 542
24" 1 1⁄2" 576 614 485 367 403 534 587
36" 1 1⁄2" 624 664 524 405 445 589 648
48" 1 1⁄2" 710 729 600 477 524 693 762
60" 1 1⁄2" 775 797 662 512 563 744 819
72" 1 1⁄2" 841 862 697 546 600 794 873
84" 1 1⁄2" 962 985 756 603 663 878 965
96" 1 1⁄2" 1,084 1,105 817 660 726 960 1,057
Offset Pulls - Flat EndsRM3830 12" 1" 447 555 440 323 355 470 516
24" 1" 530 630 490 372 411 542 596
36" 1" 625 711 543 422 466 615 677
48" 1" 720 795 594 473 521 688 758
60" 1" 778 842 621 496 547 722 795
72" 1" 834 887 670 520 571 756 832
84" 1" 947 1,009 716 563 620 819 901
96" 1" 1,055 1,129 760 605 666 881 968
RM3840 12" 1 1⁄4" 466 576 447 331 364 480 528
24" 1 1⁄4" 561 644 499 380 418 553 607
36" 1 1⁄4" 641 720 551 430 472 625 686
48" 1 1⁄4" 722 795 601 478 525 695 763
60" 1 1⁄4" 759 823 620 495 546 721 794
72" 1 1⁄4" 795 849 663 513 564 746 820
84" 1 1⁄4" 935 989 722 570 628 831 915
96" 1 1⁄4" 1,076 1,126 781 626 689 912 1,003
RM3850 12" 1 1⁄2" 565 655 501 382 421 557 614
24" 1 1⁄2" 624 711 524 405 445 589 648
36" 1 1⁄2" 695 756 582 459 508 669 739
48" 1 1⁄2" 765 798 664 514 565 748 823
60" 1 1⁄2" 831 864 701 549 604 799 879
72" 1 1⁄2" 895 931 737 583 642 849 935
84" 1 1⁄2" 1,017 1,050 796 641 705 933 1,025
96" 1 1⁄2" 1,140 1,172 856 698 767 1,015 1,117
RM3810
RM3840
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.30
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
38
02
- R
M3
85
4
NO
IRM
ET
NoirMet - Black Anodized Grip with Contrasting Ends and Posts (con't)
Straight Pulls - Round Ends
PartMax OA Dia.
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629 32D316 32316
RM3804 12" 1" 447 507 440 323 355 470 516 24" 1" 481 542 470 352 387 514 565 36" 1" 495 555 485 367 403 534 587 48" 1" 717 775 594 473 521 688 758 60" 1" 772 823 621 496 547 722 795 72" 1" 826 866 671 521 572 758 833 84" 1" 937 988 717 564 621 820 902 96" 1" 1,046 1,107 761 607 668 883 972
RM3814 12" 1 1⁄4" 466 527 447 331 364 480 528 24" 1 1⁄4" 528 566 484 366 402 531 585 36" 1 1⁄4" 547 584 501 382 421 557 614 48" 1 1⁄4" 718 778 604 480 527 699 770 60" 1 1⁄4" 755 803 623 497 548 723 797 72" 1 1⁄4" 789 828 667 515 567 752 824 84" 1 1⁄4" 929 969 726 572 631 833 917 96" 1 1⁄4" 1,068 1,108 784 630 691 916 1,006
RM3824 12" 1 1⁄2" 565 605 501 382 421 557 614 24" 1 1⁄2" 624 664 524 405 445 589 648 36" 1 1⁄2" 672 711 570 449 493 654 720 48" 1 1⁄2" 759 780 667 515 567 752 824 60" 1 1⁄2" 824 846 702 550 605 800 881 72" 1 1⁄2" 888 911 738 584 643 850 936 84" 1 1⁄2" 1,009 1,030 795 639 703 930 1,024 96" 1 1⁄2" 1,129 1,149 852 694 764 1,011 1,112
Offset Pulls - Round EndsRM3834 12" 1" 495 535 485 367 403 534 587
24" 1" 581 626 536 415 456 605 666 36" 1" 676 731 586 462 510 673 741 48" 1" 771 832 660 511 561 742 818 60" 1" 826 893 685 534 588 778 856 72" 1" 881 952 709 558 614 812 894 84" 1" 992 1,071 755 602 661 876 964 96" 1" 1,101 1,188 799 644 722 938 1,049
RM3844 12" 1 1⁄4" 517 558 490 372 418 542 607 24" 1 1⁄4" 611 658 542 421 472 614 686 36" 1 1⁄4" 691 747 592 471 526 685 766 48" 1 1⁄4" 772 834 669 519 580 754 844 60" 1 1⁄4" 809 873 686 535 599 779 872 72" 1 1⁄4" 844 913 705 553 620 805 901 84" 1 1⁄4" 985 1,063 764 611 684 888 996 96" 1 1⁄4" 1,123 1,213 822 667 747 971 1,087
RM3854 12" 1 1⁄2" 614 663 544 423 476 617 692 24" 1 1⁄2" 672 726 570 449 503 654 732 36" 1 1⁄2" 743 803 651 502 561 730 818 48" 1 1⁄2" 812 879 705 553 620 805 901 60" 1 1⁄2" 879 950 741 588 658 856 958 72" 1 1⁄2" 942 1,018 776 622 697 904 1,014 84" 1 1⁄2" 1,064 1,148 835 678 759 987 1,105 96" 1 1⁄2" 1,184 1,277 893 734 822 1,067 1,196
Push Bars - Flat EndsRM3802 Up to 36" CTC 1" 447 507 440 323 355 470 516 RM3812 Up to 36" CTC 1 1⁄4" 495 535 457 339 372 492 542 RM3822 Up to 36" CTC 1 1⁄2" 624 664 524 405 445 589 648
Push Bars - Round EndsRM3806 Up to 36" CTC 1" 495 555 485 367 403 534 587 RM3816 Up to 36" CTC 1 1⁄4" 547 584 501 382 421 557 614 RM3826 Up to 36" CTC 1 1⁄2" 672 711 570 449 493 654 720
• Add $6.50/in. over 36" for push bars.
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM3814
RM3844
RM3812
RM3816
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 31
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
39
00
- R
M3
95
0N
OIR
TE
K
NoirTek - Black Anodized Grip with Contrasting Posts
• Add $6.50/in. over 96".
• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under
RM3900-RM3920.
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end
for flush and wide stile doors.
Straight Pulls - Flat Ends
PartMax OA Dia. 28/628
313/710 315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629
RM3900 12" 1" 196 216 261 281 258 186 210
24" 1" 277 304 297 319 286 213 238
36" 1" 359 394 312 336 302 230 256
48" 1" 441 485 529 572 446 330 369
60" 1" 523 575 586 633 470 352 396
72" 1" 605 664 642 693 495 376 420
84" 1" 685 753 755 815 527 407 455
RM3910 12" 1 1⁄4" 215 236 281 303 266 194 217
24" 1 1⁄4" 301 332 341 369 302 230 256
36" 1 1⁄4" 389 427 358 388 320 246 274
48" 1 1⁄4" 476 514 530 573 464 346 387
60" 1 1⁄4" 562 592 567 613 483 365 408
72" 1 1⁄4" 649 672 604 653 500 381 426
84" 1 1⁄4" 737 748 744 805 560 439 491
RM3920 12" 1 1⁄2" 255 280 381 411 320 246 274
24" 1 1⁄2" 325 358 438 474 387 273 306
36" 1 1⁄2" 396 436 489 528 427 311 348
48" 1 1⁄2" 468 524 575 620 501 382 428
60" 1 1⁄2" 539 618 640 691 539 418 468
72" 1 1⁄2" 610 714 704 761 574 452 507
84" 1 1⁄2" 680 810 826 893 659 510 570
Offset Pulls - Flat Ends
RM3930 12" 1" 307 334 303 231 258
24" 1" 343 372 371 256 287
36" 1" 358 388 387 273 306
48" 1" 577 622 490 372 417
60" 1" 634 686 517 398 444
72" 1" 690 745 540 419 470
84" 1" 802 865 571 450 505
RM3940 12" 1 1⁄4" 330 355 312 237 267
24" 1 1⁄4" 389 420 387 273 306
36" 1 1⁄4" 407 438 404 289 324
48" 1 1⁄4" 579 624 509 389 438
60" 1 1⁄4" 615 664 529 408 456
72" 1 1⁄4" 652 704 545 424 477
84" 1 1⁄4" 793 855 606 483 541
RM3950 12" 1 1⁄2" 428 463 404 289 324
24" 1 1⁄2" 488 526 433 315 353
36" 1 1⁄2" 536 579 474 355 399
48" 1 1⁄2" 621 671 546 425 478
60" 1 1⁄2" 688 742 583 460 517
72" 1 1⁄2" 750 811 620 495 554
84" 1 1⁄2" 875 943 705 553 620
RM3910
RM3940
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.32
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
39
02
- R
M3
95
4N
OIR
TE
K
NoirTek - Black Anodized Grip with Contrasting Posts (con't)
• Add $6.50/in. over 36" for push bars.
• Add $6.50/in. over 96".
• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under
RM3904-RM3924.
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
Straight Pulls - Round Ends
PartMax OA Dia. 28/628
313/710 315/711
3/6054/606
10/612 10B/613
Stock PC 10BE 32D/630 32/629
RM3904 12" 1" 242 267 370 399 311 236 265
24" 1" 321 353 406 437 377 263 295
36" 1" 397 438 420 454 394 278 312
48" 1" 476 524 638 690 498 379 424
60" 1" 554 609 695 750 522 403 451
72" 1" 630 693 750 811 545 424 477
84" 1" 709 779 863 933 579 456 512
RM3914 12" 1 1⁄4" 261 288 390 422 319 244 273
24" 1 1⁄4" 337 371 451 487 394 278 312
36" 1 1⁄4" 414 455 467 505 412 296 331
48" 1 1⁄4" 491 540 640 691 517 398 444
60" 1 1⁄4" 566 623 676 730 534 414 462
72" 1 1⁄4" 644 708 712 771 553 433 484
84" 1 1⁄4" 719 792 854 922 612 489 548
RM3924 12" 1 1⁄2" 301 332 490 529 412 296 331
24" 1 1⁄2" 385 423 548 593 440 323 362
36" 1 1⁄2" 468 514 597 644 480 362 405
48" 1 1⁄2" 552 607 683 738 554 434 485
60" 1 1⁄2" 632 697 748 809 590 468 524
72" 1 1⁄2" 716 788 812 878 651 502 562
84" 1 1⁄2" 800 880 935 1,010 710 559 626
Offset Pulls - Round EndsRM3934 12" 1" 418 451 395 279 313
24" 1" 453 489 423 307 343
36" 1" 467 505 440 323 362
48" 1" 687 741 543 422 474
60" 1" 743 803 568 447 500
72" 1" 799 863 591 470 525
84" 1" 912 985 650 500 560
RM3944 12" 1 1⁄4" 437 472 403 288 323
24" 1 1⁄4" 498 537 440 323 362
36" 1 1⁄4" 514 557 457 339 380
48" 1 1⁄4" 688 742 562 441 493
60" 1 1⁄4" 725 782 580 457 513
72" 1 1⁄4" 762 822 599 476 531
84" 1 1⁄4" 901 973 684 533 597
RM3954 12" 1 1⁄2" 537 580 457 339 380
24" 1 1⁄2" 596 643 485 367 411
36" 1 1⁄2" 644 696 524 405 454
48" 1 1⁄2" 731 789 600 477 534
60" 1 1⁄2" 797 860 662 512 574
72" 1 1⁄2" 861 930 697 546 611
84" 1 1⁄2" 985 1,063 756 603 676
Push Bars - Flat EndsRM3902 Up to 36" CTC 1" 359 394 312 336 302 230 256
RM3912 Up to 36" CTC 1 1⁄4" 389 427 358 388 320 246 274
RM3922 Up to 36" CTC 1 1⁄2" 396 436 489 528 427 311 348
Push Bars - Round EndsRM3906 Up to 36" CTC 1" 397 438 420 454 394 278 312
RM3916 Up to 36" CTC 1 1⁄4" 414 455 467 505 412 296 331
RM3926 Up to 36" CTC 1 1⁄2" 468 514 597 644 480 362 405
RM3914
RM3944
RM3912
RM3916
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 33
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
40
00
- R
M4
05
0A
RB
OR
ME
T
ArborMet - Wood Grip Pulls
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4000 12" 1" 512 553 504 372 417
24" 1" 579 624 568 432 482
36" 1" 644 695 656 490 548
48" 1" 710 767 721 550 616
RM4010 12" 1 1⁄4" 535 578 519 386 433
24" 1 1⁄4" 601 650 583 446 500
36" 1 1⁄4" 667 720 672 505 564
48" 1 1⁄4" 732 792 737 563 631
RM4020 12" 1 1⁄2" 623 673 581 443 497
24" 1 1⁄2" 690 744 670 503 562
36" 1 1⁄2" 756 816 734 561 628
48" 1 1⁄2" 822 887 797 620 694
Offset Pulls - Flat Ends
RM4030 12" 1" 559 603 548 413 462
24" 1" 624 674 637 473 529
36" 1" 691 746 701 531 595
48" 1" 757 817 765 590 661
RM4040 12" 1 1⁄4" 581 626 564 427 479
24" 1 1⁄4" 648 699 653 487 545
36" 1 1⁄4" 712 771 718 545 612
48" 1 1⁄4" 779 842 780 606 677
RM4050 12" 1 1⁄2" 670 724 651 484 542
24" 1 1⁄2" 736 795 715 543 609
36" 1 1⁄2" 802 865 778 604 675
48" 1 1⁄2" 868 937 842 661 742
Straight Pulls - Round Ends
RM4004 12" 1" 618 668 555 420 470
24" 1" 685 738 645 478 536
36" 1" 749 810 708 538 602
48" 1" 816 882 773 596 668
RM4014 12" 1 1⁄4" 641 692 570 434 485
24" 1 1⁄4" 707 763 659 492 552
36" 1 1⁄4" 773 835 723 552 618
48" 1 1⁄4" 840 905 788 611 684
RM4024 12" 1 1⁄2" 729 787 656 490 548
24" 1 1⁄2" 795 859 721 550 616
36" 1 1⁄2" 861 931 784 609 681
48" 1 1⁄2" 928 1001 848 667 748
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end
for flush and wide stile doors.
RM4010
RM4040
RM4014
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.34
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
40
02
- R
M4
05
4A
RB
OR
ME
T
ArborMet - Wood Grip Pulls (con't)
Offset Pulls - Round Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4034 12" 1" 664 718 600 460 516
24" 1" 730 789 690 519 582
36" 1" 797 860 753 579 648
48" 1" 862 932 817 639 715
RM4044 12" 1 1⁄4" 687 742 641 475 533
24" 1 1⁄4" 754 813 705 534 598
36" 1 1⁄4" 819 884 768 592 664
48" 1 1⁄4" 885 956 833 652 730
RM4054 12" 1 1⁄2" 775 838 701 531 595
24" 1 1⁄2" 842 909 765 590 661
36" 1 1⁄2" 907 979 831 649 728
48" 1 1⁄2" 973 1050 893 709 794
Push Bars - Flat Ends
RM4002 Up to 36" CTC 1" 644 695 656 490 548
RM4012 Up to 36" CTC 1 1⁄4" 667 720 672 505 564
RM4022 Up to 36" CTC 1 1⁄2" 756 816 734 561 628
Push Bars - Round Ends
RM4006 Up to 36" CTC 1" 749 810 708 538 602
RM4016 Up to 36" CTC 1 1⁄4" 773 835 723 552 618
RM4026 Up to 36" CTC 1 1⁄2" 861 931 784 609 681
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM4044
RM4012
RM4016
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 35
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
40
00
MP
- R
M4
05
4M
PA
RB
OR
ME
T
ArborMet - Wood Grip Pulls (con't)
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4000MP 60" 1" 826 893 838 658 737
72" 1" 893 964 903 718 803
84" 1" 958 1,035 966 777 869
96" 1" 1,025 1,107 1,031 836 937
RM4010MP 60" 1 1⁄4" 848 917 854 672 752
72" 1 1⁄4" 915 989 917 731 820
84" 1 1⁄4" 979 1,059 982 791 885
96" 1 1⁄4" 1,046 1,130 1,046 851 953
RM4020MP 60" 1 1⁄2" 937 1,012 914 728 816
72" 1 1⁄2" 1,004 1,083 979 787 883
84" 1 1⁄2" 1,070 1,155 1,043 848 949
96" 1 1⁄2" 1,135 1,225 1,107 906 1,016
Offset Pulls - Flat EndsRM4030MP 60" 1" 873 941 883 698 782
72" 1" 938 1,013 947 758 850
84" 1" 1,005 1,084 1,010 819 916
96" 1" 1,071 1,156 1,075 878 983
RM4040MP 60" 1 1⁄4" 895 967 897 714 798
72" 1 1⁄4" 960 1,038 962 773 865
84" 1 1⁄4" 1,027 1,109 1,026 832 932
96" 1 1⁄4" 1,092 1,181 1,091 891 998
RM4050MP 60" 1 1⁄2" 985 1,063 960 769 862
72" 1 1⁄2" 1,049 1,132 1,024 829 929
84" 1 1⁄2" 1,116 1,204 1,089 888 995
96" 1 1⁄2" 1,182 1,275 1,152 948 1,063
Straight Pulls - Round EndsRM4004MP 60" 1" 932 1,007 889 705 789
72" 1" 997 1,078 953 764 856
84" 1" 1,064 1,149 1,019 824 923
96" 1" 1,129 1,220 1,082 883 989
RM4014MP 60" 1 1⁄4" 955 1,031 905 719 804
72" 1 1⁄4" 1,020 1,102 968 778 872
84" 1 1⁄4" 1,087 1,173 1,033 837 938
96" 1 1⁄4" 1,153 1,243 1,097 896 1,005
RM4024MP 60" 1 1⁄2" 1,043 1,126 965 776 868
72" 1 1⁄2" 1,109 1,198 1,030 835 935
84" 1 1⁄2" 1,174 1,269 1,094 894 1,001
96" 1 1⁄2" 1,240 1,341 1,158 955 1,069
Offset Pulls - Round EndsRM4034MP 60" 1" 977 1,056 933 747 835
72" 1" 1,044 1,127 999 805 902
84" 1" 1,110 1,199 1,062 914 1,023
96" 1" 1,176 1,271 1,127 1,022 1,145
RM4044MP 60" 1 1⁄4" 1,001 1,081 949 760 851
72" 1 1⁄4" 1,067 1,152 1,013 821 918
84" 1 1⁄4" 1,132 1,223 1,077 880 985
96" 1 1⁄4" 1,199 1,294 1,142 939 1,052
RM4054MP 60" 1 1⁄2" 1,089 1,176 1,009 818 915
72" 1 1⁄2" 1,155 1,248 1,074 877 982
84" 1 1⁄2" 1,221 1,319 1,138 936 1,049
96" 1 1⁄2" 1,287 1,390 1,202 995 1,114
RM4010MP
RM4040MP
RM4044MP
RM4014MP
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end
for flush and wide stile doors.
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.36
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
41
00
- R
M4
15
0A
RB
OR
TEK
ArborTek - Wood Grip Pulls
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4100 12" 1" 381 411 376 253 285
24" 1" 447 483 441 313 350
36" 1" 512 553 504 372 417
48" 1" 579 624 568 432 482
RM4110 12" 1 1⁄4" 402 435 403 279 313
24" 1 1⁄4" 469 507 467 338 379
36" 1 1⁄4" 535 578 531 398 445
48" 1 1⁄4" 601 650 594 455 511
RM4120 12" 1 1⁄2" 492 531 453 324 364
24" 1 1⁄2" 558 602 517 384 430
36" 1 1⁄2" 623 673 581 443 497
48" 1 1⁄2" 690 744 670 503 562
Offset Pulls - Flat Ends
RM4130 12" 1" 427 461 421 296 331
24" 1" 493 532 485 354 398
36" 1" 559 603 548 413 462
48" 1" 624 674 637 473 529
RM4140 12" 1 1⁄4" 449 485 447 320 357
24" 1 1⁄4" 514 557 512 379 425
36" 1 1⁄4" 581 626 575 438 491
48" 1 1⁄4" 648 699 665 499 557
RM4150 12" 1 1⁄2" 537 581 498 366 410
24" 1 1⁄2" 604 652 561 425 476
36" 1 1⁄2" 670 724 651 484 542
48" 1 1⁄2" 736 795 715 543 609
Straight Pulls - Round Ends
RM4104 12" 1" 487 526 427 301 338
24" 1" 551 596 490 359 404
36" 1" 618 668 555 420 470
48" 1" 685 738 645 478 536
RM4114 12" 1 1⁄4" 508 549 454 325 365
24" 1 1⁄4" 575 620 518 385 432
36" 1 1⁄4" 641 692 582 445 499
48" 1 1⁄4" 707 763 671 504 563
RM4124 12" 1 1⁄2" 597 644 504 372 417
24" 1 1⁄2" 663 717 568 432 482
36" 1 1⁄2" 729 787 656 490 548
48" 1 1⁄2" 795 859 721 550 616
RM4110
RM4140
RM4114
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 37
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
ArborTek - Wood Grip Pulls (con't)
Offset Pulls - Round Ends
Part OA Dia.3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4134 12" 1" 532 576 471 343 384
24" 1" 599 647 537 402 450
36" 1" 664 718 600 460 516
48" 1" 730 789 690 519 582
RM4144 12" 1 1⁄4" 554 600 499 368 411
24" 1 1⁄4" 620 670 562 426 477
36" 1 1⁄4" 687 742 652 485 544
48" 1 1⁄4" 754 813 716 544 611
RM4154 12" 1 1⁄2" 643 694 548 413 462
24" 1 1⁄2" 709 766 637 473 529
36" 1 1⁄2" 775 838 701 531 595
48" 1 1⁄2" 842 909 765 590 661
Push Bars - Flat Ends
RM4112 Up to 36" CTC 1 1⁄4" 535 578 531 398 445
RM4122 Up to 36" CTC 1 1⁄2" 623 673 581 443 497
Push Bars - Round Ends
RM4116 Up to 36" CTC 1 1⁄4" 641 692 582 445 499
RM4126 Up to 36" CTC 1 1⁄2" 729 787 656 490 548
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4100MP 60" 1" 694 749 685 540 605
72" 1" 761 820 749 599 671
84" 1" 826 893 814 659 739
96" 1" 893 964 878 719 803
RM4110MP 60" 1 1⁄4" 717 774 711 563 632
72" 1 1⁄4" 782 845 776 623 698
84" 1 1⁄4" 848 917 840 682 765
96" 1 1⁄4" 915 988 905 743 832
RM4120MP 60" 1 1⁄2" 806 869 786 611 684
72" 1 1⁄2" 872 940 851 670 750
84" 1 1⁄2" 937 1,012 915 729 818
96" 1 1⁄2" 1,004 1,083 980 788 883
RM
41
00
MP
- R
M4
15
4A
RB
OR
TEK
RM4144
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end
for flush and wide stile doors.
RM4110MP
RM4112
RM4116
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.38
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
AR
BO
RT
EKR
M4
10
4M
P -
RM
41
54
MP
ArborTek - Wood Grip Pulls (con't)
Offset Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4130MP 60" 1" 741 800 755 581 650
72" 1" 807 872 819 641 718
84" 1" 873 941 884 699 783
96" 1" 938 1,013 948 759 851
RM4140MP 60" 1 1⁄4" 763 1,055 781 607 678
72" 1 1⁄4" 828 896 846 665 745
84" 1 1⁄4" 895 967 910 725 812
96" 1 1⁄4" 960 1,038 975 784 879
RM4150MP 60" 1 1⁄2" 851 920 832 651 729
72" 1 1⁄2" 918 991 895 712 796
84" 1 1⁄2" 985 1,063 960 770 863
96" 1 1⁄2" 1,049 1,132 1,024 830 930
Straight Pulls - Round Ends
RM4104MP 60" 1" 800 863 761 586 657
72" 1" 865 935 824 646 724
84" 1" 932 1,007 889 706 789
96" 1" 997 1,078 953 765 857
RM4114MP 60" 1 1⁄4" 823 887 788 612 685
72" 1 1⁄4" 888 959 852 671 752
84" 1 1⁄4" 955 1,031 916 730 819
96" 1 1⁄4" 1,020 1,102 981 789 885
RM4124MP 60" 1 1⁄2" 912 985 838 658 737
72" 1 1⁄2" 976 1,055 903 718 802
84" 1 1⁄2" 1,043 1,126 966 777 869
96" 1 1⁄2" 1,109 1,198 1,031 836 936
Offset Pulls - Round Ends
RM4134MP 60" 1" 846 915 807 627 703
72" 1" 913 986 870 687 770
84" 1" 977 1,056 935 747 836
96" 1" 1,044 1,127 1,000 805 903
RM4144MP 60" 1 1⁄4" 869 938 833 652 731
72" 1 1⁄4" 935 1,009 896 713 797
84" 1 1⁄4" 1,001 1,081 961 771 864
96" 1 1⁄4" 1,067 1,152 1,025 831 932
RM4154MP 60" 1 1⁄2" 957 1,034 883 698 782
72" 1 1⁄2" 1,024 1,106 947 758 850
84" 1 1⁄2" 1,089 1,176 1,010 819 916
96" 1 1⁄2" 1,155 1,248 1,075 878 983
RM4144MP
RM4114MP
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM4140MP
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 39
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
Wood Pulls with Collar Mount PostsStraight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4160 12" 1" 559 604 579 440 493
24" 1" 647 697 663 518 581
36" 1" 731 789 746 595 666
48" 1" 822 887 833 676 757
RM4170 12" 1 1⁄4" 568 614 587 449 504
24" 1 1⁄4" 672 727 687 542 608
36" 1 1⁄4" 775 838 788 634 711
48" 1 1⁄4" 849 917 859 699 784
Offset Pulls - Flat Ends RM4180 12" 1" 619 670 636 494 554
24" 1" 714 771 728 580 649
36" 1" 810 876 820 665 746
48" 1" 876 943 884 723 809
RM4190 12" 1 1⁄4" 625 676 644 502 561
24" 1 1⁄4" 738 798 752 602 673
36" 1 1⁄4" 850 919 860 701 785
48" 1 1⁄4" 895 966 903 742 829
RM4170
RM4190
RM
41
60
- R
M4
27
4A
RB
OR
TE
K /
SK
EW
TE
K
ArborTek - Wood Grip Pulls (con't)
SkewTek - Angled End PullsStraight Pull - Forward Segment
PartMax OA Dia. 28/628
313/710 315/711
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM4200-11 16" 1 1⁄2" 543 597 719 775 606 484 543
Offset Pulls - Forward SegmentRM4210LH-11 16" 1 1⁄2" 582 641 764 824 669 521 584
RM4210RH-11 16" 1 1⁄2" 582 641 764 824 669 521 584
Straight Pulls - Rectangular PostsRM4270-12 18" 2" 775 829 1,197 1,293 920 762 854
RM4270-24 30" 2" 848 905 1,308 1,412 1,010 851 952
Offset Pulls - Rectangular PostsRM4272-12 18" 2" 957 1,014 1,382 1,494 1,072 908 1,017
RM4272-24 30" 2" 1,033 1,087 1,491 1,610 1,190 998 1,115
Straight Pulls - Round PostsRM4274-12 18" 2" 775 829 1,197 1,293 920 762 854
RM4274-24 30" 2" 848 905 1,308 1,412 1,010 851 952
• Add $6.50/in. over 30".
RM4200
RM4272
RM4210LH
Wood Add OnWood Species Wood Dia Add OnPremium 1" 24
1 1⁄4" 40
1 1⁄2" 60
Wood Species Wood Dia Add OnSuper Premium 1" 60
1 1⁄4" 80
1 1⁄2" 100
• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
Wood SpeciesDomestic (Standard) Hickory, White Oak, Red Oak, Maple
Premium Beech, Cherry, Birch
Super Premium Mahogany, Jatoba (Brazillian Cherry), Canary, Walnut
• Wood is a natural material, colors and grain will vary between pulls.
• Other wood species are available by request.
• Hickory, sanded unfinished is the stock species; other wood types will require longer lead times and may be
subject to availability,
NOTE: *Add on charges are per wood dowel.
Finish Add OnClear 200*
Dyed 200*
Tung Oil 65*
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.40
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
44
00
- R
M4
51
6C
EN
TR
EX
CenTrex - Shaped Pulls
Curved Pulls
Part CTC 28/628313/710 315/711
3/6054/606
10/612 10B/613
Stock PC 10BE
26/625 26D/626 32D/630 32/629
RM4400-12 12" 407 428 625 677 517 625 385 431
RM4400-20 20" 424 446 694 749 533 694 401 449
Double Curved Pulls
RM4402LH 12" 487 508 694 749 571 694 435 488
RM4402RH 12" 487 508 694 749 571 694 435 488
Straight Radius Pulls
RM4410-12 12" 360 381 625 677 460 625 331 371
RM4410-18 18" 381 404 694 749 480 694 349 392
RM4410-24 24" 404 424 759 818 517 759 385 431
Offset Radius Pulls
RM4412-12 12" 446 466 717 773 533 717 401 449
RM4412-18 18" 466 487 778 841 554 778 419 471
RM4412-24 24" 487 508 844 912 590 844 453 508
Semi-Circular Pulls
RM4420 9" 277 298 563 386 522 263 294
RM4422 12" 298 320 584 405 542 283 315
Radius Push Bars
RM4440LH Up to 36" 529 552 953 1029 786 953 612 684
RM4440RH Up to 36" 529 552 953 1029 786 953 612 684
Compound Radius Push Bars
RM4450LH Up to 36" 1,054 1,119 699 1,472 1,185 1,363 958 1,073
RM4450RH Up to 36" 1,054 1,119 699 1,472 1,185 1,363 958 1,073
Semi-Circular Pulls
RM4500 11" 424 446 866 935 633 470 525
RM4502 11" 424 446 866 935 633 470 525
RM4506 12" 564 611 497 367 410
Side Radius Pull
RM4510 12" 466 508 650 701 571 435 488
Projecting Radius Pull
RM4512 12" 953 1029 728 557 623
Radius Push Bars
RM4516LH Up to 36" 571 613 844 912 671 505 564
RM4516RH Up to 36" 571 613 844 912 671 505 564
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM4516LH
RM4512
RM4510
RM4450LH
RM4440LH
RM4412
RM4410
RM4402
RM4400
RM4500
RM4422
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 41
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
AccenTek™ - Solid Pulls with Accents
Cast Pulls
Part Grip CTCStock PC
10BE3/6054/606
10/61210A/722
10B/61310BL/614
15/61915A/620 20A/624
26/62526D/626
RM4720 1 1⁄2" x 1⁄2" x 12 1⁄2" 8" 516 493 534 534 534 534 534
RM4700W 1 1⁄4" x 5⁄8" x 14" 10" 599 575 619 619 619 619 619
RM4700B 1 1⁄4" x 5⁄8" x 14" 10" 599 575 619 619 619 619 619
Solid Groove Pulls
Part Grip CTC 32D/630 32/629
RM4750 1⁄2" x 1 1⁄4" 12" 350 3941⁄2" x 1 1⁄4" 24" 407 4541⁄2" x 1 1⁄4" 36" 461 5171⁄2" x 1 1⁄4" 48" 516 578
RM4755 3⁄4" x 1 1⁄4" 12" 399 4463⁄4" x 1 1⁄4" 24" 453 5083⁄4" x 1 1⁄4" 36" 510 5703⁄4" x 1 1⁄4" 48" 563 631
Formed Pulls with Distinguished Fastener Heads
Part Grip CTCWrought
BlackStock PC
10BEBlackSuede 32D/630
RM4800 3⁄4" Dia 12" 434 434 434 372
16" 434 434 434 372
24" 479 479 479 427
36" 655 655 655 563
RM4810 1 1⁄2" x 1⁄4" 12" 357 357 357 301
16" 357 357 357 301
24" 395 395 395 346
36" 541 541 541 455
RM4820 1 1⁄2" x 3⁄16" 12" 434 434 434 372
16" 434 434 434 372
24" 479 479 479 427
36" 655 655 655 563
RM4800 x RM4810 12" 792 792 792 673
16" 792 792 792 673
24" 875 875 875 773
36" 1,197 1,197 1,197 1,018
RM4820 x RM4810 12" 792 792 792 673
16" 792 792 792 673
24" 875 875 875 773
36" 1,197 1,197 1,197 1,018
RM
47
00
- R
M4
82
0 X
RM
48
10
AC
CE
NT
EK
RM4700B
RM4750
RM4800
RM4820
• RM4700 pulls contain white or black polycarbonate insert.
• RM4750 & RM4755 pulls add $9.70/in. over 48". CTC up to 60".
• RM4800 series, US32D and US10BE come with Socket Head Screws. Other finishes come with Hex Head Screws.
• RM4800 series longer lengths may be offered, call factory for pricing.
• Specify CTC when ordering.
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.42
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
52
00
- R
M5
28
0P
LA
NT
EK
PlanTek - Flat Front Pulls
Straight Cast Pulls
Part CTC Grip Size3/6054/606
10/612 10B/613
Stock PC 10BE
26/625 26D/626 32D/630 32/629
RM5200-7 7" 1" 310 333 310 310
RM5200-12 12" 1" 356 385 357 356
RM5202 12" 11⁄4" 449 485 450 449
Offset Cast Pulls
RM5204-8 8" 1" 310 333 310 310
RM5204-12 12" 1" 356 385 357 356
Radius End Pulls
RM5210-10 10" 1⁄2" x 1 1⁄4" 633 684 482 350 394
RM5210-12 12" 1⁄2" x 1 1⁄4" 658 711 500 369 412
RM5220-12 12" 3⁄4" x 1 1⁄2" 845 913 537 402 450
RM5220-18 18" 3⁄4" x 1 1⁄2" 941 1,017 593 454 510
Square End Pulls
RM5230-10 10" 1⁄2" x 1 1⁄4" 586 633 389 265 297
RM5230-12 12" 1⁄2" x 1 1⁄4" 614 663 405 282 314
RM5240-12 12" 3⁄4" x 1 1⁄2" 776 840 425 299 334
RM5240-18 18" 3⁄4" x 1 1⁄2" 868 939 443 316 354
Bent End Pulls
RM5250-10 10" 1⁄2" x 1 1⁄4" 474 511 370 246 276
RM5250-12 12" 1⁄2" x 1 1⁄4" 495 533 389 265 297
RM5260-12 12" 3⁄4" x 1 1⁄2" 633 684 443 316 354
RM5260-18 18" 3⁄4" x 1 1⁄2" 750 811 482 350 394
Radius End Pulls
RM5270-10 10" 1⁄2" x 3⁄4" 463 334 374
RM5270-12 12" 1⁄2" x 3⁄4" 477 347 390
RM5270-16 16" 1⁄2" x 3⁄4" 512 379 425
Straight Cast Pull
RM5280 9" 1⁄2" x 1⁄2" 144 155 144 144
Push Bars - Radius Ends
RM5212 Up to 36" 1⁄2" x 1 1⁄4" 868 939 573 436 489
RM5222 Up to 36" 3⁄4" x 1 1⁄2" 1,313 1,418 790 613 685
Push Bars - Flat Ends
RM5232 Up to 36" 1⁄2" x 1 1⁄4" 868 939 500 369 412
RM5242 Up to 36" 3⁄4" x 1 1⁄2" 1,291 1,396 593 454 510
• Add $9.70/in. over 36".
• RM5200, RM5202, RM5204 CTC can not be modified.
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
RM5200
RM5210
RM5250
RM5270
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 43
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
55
00
- R
M5
70
2T
RA
DIT
ION
AL
/ C
LA
SS
IC /
MA
RIT
EK
Traditional - Decorative Pulls & PlatesAdd pull price to plate price to make pull plate combination.
Cast Pulls
Part CTCBasePlate
3/6054/606
10/61210B/613
Stock PC 10BE
15/61915A/620
26/625 26D/626
RM5500 6" no 120 128 118 135 120
RM5502 6 7⁄8" yes 196 210 192 224 215
RM5510 12" no 196 210 192 251 233
RM5512 12 7⁄8" yes 272 296 272 346 312
Cast PullsRM5520 8" no 175 190 173 194 175
RM5522 8" yes 215 231 211 231 215
Cast Pulls
Part Size3/6054/606
10/61210B/613
Stock PC 10BE
15/61915A/620
26/625 26D/626
RM5530 5 1⁄2 " 61 67 61 74 61
RM5532 7 1⁄2" 89 96 89 102 95
RM5534 12" 264 285 261 280 264
Heavy Decorative Plates - .090" ThickRM5590A 3" x 12" 103 113 104 125 114
RM5590B 3 1⁄2" x 15" 114 124 113 133 126
RM5590C 4" x 16" 126 137 125 144 134
Heavy Decorative Plates - .090" ThickRM5592A 3" x 12" 103 113 104 125
RM5592B 3 1⁄2" x 15" 114 124 113 133
RM5592C 4" x 16" 126 137 125 144
Heavy Decorative Plates - .090" ThickRM5594B 3 1⁄2" x 15" 207 224 206 225 215
Rope Border Cast PlatesRM5596A 3" x 12" 126 137 125 133 126
RM5596B 3 1⁄2" x 15" 145 158 144 153 145
Plain Cast Plate - 5⁄16" ThickRM5598B 3 1⁄2" x 15" 166 177 164 172 166
Classic - Finial Door Pulls
MariTek - Tapered Pulls
1" Door Pulls
Part CTC GripBase Plate
3/6054/606
10/612 10B/613
Stock PC 10BE
15/61915A/620
26/625 26D/626
RM5650 10" Plain no 413 447 431 487 456
RM5652 10" Rope no 413 447 431 487 456
RM5654 10" Fluted no 413 447 431 487 456
RM5660 10" Plain yes 462 498 482 536 505
RM5662 10" Rope yes 462 498 482 536 505
RM5664 10" Fluted yes 462 498 482 536 505
1" Offset Door PullRM5670 10" Plain no 466 505 487 517 508
Straight Door Pulls
Part CTC3/605 4/606 10B/613
Stock PC 10BE
14/61815/619
26/625 26D/626
RM5700 6" 305 326 318 313 323
RM5702 12" 323 349 336 332 340
Finial Style Number (example: RM5650-4)
Suffix Finial Style:
1 Plain
2 Urn
3 Berry
4 Pinecone
• To order suffix finial style number.
• Add $6.50/in. for longer pulls up to 36".
1 2 3 4
RM5522
RM5530
RM5590RM5592
RM5596
RM5652-4
RM5700
RM5594
RM5512
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.44
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
60
60
- R
M6
07
2E
NG
LIS
H B
RID
LE L
EA
TH
ER
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6060 12" 1" 776 839 718 589 660
24" 1" 1,151 1,243 1,049 887 996
36" 1" 1,526 1,646 1,358 1,188 1,330
48" 1" 1,899 2,050 1,667 1,489 1,669
60" 1" 2,288 2,470 1,978 1,791 2,006
72" 1" 2,675 2,890 2,289 2,092 2,343
84" 1" 2,892 3,123 2,407 2,207 2,471
96" 1" 3,107 3,357 2,526 2,324 2,601
RM6061 12" 1 1⁄4" 866 934 815 682 764
24" 1 1⁄4" 1,409 1,521 1,276 1,108 1,241
36" 1 1⁄4" 1,952 2,107 1,715 1,534 1,718
48" 1 1⁄4" 2,399 2,592 2,097 1,905 2,134
60" 1 1⁄4" 2,847 3,074 2,479 2,278 2,550
72" 1 1⁄4" 2,992 3,231 2,623 2,416 2,706
84" 1 1⁄4" 3,134 3,386 2,766 2,555 2,863
96" 1 1⁄4" 3,279 3,541 2,886 2,672 2,994
RM6062 12" 1 1⁄2" 985 1,064 916 779 874
24" 1 1⁄2" 1,572 1,698 1,414 1,242 1,390
36" 1 1⁄2" 2,157 2,331 1,889 1,704 1,908
48" 1 1⁄2" 2,633 2,843 2,112 1,921 2,151
60" 1 1⁄2" 3,107 3,357 2,335 2,138 2,394
72" 1 1⁄2" 3,280 3,543 2,559 2,355 2,636
84" 1 1⁄2" 3,454 3,730 2,781 2,571 2,879
96" 1 1⁄2" 3,627 3,918 3,004 2,788 3,122
Offset Pulls - Flat EndsRM6070 12" 1" 815 880 753 621 696
24" 1" 1,189 1,283 1,084 921 1,031
36" 1" 1,564 1,688 1,391 1,221 1,368
48" 1" 1,937 2,092 1,701 1,522 1,704
60" 1" 2,327 2,512 2,013 1,824 2,042
72" 1" 2,714 2,931 2,323 2,125 2,380
84" 1" 2,929 3,166 2,440 2,240 2,509
96" 1" 3,146 3,397 2,560 2,356 2,638
RM6071 12" 1 1⁄4" 904 976 848 715 800
24" 1 1⁄4" 1,447 1,563 1,309 1,140 1,277
36" 1 1⁄4" 1,990 2,149 1,748 1,567 1,754
48" 1 1⁄4" 2,438 2,632 2,130 1,938 2,172
60" 1 1⁄4" 2,886 3,117 2,513 2,309 2,588
72" 1 1⁄4" 3,029 3,271 2,657 2,449 2,742
84" 1 1⁄4" 3,173 3,427 2,800 2,589 2,899
96" 1 1⁄4" 3,317 3,582 2,920 2,705 3,029
RM6072 12" 1 1⁄2" 1,024 1,106 949 813 910
24" 1 1⁄2" 1,611 1,739 1,448 1,275 1,428
36" 1 1⁄2" 2,196 2,372 1,923 1,738 1,945
48" 1 1⁄2" 2,671 2,885 2,146 1,954 2,189
60" 1 1⁄2" 3,146 3,397 2,369 2,171 2,432
72" 1 1⁄2" 3,318 3,583 2,592 2,388 2,673
84" 1 1⁄2" 3,492 3,771 2,815 2,603 2,916
96" 1 1⁄2" 3,665 3,958 3,038 2,819 3,159
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.
• Specify leather color.
NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.
English Bridle Leather Pulls
RM6061
RM6071
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 45
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
EN
GLI
SH
BR
IDLE
LE
AT
HE
RR
M6
08
0 -
RM
60
92
Straight Pulls - Round Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6080 12" 1" 860 929 758 627 702
24" 1" 1,151 1,243 1,089 926 1,038
36" 1" 1,526 1,646 1,397 1,226 1,374
48" 1" 1,899 2,050 1,708 1,528 1,712
60" 1" 2,288 2,470 2,018 1,829 2,048
72" 1" 2,675 2,890 2,328 2,131 2,387
84" 1" 2,892 3,123 2,447 2,246 2,515
96" 1" 3,107 3,357 2,565 2,361 2,645
RM6081 12" 1 1⁄4" 866 934 854 720 806
24" 1 1⁄4" 1,409 1,521 1,315 1,145 1,283
36" 1 1⁄4" 1,952 2,107 1,754 1,572 1,761
48" 1 1⁄4" 2,399 2,592 2,136 1,943 2,177
60" 1 1⁄4" 2,847 3,074 2,518 2,315 2,593
72" 1 1⁄4" 2,992 3,231 2,663 2,455 2,749
84" 1 1⁄4" 3,134 3,386 2,806 2,594 2,906
96" 1 1⁄4" 3,279 3,541 2,925 2,710 3,036
RM6082 12" 1 1⁄2" 985 1,064 954 818 917
24" 1 1⁄2" 1,572 1,698 1,453 1,280 1,434
36" 1 1⁄2" 2,157 2,331 1,929 1,743 1,952
48" 1 1⁄2" 2,633 2,843 2,151 1,959 2,194
60" 1 1⁄2" 3,107 3,357 2,374 2,176 2,437
72" 1 1⁄2" 3,280 3,543 2,598 2,393 2,680
84" 1 1⁄2" 3,454 3,730 2,820 2,609 2,921
96" 1 1⁄2" 3,627 3,918 3,043 2,826 3,164
Offset Pulls - Round EndsRM6090 12" 1" 898 970 792 660 738
24" 1" 1,271 1,373 1,122 959 1,073
36" 1" 1,645 1,777 1,430 1,259 1,410
48" 1" 2,019 2,181 1,741 1,561 1,747
60" 1" 2,408 2,600 2,052 1,862 2,085
72" 1" 2,796 3,020 2,363 2,163 2,424
84" 1" 3,013 3,253 2,480 2,279 2,551
96" 1" 3,228 3,485 2,599 2,394 2,682
RM6091 12" 1 1⁄4" 985 1,064 888 753 844
24" 1 1⁄4" 1,529 1,650 1,348 1,178 1,320
36" 1 1⁄4" 2,072 2,237 1,787 1,605 1,797
48" 1 1⁄4" 2,519 2,721 2,169 1,977 2,213
60" 1 1⁄4" 2,967 3,205 2,552 2,348 2,630
72" 1 1⁄4" 3,111 3,360 2,696 2,488 2,787
84" 1 1⁄4" 3,255 3,517 2,839 2,627 2,942
96" 1 1⁄4" 3,399 3,671 2,959 2,743 3,072
RM6092 12" 1 1⁄2" 1,106 1,194 988 851 953
24" 1 1⁄2" 1,692 1,827 1,487 1,314 1,470
36" 1 1⁄2" 2,279 2,461 1,962 1,776 1,989
48" 1 1⁄2" 2,754 2,973 2,185 1,992 2,231
60" 1 1⁄2" 3,228 3,485 2,408 2,208 2,474
72" 1 1⁄2" 3,400 3,672 2,631 2,426 2,716
84" 1 1⁄2" 3,574 3,860 2,855 2,643 2,959
96" 1 1⁄2" 3,746 4,046 3,078 2,858 3,202
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.
• Specify leather color.
NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.
English Bridle Leather Pulls (con't)
RM6081
RM6091
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.46
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
UP
HO
LS
TE
RY
LE
AT
HE
RR
M6
16
0 -
RM
61
72
Upholstery Leather Pulls
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.
• Specify leather color.
NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6160 12" 1" 728 788 654 541 607
24" 1" 1,032 1,115 853 741 829
36" 1" 1,427 1,541 1,184 1,050 1,175
48" 1" 1,821 1,966 1,494 1,360 1,522
60" 1" 2,103 2,273 1,675 1,539 1,724
72" 1" 2,513 2,714 1,985 1,850 2,072
84" 1" 2,685 2,899 2,090 1,955 2,189
96" 1" 2,911 3,145 2,209 2,074 2,324
RM6161 12" 1 1⁄4" 819 884 719 607 680
24" 1 1⁄4" 1,429 1,543 1,229 1,093 1,225
36" 1 1⁄4" 2,001 2,162 1,668 1,533 1,717
48" 1 1⁄4" 2,474 2,672 2,050 1,916 2,145
60" 1 1⁄4" 2,820 3,046 2,336 2,201 2,465
72" 1 1⁄4" 2,972 3,210 2,481 2,345 2,627
84" 1 1⁄4" 3,123 3,373 2,591 2,456 2,751
96" 1 1⁄4" 3,276 3,537 2,711 2,576 2,886
RM6162 12" 1 1⁄2" 930 1,006 768 655 734
24" 1 1⁄2" 1,548 1,673 1,375 1,240 1,388
36" 1 1⁄2" 2,166 2,339 1,851 1,717 1,922
48" 1 1⁄2" 2,667 2,880 2,074 1,939 2,173
60" 1 1⁄2" 3,166 3,420 2,297 2,162 2,421
72" 1 1⁄2" 3,349 3,617 2,520 2,386 2,672
84" 1 1⁄2" 3,532 3,815 2,743 2,608 2,921
96" 1 1⁄2" 3,714 4,011 2,967 2,832 3,172
Offset Pulls - Flat EndsRM6170 12" 1" 769 830 687 575 644
24" 1" 1,072 1,158 886 774 868
36" 1" 1,467 1,585 1,218 1,083 1,213
48" 1" 1,860 2,009 1,529 1,393 1,561
60" 1" 2,144 2,315 1,707 1,573 1,762
72" 1" 2,553 2,757 2,019 1,884 2,110
84" 1" 2,725 2,943 2,124 1,989 2,228
96" 1" 2,951 3,188 2,243 2,107 2,361
RM6171 12" 1 1⁄4" 859 928 753 641 717
24" 1 1⁄4" 1,469 1,587 1,263 1,128 1,263
36" 1 1⁄4" 2,042 2,205 1,701 1,567 1,754
48" 1 1⁄4" 2,514 2,715 2,085 1,948 2,183
60" 1 1⁄4" 2,861 3,091 2,369 2,235 2,502
72" 1 1⁄4" 3,013 3,254 2,514 2,380 2,663
84" 1 1⁄4" 3,163 3,417 2,624 2,490 2,788
96" 1 1⁄4" 3,315 3,580 2,746 2,609 2,922
RM6172 12" 1 1⁄2" 971 1,049 801 689 771
24" 1 1⁄2" 1,589 1,717 1,409 1,274 1,427
36" 1 1⁄2" 2,206 2,383 1,885 1,750 1,960
48" 1 1⁄2" 2,707 2,923 2,107 1,973 2,209
60" 1 1⁄2" 3,207 3,465 2,331 2,196 2,459
72" 1 1⁄2" 3,389 3,660 2,554 2,419 2,710
84" 1 1⁄2" 3,573 3,858 2,777 2,643 2,960
96" 1 1⁄2" 3,755 4,055 3,000 2,865 3,210
RM6161
RM6171
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 47
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
Upholstery Leather Pulls (con't)
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.
• Specify leather color.
NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.
RM
61
80
- R
M6
19
2U
PH
OL
ST
ER
Y L
EA
TH
ER
Straight Pulls - Round Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6180 12" 1" 816 880 694 580 651
24" 1" 1,118 1,209 893 779 873
36" 1" 1,514 1,634 1,223 1,088 1,219
48" 1" 1,907 2,059 1,534 1,399 1,567
60" 1" 2,191 2,365 1,715 1,579 1,769
72" 1" 2,599 2,808 2,025 1,889 2,115
84" 1" 2,770 2,992 2,129 1,994 2,234
96" 1" 2,998 3,237 2,249 2,113 2,366
RM6181 12" 1 1⁄4" 905 978 759 646 723
24" 1 1⁄4" 1,516 1,637 1,269 1,133 1,270
36" 1 1⁄4" 2,088 2,255 1,706 1,572 1,761
48" 1 1⁄4" 2,560 2,765 2,090 1,955 2,189
60" 1 1⁄4" 2,907 3,139 2,377 2,240 2,510
72" 1 1⁄4" 3,058 3,304 2,519 2,385 2,671
84" 1 1⁄4" 3,210 3,467 2,630 2,495 2,794
96" 1 1⁄4" 3,362 3,631 2,751 2,616 2,929
RM6182 12" 1 1⁄2" 1,017 1,099 807 695 777
24" 1 1⁄2" 1,636 1,767 1,415 1,279 1,433
36" 1 1⁄2" 2,252 2,433 1,890 1,755 1,966
48" 1 1⁄2" 2,754 2,973 2,113 1,979 2,216
60" 1 1⁄2" 3,254 3,513 2,336 2,201 2,465
72" 1 1⁄2" 3,435 2,691 2,561 2,425 2,716
84" 1 1⁄2" 3,618 3,908 2,784 2,648 2,965
96" 1 1⁄2" 3,801 4,104 3,006 2,870 3,215
Offset Pulls - Round EndsRM6190 12" 1" 856 924 726 614 689
24" 1" 1,159 1,251 926 814 911
36" 1" 1,554 1,678 1,257 1,122 1,257
48" 1" 1,947 2,102 1,568 1,433 1,605
60" 1" 2,231 2,409 1,748 1,613 1,806
72" 1" 2,640 2,850 2,058 1,924 2,154
84" 1" 2,811 3,036 2,163 2,028 2,272
96" 1" 3,039 3,281 2,283 2,147 2,405
RM6191 12" 1 1⁄4" 946 1,022 793 680 761
24" 1 1⁄4" 1,557 1,680 1,302 1,167 1,307
36" 1 1⁄4" 2,128 2,299 1,741 1,607 1,798
48" 1 1⁄4" 2,600 2,809 2,124 1,989 2,228
60" 1 1⁄4" 2,947 3,183 2,409 2,275 2,548
72" 1 1⁄4" 3,099 3,347 2,553 2,418 2,708
84" 1 1⁄4" 3,251 3,510 2,663 2,529 2,833
96" 1 1⁄4" 3,402 3,674 2,785 2,649 2,967
RM6192 12" 1 1⁄2" 1,058 1,141 840 727 816
24" 1 1⁄2" 1,676 1,807 1,448 1,314 1,471
36" 1 1⁄2" 2,292 2,476 1,925 1,789 2,004
48" 1 1⁄2" 2,794 3,017 2,147 2,012 2,254
60" 1 1⁄2" 3,294 3,557 2,369 2,235 2,502
72" 1 1⁄2" 3,475 3,754 2,594 2,459 2,754
84" 1 1⁄2" 3,659 3,951 2,816 2,682 3,004
96" 1 1⁄2" 3,841 4,147 3,040 2,905 3,254
RM6181
RM6191
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.48
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
62
00
- R
M6
24
0LE
AT
HE
R O
VA
L
Leather Oval - Ergonomic Pulls
True Oval
PartMax OA Grip Size
Stock PC 10BE 32D/630 32/629
RM6200 12" 1" x 1 1/2" 951 815 913
24" 1" x 1 1/2" 1,332 1,163 1,302
36" 1" x 1 1/2" 1,689 1,510 1,691
48" 1" x 1 1/2" 2,048 1,857 2,080
60" 1" x 1 1/2" 2,405 2,205 2,469
72" 1" x 1 1/2" 2,763 2,552 2,859
84" 1" x 1 1/2" 3,120 2,900 3,248
96" 1" x 1 1/2" 3,478 3,247 3,636
Flat Oval - 3⁄4" Diameter Posts
RM6220 12" 3/4" x 1 1/2" 991 854 957
24" 3/4" x 1 1/2" 1,366 1,196 1,340
36" 3/4" x 1 1/2" 1,719 1,538 1,723
48" 3/4" x 1 1/2" 2,071 1,881 2,105
60" 3/4" x 1 1/2" 2,423 2,223 2,489
72" 3/4" x 1 1/2" 2,775 2,564 2,871
84" 3/4" x 1 1/2" 3,127 2,907 3,256
96" 3/4" x 1 1/2" 3,479 3,248 3,638
Flat Oval - 1" Diameter Posts
RM6230 12" 3/4" x 1 1/2" 1,049 887 996
24" 3/4" x 1 1/2" 1,401 1,230 1,378
36" 3/4" x 1 1/2" 1,754 1,572 1,761
48" 3/4" x 1 1/2" 2,105 1,915 2,144
60" 3/4" x 1 1/2" 2,458 2,256 2,527
72" 3/4" x 1 1/2" 2,810 2,598 2,910
84" 3/4" x 1 1/2" 3,162 2,941 3,293
96" 3/4" x 1 1/2" 3,514 3,282 3,676
Flat Oval - 3⁄4"x 1 1⁄2" Diameter Posts
RM6240 12" 3/4" x 1 1/2" 1,182 1,017 1,139
24" 3/4" x 1 1/2" 1,534 1,359 1,522
36" 3/4" x 1 1/2" 1,886 1,701 1,905
48" 3/4" x 1 1/2" 2,239 2,043 2,288
60" 3/4" x 1 1/2" 2,590 2,385 2,671
72" 3/4" x 1 1/2" 2,942 2,727 3,054
84" 3/4" x 1 1/2" 3,295 3,069 3,437
96" 3/4" x 1 1/2" 3,647 3,412 3,821
• Add $6.50/in. over 96".
• MP (Mid Post) - Add $68 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Specify leather color.
NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.
RM6200
RM6220
RM6230
RM6240
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 49
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
Flush Leather Pulls
Straight Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6300 12" 1" 866 934 819 686 768
24" 1" 1,291 1,395 1,245 1,079 1,209
36" 1" 1,718 1,855 1,649 1,470 1,647
48" 1" 2,144 2,315 2,053 1,863 2,087
60" 1" 2,570 2,775 2,457 2,255 2,526
72" 1" 2,996 3,235 2,860 2,648 2,965
84" 1" 3,422 3,695 3,264 3,040 3,404
96" 1" 3,848 4,157 3,668 3,431 3,843
RM6310 12" 1 1⁄4" 1,038 1,121 951 815 913
24" 1 1⁄4" 1,482 1,599 1,381 1,210 1,355
36" 1 1⁄4" 1,926 2,079 1,786 1,603 1,796
48" 1 1⁄4" 2,368 2,558 2,191 1,998 2,238
60" 1 1⁄4" 2,812 3,038 2,598 2,393 2,680
72" 1 1⁄4" 3,256 3,517 3,004 2,788 3,122
84" 1 1⁄4" 3,701 3,996 3,410 3,181 3,563
96" 1 1⁄4" 4,143 4,475 3,817 3,576 4,006
RM6320 12" 1 1⁄2" 1,123 1,214 1,058 898 1,005
24" 1 1⁄2" 1,579 1,704 1,476 1,304 1,460
36" 1 1⁄2" 2,035 2,197 1,895 1,710 1,915
48" 1 1⁄2" 2,490 2,689 2,314 2,117 2,370
60" 1 1⁄2" 2,946 3,181 2,732 2,522 2,826
72" 1 1⁄2" 3,401 3,674 3,150 2,928 3,281
84" 1 1⁄2" 3,857 4,166 3,569 3,336 3,736
96" 1 1⁄2" 4,313 4,658 3,987 3,742 4,191
RM
63
00
- R
M6
32
0FL
US
H L
EA
TH
ER
RM6310
• Add $6.50/in. over 96".
• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Specify leather type and color.
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.50
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
63
04
- R
M6
35
0FL
US
H L
EA
TH
ER
Flush Leather Pulls (cont')
Offset Pulls - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6330 12" 1" 904 976 858 724 812
24" 1" 1,330 1,436 1,284 1,117 1,251
36" 1" 1,755 1,897 1,688 1,509 1,690
48" 1" 2,182 2,356 2,093 1,901 2,129
60" 1" 2,608 2,816 2,496 2,293 2,568
72" 1" 3,033 3,277 2,899 2,686 3,008
84" 1" 3,460 3,737 3,303 3,078 3,448
96" 1" 3,887 4,197 3,708 3,470 3,887
RM6340 12" 1 1⁄4" 1,077 1,163 990 853 956
24" 1 1⁄4" 1,520 1,641 1,420 1,247 1,397
36" 1 1⁄4" 1,964 2,121 1,826 1,642 1,839
48" 1 1⁄4" 2,407 2,600 2,232 2,037 2,281
60" 1 1⁄4" 2,850 3,078 2,638 2,432 2,723
72" 1 1⁄4" 3,294 3,558 3,043 2,826 3,164
84" 1 1⁄4" 3,738 4,037 3,449 3,219 3,607
96" 1 1⁄4" 4,182 4,516 3,856 3,614 4,048
RM6350 12" 1 1⁄2" 1,162 1,254 1,097 935 1,047
24" 1 1⁄2" 1,617 1,746 1,516 1,342 1,503
36" 1 1⁄2" 2,073 2,238 1,935 1,748 1,958
48" 1 1⁄2" 2,528 2,731 2,353 2,154 2,413
60" 1 1⁄2" 2,985 3,223 2,772 2,561 2,868
72" 1 1⁄2" 3,439 3,715 3,190 2,967 3,323
84" 1 1⁄2" 3,895 4,208 3,608 3,374 3,778
96" 1 1⁄2" 4,350 4,699 4,026 3,781 4,234
Straight Pulls - Round Ends
RM6304 12" 1" 953 1,029 869 735 823
24" 1" 1,379 1,489 1,296 1,128 1,264
36" 1" 1,805 1,950 1,699 1,520 1,702
48" 1" 2,231 2,410 2,103 1,913 2,142
60" 1" 2,657 2,869 2,507 2,304 2,581
72" 1" 3,083 3,330 2,912 2,697 3,020
84" 1" 3,509 3,790 3,314 3,089 3,459
96" 1" 3,935 4,250 3,718 3,481 3,898
RM6314 12" 1 1⁄4" 1,125 1,216 1,003 865 967
24" 1 1⁄4" 1,569 1,694 1,430 1,259 1,410
36" 1 1⁄4" 2,012 2,174 1,836 1,652 1,851
48" 1 1⁄4" 2,456 2,653 2,243 2,047 2,293
60" 1 1⁄4" 2,900 3,131 2,649 2,442 2,735
72" 1 1⁄4" 3,344 3,611 3,054 2,837 3,177
84" 1 1⁄4" 3,787 4,090 3,461 3,231 3,618
96" 1 1⁄4" 4,231 4,569 3,867 3,626 4,061
RM6324 12" 1 1⁄2" 1,211 1,308 1,110 947 1,060
24" 1 1⁄2" 1,667 1,799 1,528 1,353 1,515
36" 1 1⁄2" 2,122 2,291 1,946 1,758 1,970
48" 1 1⁄2" 2,578 2,784 2,365 2,165 2,425
60" 1 1⁄2" 3,032 3,276 2,783 2,572 2,882
72" 1 1⁄2" 3,489 3,768 3,200 2,978 3,336
84" 1 1⁄2" 3,944 4,261 3,620 3,385 3,791
96" 1 1⁄2" 4,400 4,752 4,038 3,791 4,246
• Add $6.50/in. over 96".
• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)
• Specify leather type and color.
RM6340
RM6314
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 51
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
63
34
- R
M6
35
4FL
US
H L
EA
TH
ER
Offset Pulls - Round Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6334 12" 1" 990 1,070 908 773 867
24" 1" 1,417 1,531 1,336 1,166 1,306
36" 1" 1,844 1,991 1,739 1,559 1,745
48 " 1" 2,270 2,450 2,142 1,951 2,184
60" 1" 2,696 2,911 2,546 2,342 2,623
72" 1" 3,122 3,371 2,951 2,735 3,062
84" 1" 3,548 3,831 3,354 3,127 3,503
96" 1" 3,974 4,292 3,758 3,520 3,942
RM6344 12" 1 1⁄4" 1,164 1,257 1,064 903 1,011
24" 1 1⁄4" 1,608 1,735 1,470 1,297 1,452
36" 1 1⁄4" 2,050 2,215 1,876 1,691 1,894
48" 1 1⁄4" 2,494 2,695 2,283 2,086 2,336
60" 1 1⁄4" 2,939 3,173 2,688 2,481 2,778
72" 1 1⁄4" 3,382 3,653 3,094 2,874 3,219
84" 1 1⁄4" 3,825 4,132 3,500 3,269 3,662
96" 1 1⁄4" 4,269 4,610 3,906 3,664 4,103
RM6354 12" 1 1⁄2" 1,248 1,348 1,149 984 1,103
24" 1 1⁄2" 1,704 1,840 1,567 1,390 1,559
36" 1 1⁄2" 2,159 2,333 1,986 1,797 2,013
48" 1 1⁄2" 2,616 2,825 2,403 2,204 2,468
60" 1 1⁄2" 3,071 3,317 2,821 2,610 2,923
72" 1 1⁄2" 3,527 3,810 3,240 3,017 3,378
84" 1 1⁄2" 3,982 4,301 3,659 3,423 3,834
96" 1 1⁄2" 4,438 4,794 4,077 3,829 4,289
Flush Leather Pulls (cont')
• Add $6.50/in. over 96".
• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for
guidelines.)
• Specify leather type and color.
RM6344
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.52
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
64
00
- R
M6
44
0U
PH
OL
ST
ER
Y L
EA
TH
ER
Upholstery Leather GeoMetek - Narrow Profile Pulls
Straight Square End Pulls
Part CTC Grip SizeStock PC
10BE 32D/630 32/629
RM6400 12" 3/4" x 3/4" 645 532 596
24" 3/4" x 3/4" 1,035 901 1,009
36" 3/4" x 3/4" 1,404 1,269 1,421
48" 3/4" x 3/4" 1,772 1,637 1,833
RM6440 12" 1 1/4" x 1 1/4" 748 635 712
24" 1 1/4" x 1 1/4" 1,236 1,102 1,232
36" 1 1/4" x 1 1/4" 1,700 1,566 1,753
48" 1 1/4" x 1 1/4" 2,165 2,031 2,275
Straight Rectangular End Pulls
RM6410 12" 3/4" x 1 1/2" 754 642 718
24" 3/4" x 1 1/2" 1,086 951 1,065
36" 3/4" x 1 1/2" 1,396 1,261 1,412
48" 3/4" x 1 1/2" 1,704 1,570 1,758
60" 3/4" x 1 1/2" 2,015 1,880 2,104
72" 3/4" x 1 1/2" 2,325 2,189 2,451
84" 3/4" x 1 1/2" 2,634 2,498 2,799
96" 3/4" x 1 1/2" 2,943 2,808 3,146
Offset Square End Pulls
RM6420 12" 3/4" x 3/4" 684 572 641
24" 3/4" x 3/4" 1,075 939 1,053
36" 3/4" x 3/4" 1,442 1,308 1,465
48" 3/4" x 3/4" 1,811 1,676 1,877
Offset Rectangular End Pulls
RM6430 12" 3/4" x 1 1/2" 794 681 763
24" 3/4" x 1 1/2" 1,125 990 1,110
36" 3/4" x 1 1/2" 1,435 1,299 1,456
48" 3/4" x 1 1/2" 1,744 1,610 1,802
60" 3/4" x 1 1/2" 2,053 1,919 2,149
72" 3/4" x 1 1/2" 2,363 2,229 2,496
84" 3/4" x 1 1/2" 2,673 2,538 2,842
96" 3/4" x 1 1/2" 2,981 2,847 3,189
RM6420
RM6400
RM6430
RM6410
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 53
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
65
00
- R
M6
73
0LE
AT
HE
R
Leather - Small Pulls for Cabinets, Casework & Closet Doors
Straight Surface Wrapped - Flat Ends
PartMax OA Dia.
3/6054/606
10/61210B/613
Stock PC 10BE 32D/630 32/629
RM6500-4 5 7⁄8" 1⁄2" 197 213 208 148 158
RM6500-5 6 7⁄8" 1⁄2" 211 227 218 159 170
RM6510-5 6 7⁄8" 5⁄8" 242 261 249 188 204
RM6510-6 7 7⁄8" 5⁄8" 271 294 276 216 231
Offset Surface Wrapped - Flat Ends
RM6530-5 7" 5⁄8" 322 242 260
RM6530-6 8" 5⁄8" 351 268 287
Straight Surface Wrapped - Round Ends
RM6540-4 5 7⁄8" 1⁄2" 217 235 226 167 178
RM6540-5 6 7⁄8" 1⁄2" 232 252 239 180 192
RM6550-5 7" 5⁄8" 264 285 269 209 222
RM6550-6 8" 5⁄8" 293 315 312 234 250
Offset Surface Wrapped - Round Ends
RM6570-5 7" 5⁄8" 344 262 213
RM6570-6 8" 5⁄8" 374 288 247
Straight Flush Wrapped - Flat Ends
RM6610-5 6 7⁄8" 5⁄8" 271 294 260 199 213
RM6610-6 7 7⁄8" 5⁄8" 305 331 327 232 247
Offset Flush Wrapped - Flat Ends
RM6630-5 6 7⁄8" 5⁄8" 336 242 260
RM6630-6 7 7⁄8" 5⁄8" 372 276 295
Straight Flush Wrapped - Round Ends
RM6650-5 6 7⁄8" 5⁄8" 286 307 273 213 227
RM6650-6 7 7⁄8" 5⁄8" 321 348 339 245 263
Offset Flush Wrapped - Round Ends
RM6670-5 6 7⁄8" 5⁄8" 351 256 273
RM6670-6 7 7⁄8" 5⁄8" 383 288 307
Straight Full Wrapped - Flat Ends
RM6700-4 5 7⁄8" 1⁄2" 226 243 240 191 206
RM6700-5 6 7⁄8" 1⁄2" 254 273 271 216 231
RM6710-5 6 7⁄8" 5⁄8" 277 300 297 237 255
RM6710-6 7 7⁄8" 5⁄8" 311 335 332 268 287
Offset Full Wrapped - Flat Ends
RM6730-5 6 7⁄8" 5⁄8" 348 280 299
RM6730-6 7 7⁄8" 5⁄8" 381 311 332
• Any size made to order.
• Specify leather type and color.
RM6500
RM6530
RM6650
RM6670
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.54
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
RM
72
10
- R
M7
45
0N
EO
CY
LIN
DE
R /
NE
OM
ITR
E
NeoMitre - with or without GripZone
Straight Pulls without GripZone
Part CTC Dia.Stock PC
10BE 32D/630 32/629
RM7300 12" 1" 470 357 400
24" 1" 551 435 486
36" 1" 655 511 572
RM7310 12" 1 1⁄4" 633 489 548
24" 1 1⁄4" 680 534 597
36" 1 1⁄4" 726 578 648
RM7320 12" 1 1⁄2" 728 580 650
24" 1 1⁄2" 776 626 702
36" 1 1⁄2" 823 673 752
Offset Pulls without GripZoneRM7330 12" 1" 515 400 447
24" 1" 594 476 533
36" 1" 700 553 620
RM7340 12" 1 1⁄4" 678 530 595
24" 1 1⁄4" 723 576 644
36" 1 1⁄4" 771 621 695
RM7350 12" 1 1⁄2" 773 623 697
24" 1 1⁄2" 820 670 749
36" 1 1⁄2" 867 714 799
Push Bars without GripZoneRM7302 Up to 36" 1" 655 511 572
RM7312 Up to 36" 1 1⁄4" 726 578 648
RM7322 Up to 36" 1 1⁄2" 823 673 752
Straight Pulls with GripZonePart CTC Dia. 32/629
RM7400 12" 1" 520
24" 1" 606
36" 1" 692
RM7410 12" 1 1⁄4" 668
24" 1 1⁄4" 718
36" 1 1⁄4" 767
RM7420 12" 1 1⁄2" 770
24" 1 1⁄2" 822
36" 1 1⁄2" 873
Offset Pulls with GripZoneRM7430 12" 1" 567
24" 1" 653
36" 1" 741
RM7440 12" 1 1⁄4" 715
24" 1 1⁄4" 765
36" 1 1⁄4" 816
RM7450 12" 1 1⁄2" 818
24" 1 1⁄2" 869
36" 1 1⁄2" 922
Push Bars with GripZoneRM7402 Up to 36" 1" 692
RM7412 Up to 36" 1 1⁄4" 767
RM7422 Up to 36" 1 1⁄2" 873
• Add $6.50/in. over 36".
NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for
flush and wide stile doors.
NeoCylinder - with or without GripZone
Straight Pulls without GripZone
Part CTC Dia.Stock PC
10BE 32D/630 32/629
RM7210 12" 1 1⁄4" 445 331 370
24" 1 1⁄4" 504 386 434
36" 1 1⁄4" 562 443 495
Offset Pulls without GripZoneRM7220 12" 1 1⁄4" 489 374 418
24" 1 1⁄4" 548 430 481
36" 1 1⁄4" 608 486 545
Straight Pulls with GripZoneRM7230 12" 1 1⁄4" 492
24" 1 1⁄4" 556
36" 1 1⁄4" 620
Offset Pulls with GripZoneRM7240 12" 1 1⁄4" 535
24" 1 1⁄4" 599
36" 1 1⁄4" 662
Push Bar without GripZoneRM7212 Up to 36" 1 1⁄4" 562 443 495
Push Bar with GripZoneRM7232 Up to 36" 1 1⁄4" 620
• Add $6.50/in. over 36".
RM7210
RM7240
RM7310
RM7340
RM7410
RM7440
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 55
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
GeoMetek - Hex Pulls
Flat End - Square Post
Part Max OA Grip Stock PC / 10BE 32D/630 32/629
RM7700 12" 1" 542 415 465
24" 1" 615 462 517
36" 1" 667 509 569
48" 1" 717 555 622
60" 1" 767 602 673
72" 1" 817 648 726
84" 1" 867 694 777
96" 1" 917 742 830
GeoMetek - Diamond Pulls
Flat End - Square Post
Part Max OA Grip Stock PC / 10BE 32D/630 32/629
RM7800 12" 3⁄4" x 3⁄4" 460 334 372
24" 3⁄4" x 3⁄4" 508 379 425
36" 3⁄4" x 3⁄4" 559 426 476
48" 3⁄4" x 3⁄4" 633 471 528
RM7840 12" 1" x 1" 506 367 410
24" 1" x 1" 559 417 468
36" 1" x 1" 614 469 524
48" 1" x 1" 696 518 581
Flat End - Diamond Post
RM7805 12" 3⁄4" x 3⁄4" 489 361 405
24" 3⁄4" x 3⁄4" 539 408 456
36" 3⁄4" x 3⁄4" 590 454 510
48" 3⁄4" x 3⁄4" 665 501 560
RM7845 12" 1" x 1" 539 397 446
24" 1" x 1" 592 449 502
36" 1" x 1" 649 500 561
48" 1" x 1" 731 551 616
Flat End - Offset Post
RM7825 12" 3⁄4" x 3⁄4" 526 399 447
24" 3⁄4" x 3⁄4" 575 446 498
36" 3⁄4" x 3⁄4" 627 492 552
48" 3⁄4" x 3⁄4" 701 539 602
RM7860 12" 1" x 1" 552 419 469
24" 1" x 1" 604 468 522
36" 1" x 1" 658 516 579
48" 1" x 1" 736 565 632
Diamond End - Square Post
RM7810 12" 3⁄4" x 3⁄4" 637 475 550
24" 3⁄4" x 3⁄4" 688 522 584
36" 3⁄4" x 3⁄4" 739 569 639
48" 3⁄4" x 3⁄4" 790 616 689
RM7850 12" 1" x 1" 701 523 605
24" 1" x 1" 757 574 643
36" 1" x 1" 813 626 703
48" 1" x 1" 868 677 758
• Add $9.70/in. over 96".
• Add $9.70/in. over 48".
GE
OM
ET
EK
RM
77
00
- R
M7
83
5
RM7700
RM7800
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.56
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
GE
OM
ET
EK
RM
79
00
- R
M7
94
0
GeoMetek - Narrow Profile Pulls
Straight Square End Pulls
Part CTC Grip Size Stock PC / 10BE 32D/630 32/629
RM7900 12" 3⁄4" x 3⁄4" 303 221 248
24" 3⁄4" x 3⁄4" 392 268 300
36" 3⁄4" x 3⁄4" 443 315 352
48" 3⁄4" x 3⁄4" 495 362 406
RM7907 12" 1" x 1" 334 244 273
24" 1" x 1" 431 295 329
36" 1" x 1" 487 346 388
48" 1" x 1" 543 399 447
RM7940 12" 1 1⁄4" x 1 1⁄4" 405 281 315
24" 1 1⁄4" x 1 1⁄4" 464 335 373
36" 1 1⁄4" x 1 1⁄4" 522 388 434
48" 1 1⁄4" x 1 1⁄4" 579 441 492
Straight Square Bridge PullsPart Max OA Grip Size Stock PC / 10BE 32D/630 32/629
RM7902 12" 3⁄4" x 3⁄4" 396 273 305
24" 3⁄4" x 3⁄4" 446 318 357
36" 3⁄4" x 3⁄4" 497 365 409
48" 3⁄4" x 3⁄4" 546 410 459
RM7917 12" 1" x 1" 437 301 338
24" 1" x 1" 490 350 392
36" 1" x 1" 546 402 450
48" 1" x 1" 602 451 506
Straight Rectangular End PullsPart CTC Grip Size Stock PC / 10BE 32D/630 32/629
RM7910 12" 3⁄4" x 1 1⁄2" 378 256 286
24" 3⁄4" x 1 1⁄2" 585 445 498
36" 3⁄4" x 1 1⁄2" 816 634 710
48" 3⁄4" x 1 1⁄2" 1019 822 921
RM7900
• Add $9.70/in. over 48".
• Add $9.70/in. over 48".
RM7902
GeoMetek - Diamond Pulls (cont.)
Diamond End - Diamond Post
Part Max OA Grip Stock PC / 10BE 32D/630 32/629
RM7815 12" 3⁄4" x 3⁄4" 670 506 565
24" 3⁄4" x 3⁄4" 719 551 618
36" 3⁄4" x 3⁄4" 771 599 670
48" 3⁄4" x 3⁄4" 819 644 721
RM7855 12" 1" x 1" 737 557 621
24" 1" x 1" 792 606 680
36" 1" x 1" 847 659 737
48" 1" x 1" 901 708 794
Diamond End - Offset PostRM7835 12" 3⁄4" x 3⁄4" 707 544 607
24" 3⁄4" x 3⁄4" 756 589 660
36" 3⁄4" x 3⁄4" 807 636 712
48" 3⁄4" x 3⁄4" 856 681 763
RM7865 12" 1" x 1" 742 571 638
24" 1" x 1" 794 618 693
36" 1" x 1" 847 668 748
48" 1" x 1" 899 715 801
RM7835
RM7815
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 57
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
RM
79
20
- R
M7
96
0G
EO
ME
TE
K
GeoMetek - Narrow Profile Pulls (cont')
Straight Rectangular Bridge Pulls
Part Max OA Grip Size Stock PC / 10BE 32D/630 32/629
RM7912 12" 3⁄4" x 1 1⁄2" 431 304 341
24" 3⁄4" x 1 1⁄2" 663 493 553
36" 3⁄4" x 1 1⁄2" 868 682 764
48" 3⁄4" x 1 1⁄2" 1074 871 975
Offset Pulls
Part CTC Grip Size Stock PC / 10BE 32D/630 32/629
RM7920 12" 3⁄4" x 3⁄4" 381 258 288
24" 3⁄4" x 3⁄4" 427 301 338
36" 3⁄4" x 3⁄4" 476 346 387
48" 3⁄4" x 3⁄4" 523 389 435
RM7927 12" 1" x 1" 420 284 318
24" 1" x 1" 470 330 370
36" 1" x 1" 523 380 426
48" 1" x 1" 576 427 478
RM7930 12" 3⁄4" x 1 1⁄2" 428 302 339
24" 3⁄4" x 1 1⁄2" 650 482 540
36" 3⁄4" x 1 1⁄2" 847 663 743
48" 3⁄4" x 1 1⁄2" 1043 842 944
Offset Square Bridge Pull
Part Max OA Grip Size Stock PC / 10BE 32D/630 32/629
RM7925 12" 3⁄4" x 3⁄4" 433 311 348
24" 3⁄4" x 3⁄4" 482 356 399
36" 3⁄4" x 3⁄4" 533 403 451
48" 3⁄4" x 3⁄4" 606 448 501
RM7937 12" 1" x 1" 454 326 366
24" 1" x 1" 506 373 419
36" 1" x 1" 560 423 473
48" 1" x 1" 635 470 527
Offset Rectangular Bridge Pull
RM7935 12" 3⁄4" x 1 1⁄2" 466 342 383
24" 3⁄4" x 1 1⁄2" 696 530 594
36" 3⁄4" x 1 1⁄2" 903 720 807
48" 3⁄4" x 1 1⁄2" 1,131 908 1,018
Straight Rectangular End Stepped Post Pull
Part CTC Grip Size Stock PC / 10BE 32D/630 32/629
RM7960 12" 3⁄4" x 3⁄4" 431 304 341
24" 3⁄4" x 3⁄4" 488 357 400
36" 3⁄4" x 3⁄4" 544 408 456
48" 3⁄4" x 3⁄4" 627 461 516
Straight Rectangular End Stepped Post Cast Pull
Part CTC Grip Size3/6054/606
10/61210B/613 15/619
RM7960 12" 3⁄4" x 3⁄4" 420 431 460
• Add $9.70/in. over 48".
RM7920
RM7925
RM7960
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.58
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
LP3
30
1 -
LP
33
05
LOC
KIN
G D
OO
R P
ULL
SY
ST
EM
Locking Door Pulls
PostMount - Round
Part Description3/6054/606
Stock PC 10BE
10B/613 10BL/614 32D/630 32/629
LP3301DBD Half Height Pull - Bolts Down 1,933 1,550 2,088 1,112 1,243
LP3301DBU Half Height Pull - Bolts Up 2,121 1,653 2,291 1,199 1,343
LP3301FHD Full Height Pull - Bolts Down 2,346 1,751 2,537 1,284 1,439
LP3301FHU Full Height Pull - Bolts Up 2,574 1,868 2,781 1,386 1,553
LP3301FHB Full Height Pull - Bolts Up and Down 2,835 2,148 3,060 1,628 1,825
Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)
LP3301DBDBEPB Bent End Both Sides 2,571 1,974 2,776 1,529 1,654
LP3301DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450
LP3301DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450
LP3301DBDPMPB Post Mount Both Sides 2,820 2,107 3,048 1,593 1,785
LP3301DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564
LP3301DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564
Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)
LP3301DBUBEPB Bent End Both Sides 2,571 1,974 2,776 1,529 1,654
LP3301DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450
LP3301DBUBEPC Bent End Cylinder Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450
LP3301DBUPMPB Post Mount Both Sides 2,820 2,107 3,048 1,593 1,785
LP3301DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564
LP3301DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564
Round - 10" Clearance on Cylinder Side
LP3305DBDRound Half Height Pull - Bolts Down /
Minimum of 10" Clearance on Keyside of Pull 1,975 1,593 2,130 1,155 1,285
LP3305FHD Full Height Pull - Bolts Down 2,396 1,799 2,587 1,332 1,486
LP3305FHU Full Height Pull - Bolts Up 2,629 1,918 2,836 1,437 1,604
LP3305FHB Full Height Pull - Bolts Up and Down 2,895 2,206 3,120 1,688 1,884
Horizontal Push/Pull Bar Option - 10" Clearance on Cylinder Side
Part Description3/6054/606
StockPC 10BE
10B/613 10BL/614 32D/630 32/629
LP3305DBDBEPB Bent End Both Sides 2,613 2,017 2,818 1,521 1,697
LP3305DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,294 1,806 2,474 1,338 1,492
LP3305DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,294 1,806 2,474 1,338 1,492
LP3305DBDPMPB Post Mount Both Sides 2,862 2,150 3,089 1,636 1,827
LP3305DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,513 1,923 2,710 1,439 1,605
LP3305DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,513 1,923 2,710 1,439 1,605
• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.
• Horizontal Push/Pull Option, add $13/in. over 36".
Order form available when ordering LP3301 AND LP3305.
LP3305 has a minimum of 10" clearance on the keyside to reduce interference with mobility devices.
Product comes standard with ADA thumbturn.
LP3305DBD
LP3301DBD
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 59
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
Locking Door Pulls
NeoTek with GripZone - Round
Part Description 3/605 32/629
LP3401DBD Half Height Pull - Bolts Down 2,072 1,335
LP3401DBU Half Height Pull - Bolts Up 2,273 1,439
LP3401FHD Full Height Pull - Bolts Down 2,485 1,540
LP3401FHU Full Height Pull - Bolts Up 2,726 1,662
LP3401FHB Full Height Pull - Bolts Up and Down 2,988 1,902
Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)
LP3401DBDBEPB Bent End Both Sides 2,755 1,776
LP3401DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,413 1,556
LP3401DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,413 1,556
LP3401DBDPMPB Post Mount Both Sides 2,755 1,776
LP3401DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,413 1,556
LP3401DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,413 1,556
Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)
LP3401DBUBEPB Bent End Both Sides 3,023 1,915
LP3401DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 2,648 1,677
LP3401DBUBEPC Bent End Cylinder Side - Mating Side Vertical 2,648 1,677
LP3401DBUPMPB Post Mount Both Sides 3,023 1,915
LP3401DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,648 1,677
LP3401DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 2,648 1,677
English Bridle Leather Wrapped - Round
Part Description3/6054/606
Stock PC 10BE
10B/613 10BL/614 32D/630 32/629
LP6061DBD Half Height Pull - Bolts Down 5,383 4,659 5,813 4,395 4,923
LP6061DBU Half Height Pull - Bolts Up 5,570 4,761 6,016 4,493 5,010
LP6061FHD Full Height Pull - Bolts Down 6,853 5,998 7,401 5,695 6,377
LP6061FHU Full Height Pull - Bolts Up 7,081 6,114 7,646 5,808 6,479
LP6061FHB Full Height Pull - Bolts Up and Down 7,342 6,395 7,926 6,080 6,721
Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)
LP6061DBDBEPB* Bent End Both Sides 6,992 5,553 7,551 5,265 5,854
LP6061DBDBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388
LP6061DBDBEPC* Bent End Cylinder Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388
LP6061DBDPMPB* Post Mount Both Sides 6,992 5,553 7,551 5,265 5,854
LP6061DBDPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388
LP6061DBDPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388
• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.
• Horizontal Push/Pull Option, add $13/in. over 36".
*Price includes up to 42" of English Bridle Leather on vertical. Other options available upon request.
LP3
40
1 -
LP
60
61
LOC
KIN
G D
OO
R P
ULL
SY
ST
EM
LP3401DBD
LP6061DBD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.60
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
LP6
06
1 -
LP
61
61
LOC
KIN
G D
OO
R P
ULL
SY
ST
EM
Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)
Part Description3/6054/606
Stock PC 10BE
10B/613 10BL/614 32D/630 32/629
LP6061DBUBEPB* Bent End Both Sides 7,180 5,656 7,754 5,363 5,940
LP6061DBUBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474
LP6061DBUBEPC* Bent End Cylinder Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474
LP6061DBUPMPB* Post Mount Both Sides 7,180 5,656 7,754 5,363 5,940
LP6061DBUPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474
LP6061DBUPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474
PostMount Upholstery Leather Wrapped - Round
LP6161DBD Half Height Pull - Bolts Down 5,277 4,564 5,699 4,302 4,820
LP6161DBU Half Height Pull - Bolts Up 5,465 4,666 5,903 4,402 4,907
LP6161FHD Full Height Pull - Bolts Down 6,510 5,645 7,031 5,352 5,995
LP6161FHU Full Height Pull - Bolts Up 6,737 5,761 7,276 5,465 6,096
LP6161FHB Full Height Pull - Bolts Up and Down 6,997 6,041 7,555 5,738 6,337
Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)
LP6161DBDBEPB* Bent End Both Sides 6,819 5,445 7,364 5,160 5,736
LP6161DBDBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249
LP6161DBDBEPC* Bent End Cylinder Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249
LP6161DBDPMPB* Post Mount Both Sides 6,819 5,445 7,364 5,160 5,736
LP6161DBDPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249
LP6161DBDPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249
Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)
LP6161DBUBEPB* Bent End Both Sides 7,006 5,548 7,567 5,258 5,824
LP6161DBUBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337
LP6161DBUBEPC* Bent End Cylinder Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337
LP6161DBUPMPB* Post Mount Both Sides 7,006 5,548 7,567 5,258 5,824
LP6161DBUPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337
LP6161DBUPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337
• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.
* Price includes up to 42" of English Bridle or Upolstery Leather on vertical.
Other options available upon request.
Locking Door Pulls (con’t)
LP6161DBD
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 61
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
GeoMetek Upholstery Leather Wrapped - Square
Part Description3/6054/606
Stock PC 10BE
10B/613 10BL/614 32D/630 32/629
LP6440DBD Half Height Pull - Bolts Down 4,796 4,528 5,070
LP6440DBU Half Height Pull - Bolts Up 4,898 4,627 5,159
LP6440FHD Full Height Pull - Bolts Down 5,876 5,576 6,244
LP6440FHU Full Height Pull - Bolts Up 5,993 5,691 6,346
LP6440FHB Full Height Pull - Bolts Up and Down 6,273 5,963 6,588
GeoMetek - SquareLP7901DBD Half Height Pull - Bolts Down 1,642 1,333 1,426
LP7901DBU Half Height Pull - Bolts Up 1,749 1,436 1,537
LP7901FHD Full Height Pull - Bolts Down 1,859 1,542 1,650
LP7901FHU Full Height Pull - Bolts Up 1,982 1,664 1,779
LP7901FHB Full Height Pull - Bolts Up and Down 2,281 1,953 2,089
MegaTek Dummy Pull - RoundDP3301DBD Half Height Pull - Bolts Down 1,517 1,185 1,639 889 951
DP3301DBU Half Height Pull - Bolts Up 1,517 1,185 1,639 889 951
DP3301FHD Full Height Pull - Bolts Down 2,072 1,462 2,237 1,158 1,238
DP3301FHU Full Height Pull - Bolts Up 2,072 1,462 2,237 1,158 1,238
NeoTek with GripZone Dummy Pull - RoundDP3401DBD Half Height Pull - Bolts Down 1,625
DP3401DBU Half Height Pull - Bolts Up 1,625
DP3401FHD Full Height Pull - Bolts Down 2,193
DP3401FHU Full Height Pull - Bolts Up 2,193
GeoMetek Dummy Pull - SquareDP7901DBD Half Height Pull - Bolts Down 1,366 1,065 1,139
DP7901DBU Half Height Pull - Bolts Up 1,366 1,065 1,139
DP7901FHD Full Height Pull - Bolts Down 1,699 1,388 1,486
DP7901FHU Full Height Pull - Bolts Up 1,699 1,388 1,486
• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.
NOTE: Square Locking Pulls only available in US10BE, US32, and US32D.
Locking Door Pulls (con’t)
LOC
KIN
G D
OO
R P
ULL
SY
ST
EM
LP7901DBD
LP6
44
0 -
RM
85
1
Locking Door Pull Accessories
Door Pull Accessories
Part Description Stock PC / 10BE 28/628 32D/630 32/629
LPS01 Top Strike - 3⁄4" x 1 1⁄2" x 3" 44 41 74 82
LPS02 Top Strike - w/Rubber Stop - 3⁄4" x 2 1⁄2" x 3" 44 41 74 82
LPS03 Top Strike - Stainless Steel - .050" x 1 1⁄8" x 2 1⁄4" 44 34 38
LPS04 Transom Strike - 1 1⁄4"D x 4 1⁄2"H 142 101 112
LPS05 Transom Strike - 1 1⁄4"SQ x 4 1⁄2"H 165 116 131
LPS06 Mortised Header Strike 2" Dia. 166 117 132
LPS07 Top Inswinging Strike 184 172 193
LPS12 Top Strike - w/Adjustable Stops - 3⁄4" x 1 1⁄2" x 3" 126 90 101
Part Description 3/605 4/606 10/612 10B/613 10BE/BSP 15/619 26D/626 26/625
570 Dust Proof Strike 21.80 20.30 22.70 22.70 36.60 26.50 17.20 21.90
Part Description 3/6054/606
Stock PC10BE 10B/613 32D/630 32/629
DGBKIT Double Glazed Door Bushing Kit for Glass Doors 87 90 94 75 84
NOTE: Thumbturn design differs between the round and square verisons.
NOTE: If the 09 cylinder is specified, an add on charge will be applied.
Order form available for LPS07.
LPS01
570Part Description
3/6054/606
10/61210BL/614
Stock PC 10BE
26/62526D/626 32D/630
RM850 Floor Mounted Stop 1 1⁄2" Projection 27 28 41 20 32
RM851 Floor Mounted Stop 2 1⁄2" Projection 60 67 64 60 52
Part Description 3/6054/606
Stock PC10BE 32D/630
ADA (suffix) ADA Large Thumbturn - 1 13⁄16" Projection 45 43 42
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.62
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
FL3
30
1 -
PD
U8
50
0P
AN
IC D
EV
ICE
/ F
LA
T L
AT
CH
Locking Door Pull with Flat Latch
Part Description Stock PC / 10BE 32D/630 32/629
FL3301DBU Half Height Pull - Bolts Up 6,381 4,537 5,218
FL3301FHU Full Height Pull - Bolts Up 6,447 4,855 5,583
Horizontal Push/Pull Bar Option - Half Height - Bolts Up (DBU)
FL3301DBUBEPB Bent End Both Sides 6,697 4,819 5,534
FL3301DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 6,489 4,635 5,326
FL3301DBUBEPC Bent End Cylinder Side - Mating Side Vertical 6,489 4,635 5,326
FL3301DBUPMPB Post Mount Both Sides 6,828 4,936 5,665
FL3301DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 6,603 4,735 5,440
FL3301DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 6,603 4,735 5,440
Horizontal Push/Pull Bar Option - Full Height - Bolts Up (FHU)
FL3301FHUBEPT Bent End Thumbturn Side - Mating Side Vertical 6,555 4,953 5,691
FL3301FHUBEPC Bent End Cylinder Side - Mating Side Vertical 6,555 4,953 5,691
FL3301FHUPMPT Post Mount Thumbturn Side - Mating Side Vertical 6,669 5,053 5,805
FL3301FHUPMPC Post Mount Cylinder Side - Mating Side Vertical 6,669 5,053 5,805
PDU8500
PDU8500 PDU8500-1 PDU8500-2 PDU8500-3
PDU8500-4 PDU8500-5 PDU8500-6
Panic Device (for Storefront, Wood, and Metal doors)
Part Latches Mating Handle Shape Mating Handle Length Stock PC / 10BE 32D/630 32/629 32/32D
PDU8500 Up None None 5,828 4,971 5,717 5,815
PDU8500-1 Up L-Shape Full 7,416 6,326 7,275 7,402
PDU8500-2 Up L-Shape Half 7,240 6,176 7,102 7,224
PDU8500-3 Up Vertical Full 7,240 6,176 7,102 7,224
PDU8500-4 Up Vertical Half 6,681 5,700 6,554 6,669
PDU8500-5 Up Vertical Short 6,414 5,471 6,292 6,400
PDU8500-6 Up Horizontal Full 6,414 5,471 6,292 6,400
If Vertical CTC is > 70 7/8" or Horizontal CTC is > 33 3/4" there is a $360 add on price. Order Form available for
PDU8500 configurations.
• To meet California Building Code (2013) Sec.11B-309.4 there is a $111.00 add on price.
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 63
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
ST
RIK
ES
ES
K-S
GL-
24
D -
ES
-MS
-31
0-1
-1-3
/4-1
2D
-FS
Strikes
Panic Strike Kits (Strike, Shims, Cover) For Stiles 5" or greater, Wood and Hollow Metal Frames.
Part DescriptionKeeperLength Voltage Mode
Stock PC 10BE 32D/630 32/629
ESK-SGL-24D Single Door 3/4" 24V DC Fail Secure 1,286 1,088 1,252
ESK-DBL-24D Double Door 3/4" 24V DC Fail Secure 2,572 2,176 2,503
ESK-SGL-12D Single Door 3/4" 12V DC Fail Secure 1,286 1,088 1,252
ESK-DBL-12D Double Door 3/4" 12V DC Fail Secure 2,572 2,176 2,503
ESK-SGL-24D-FS Single Door 3/4" 24V DC Fail Safe 1,286 1,088 1,252
ESK-DBL-24D-FS Double Door 3/4" 24V DC Fail Safe 2,572 2,176 2,503
ESK-SGL-12D-FS Single Door 3/4" 12V DC Fail Safe 1,286 1,088 1,252
ESK-DBL-12D-FS Double Door 3/4" 12V DC Fail Safe 2,573 2,176 2,503
MSK-SGL Single Door 225 191 219
MSK-DBL Double Door 321 272 313
SL100 Security Latch AdapterSingle Manual Strike 2,402 2,089 2,402
Double Manual Strike 4,803 4,177 4,803
AC-Rectifier AC Converter for Electrc Strike 80
ES-SmartpacIII Power Controller 122
†LCBMA Door Monitioring 163
Medium Stile Panic Strike Kits (Strike, Adapter Plate, Cover) For stiles 3 ½" and less than 5".
ESK-MS-SGL-24D Single Door 3/4" 24V DC Fail Secure 1,479 1,251 1,440
ESK-MS-DBL-24D Double Door 3/4" 24V DC Fail Secure 2,958 2,502 2,878
ESK-MS-SGL-12D Single Door 3/4" 12V DC Fail Secure 1,479 1,251 1,440
ESK-MS-DBL-12D Double Door 3/4" 12V DC Fail Secure 2,958 2,502 2,878
ESK-MS-SGL-24D-FS Single Door 3/4" 24V DC Fail Safe 1,479 1,251 1,440
ESK-MS-DBL-24D-FS Double Door 3/4" 24V DC Fail Safe 2,958 2,502 2,878
ESK-MS-SGL-12D-FS Single Door 3/4" 12V DC Fail Safe 1,479 1,251 1,440
ESK-MS-DBL-12D-FS Double Door 3/4" 12V DC Fail Safe 2,958 2,502 2,878
MSK-MS-DBL Double Door 369 313 360
AC-Rectifier AC Converter for Electrc Strike 80
ES-SmartpacIII Power Controller 122
310-1 Electric Strikes Body Only
Part Description Keeper Length Voltage Mode Price
ES-310-1-3/4-24D Electric Strike 3/4" 24V DC Fail Secure 646
ES-310-1-3/4-12D Electric Strike 3/4" 12V DC Fail Secure 646
ES-310-1-3/4-24D-FS Electric Strike 3/4" 24V DC Fail Safe 646
ES-310-1-3/4-12D-FS Electric Strike 3/4" 12V DC Fail Safe 646
ES-MS-310-1-1-3/4-24D Medium Stile Double Electric Strike 3/4" 24V DC Fail Secure 1,292
ES-MS-310-1-1-3/4-12D Medium Stile Double Electric Strike 3/4" 12V DC Fail Secure 1,292
ES-MS-310-1-1-3/4-24D-FS Medium Stile Double Electric Strike 3/4" 24V DC Fail Safe 1,292
ES-MS-310-1-1-3/4-12D-FS Medium Stile Double Electric Strike 3/4" 12V DC Fail Safe 1,292
†Note: LCBMA is not available on 310-1-1 models or medium stiles.Note: Medium stiles are 3 1/2" - 5". Wide stiles are over 5".MSK-SGL will work on both wide and medium stiles.
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.64
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
AR
CH
ITE
CT
UR
AL
FIN
ISH
ES
Most of Rockwood’s products are available in all of the following architectural finishes. The catalog indicates exceptions.
This finish list is grouped by base metal.
Architectural Finishes
Base Metal DescriptionPrice Book Code
Rockwood Code
BHMA Code
Aluminum Satin 27 US27 627
Aluminum Clear Anodized 28 US28 628
Aluminum Light Bronze Anodized 311 311 —
AluminumMedium Bronze Anodized
312 312 —
Aluminum Dark Bronze Anodized 313 313 710
AluminumExtra Dark Bronze Anodized
314 314 —
Aluminum Black Anodized 315 315 711
Aluminum White Powder Coat WPC WPC —
Aluminum Red Powder Coat RPC RPC —
Aluminum Black Powder Coat BPC BPC —
Brass Polished Clear Coated 3 US3 605
Brass Polished No Coating 3NL US3NL —
Brass Satin Clear Coated 4 US4 606
Brass Satin Oxidized Relieved 5 US5 609
BrassSatin Nickel Plated Clear Coated
15 US15 619
BrassSatin Nickel Blackened Relieved Clear Coated
15A US15A 620
BrassFlat Black Powder Coated
19 US19 622
Brass Polished Chrome Plated 26 US26 625
Brass Satin Chrome Plated 26D US26D 626
Bronze* Polished Clear Coated 9 US9 611
Bronze* Satin Clear Coated 10 US10 612
Bronze*Satin Black Oxidized Oil Rubbed
10A US10A 722
Bronze*Satin Oxidized Oil Rubbed
10B US10B 613
Bronze*Satin Oxidized Clear Coated
10BL US10BL 614
Bronze*Dark Oxidized Statuary Clear Coated
20A US20A 624
Stainless Steel Polished 32 US32 629
Stainless Steel Satin 32D US32D 630
Special Finishes (see descriptions)
Stainless Steel Satin MicroShield® Coated 32DMS*** US32DMS*** —
Stainless Steel Polished 316 Alloy 32316*** US32316*** —
Stainless Steel Satin 316 Alloy 32D316*** US32D316*** —
Dark Oxidized Satin Bronze, Equivalent
10BE US10BE (613E)
Black Suede Powder Coat BSP BSP —
White Suede Powder Coat WSP WSP —
Wrought Black Powder Coat WB WB —
32DMS (MicroShield®): As part of its promise to provide
innovative solutions to their customers, ASSA ABLOY
Group companies offer the MicroShield® technology, a
silver-based antimicrobial coating designed to inhibit the
spread of germs and bacteria.
32316 and 32D316 are made from alloy 316 stainless
steel containing molybdenum and extra nickel giving it
substantially higher corrosion resistance than the standard
stainless steels typically used in door hardware. This finish
is ideal for use in coastal, urban, and industrial areas that
have harsh environmental conditions. 32316 (polish)
finishes offer the best corrosion resistance and should be
used in caustic environments.
10BE Dark Oxidized Satin Bronze equivalent: This finish
provides the richness and warmth of the 10B/613 "living"
finish, but maintains its original color and appearance and
will not fade or wear over time. The 10BE finish is offered
by Corbin Russwin, McKinney, Norton, Rixson, Rockwood,
SARGENT and Yale, providing visual consistency between
ASSA ABLOY Group brands.
* On most bronze finishes we will supply solid bronze
material. Where solid bronze material is not available,
we will use brass as a base material with a bronze look
powder coat in its place.
*** Available on select items as indicated by the finish icon
throughout the catalog.
Wood Finishes
Wood Species and Finishes are found on page 39.
Special Finishes Description
MicroShield® is a registered
trademark of Yale Security Inc.,
an ASSA ABLOY Group company.
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 65
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
MO
UN
TIN
G T
YP
ES
PULL STYLE PULL ON ONE SIDE OF DOOR PULL ON BOTH SIDES OF DOOR (BTB)
MOUNTING STYLE Thru Bolt Deco Thru Bolt Concealed Conehead/Set Screw Spanner Collar
DOOR TYPE Wood/Metal Glass Metal Metal Wood Wood/Metal Glass Wood/Metal Glass
CONEHEADS NA NA NA Single Single Single Single Single NA NA
MOUNTING TYPE Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14
Standard (STD) Bolt Size
1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20
Price INCL 28.59 33.78 8.49 13.39 11.12 8.49 15.65
Heavy Duty (HD) Bolt Size
5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18
Price 8.49 33.78 40.03 12.65 18.95 15.55 12.65 19.81
Extra Heavy Duty (XHD) Bolt Size
3⁄8"-16 3⁄8"-16 3⁄8"-16 3⁄8"-16 3⁄8"-16
Price 12.42 36.90 43.15 32.23 38.46
Straight Pulls
Pull Type Dia.
MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED
Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14
Straight 5⁄8" 8-32 STD STD 8-32 8-32 8-32 STD
Straight 3⁄4" HD HD HD STD STD STD STD
Straight 1" HD HD HD HD HD HD HD HD HD HD
Straight 1 1⁄4" HD HD HD HD HD HD HD HD HD HD
Straight 1 1⁄2" HD HD HD HD HD HD HD HD HD HD
Offset Pulls - Postmount
Pull Type Dia.
MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED
Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14
Offset 5⁄8" 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32
Offset 1" HD HD HD HD HD HD HD HD
Offset 1 1⁄4" HD HD HD HD HD HD HD HD
Offset 1 1⁄2" HD HD HD HD HD HD HD HD
Offset Pulls - Tubular Bent Ends
Pull Type Dia.
MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED
Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14
Offset 1" XHD XHD XHD HD HD HD XHD XHD
Offset 1 1⁄4" XHD XHD XHD HD HD HD XHD XHD
Offset 1 1⁄2" XHD XHD XHD HD HD HD XHD XHD
Mounting Types
For all bent 1 1/4" - 1 1/2" solid Aluminums pulls and bars us the following mountings: (1HD - 12HD -6HD -8HD - 5HD - 15HD - 13HD)
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.66
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
MO
UN
TIN
G D
ET
AIL
S
Door Pull Mounting Details
Free End
Thru Bolt
TYPE 1 - Thru BoltWood or Metal Door
Pull
Outside Flat HeadMachine Screw
Inside
FinishWasher
Type Bolt Size Drill Size Price1/4"-20
5/16"-183/8"-16
9/32
11/32
13/32
1
1HD
1XHD
Incl.
8.49
12.42
Type Bolt Size Drill Size Price1/4"-20
5/16"-183/8"-16
9/32
11/32
13/32
12
12HD
12XHD
28.59
33.78
36.90
TYPE 12 - Decorative Thru BoltWood or Metal Door
Pull
Thru Bolt
Type Bolt Size Drill Size Price1/4"-20
5/16"-183/8"-16
15
15HD
15XHD
33.78
40.03
43.15
TYPE 15 - Decorative Thru BoltGlass Door
PullThru Bolt
NeopreneBushing5/8" Dia. Hole
Plastic Washers
5/8
5/8
5/8
Free End
Concealed
Type Bolt Size Drill Size Price1/4"-205/16"-18
1/4-20 Tap5/16-18 Tap
6
6HD
8.49
12.65
TYPE 6 - Surface ConcealedMetal Door
Minimum diameter of pull is 5/8"
Pull
Reinforcement by others
Cone HeadMachine Screw
SetScrew
For doors with
rivnuts specify
Type 6R
Type Bolt Size Drill Size Price1/4"-20
5/16"-18
N/A
N/A
6
6HD
13.39
18.95
TYPE 6R - Surface ConcealedMetal Door
Minimum diameter of pull is 1"
Pull
Rivnut
SetScrew
Cone HeadMachine Screw
Type Bolt Size Drill Size Price1/4"-20
5/16"-18
23/64 - 9/16 dp.7/16 - 9/16 dp.
8
8HD
11.12
15.55
TYPE 8 - Surface ConcealedWood Door
Pull
1/4"-20Set Screw
Cone HeadMachine Screw
KnifeThreadInsert
Type Bolt Size Drill Size Price1/4"-20
5/16"-18
5/8
5/8
13
13HD
15.65
19.81
TYPE 13 - Back-to-BackGlass Door
Washer
Pull
PlasticWashers
Pull
NeopreneBushing5/8" Dia. Hole
SetScrew
OutsideInside
Cone HeadMachine Screw
TYPE 11XHD - Back-to-Backw/Spanner Collar - Wood or Metal Door
SpannerCollar
Pull
RH Thread
Pull
Minimum diameter of pull is 1"
OutsideInside
Type Bolt Size Drill Size Price3/8"-16 13/3211XHD 32.23
Type Bolt Size Drill Size Price1/4"-20
5/16"-18
9/32
11/32
5
5HD
8.49
12.65
TYPE 5 - Back-to-BackWood or Metal Door
PullPull
SetScrew
Minimum diameter of pull is 5/8"
OutsideInside
Cone HeadMachine Screw
RM4800 Series - Thru BoltWood or Metal Door
Screw Post
Pull
Bolt Size Drill Size3/8"-16
Price
42.335/8
RM4800 Series - Back-to-BackWood or Metal Door
Pull
Screw Post
Pull
Bolt Size Drill Size3/8"-16
Price
42.335/8
TYPE 14XHD - Back-to-BackGlass Door
Minimum diameter of pull is 1"
Spanner Collar
Pull
RH/LH ThreadFeltWashers
Pull
NeopreneBushing5/8" Dia. Hole
Type Bolt Size Drill Size Price3/8"-16 5/814XHD 38.46
Back-to-Back
RM4800
Mounting
Only
RM790 x
RM790 BTB
Mounting
Only
HD mountings feature 2 set screws 180° apart.
Flat HeadMachineScrew
Flat HeadMachineScrew
Sleeve
PullPull
TYPE 10 - Surface MountedWood or Metal Door
Type Bolt Size Drill Size Price#8-32 9/3210 15.55
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 67
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
PU
SH
AN
D P
ULL
BA
R M
OU
NT
ING
DE
TA
ILS
Push and Pull Bar Mounting Details
Sizing of Push Bars
Flush DoorsDoor width: • minus 5" for bent end bars
• minus 5" for flat end post mount bars • minus 7" for round end post mount bars
Stile and Rail Doors or Doors with LitesDoor width: • minus width of one stile
CAUTION: Always confirm bars will not interfere with jamb or cause pinching hazard.
CAUTION: On narrow stile doors, be sure push bar base fits on the stile and bar does not interfere with the stop.
Handing of Doors
The handing of a door is determined from the outside of the opening.
Standing outside the door:
• If the hinges are on the right, it is a right hand door.
• If the hinges are on the left, it is a left hand door.
• If the door opens away from you, it is a regular bevel door.
• If the door opens toward you, it is a reverse bevel door.
CL CL
CL
Push Bar
Finished Floor
42"
Recommended
Mounting
Location
Left Hand Right Hand
Inside
Outside
Inside
Outside
Left Hand
Reverse Bevel
Right Hand
Reverse Bevel
Free End
Free
End
Common End
Common End
47 Bar
Typical Mounting
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.68
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
FAS
TE
NE
RS
- S
PA
RE
PA
RT
SS
P1
00
4 -
SP
10
79
Part Description Mounting Type Price
SP1004 1⁄4 "-20 x 2 1⁄4 " Flat Head Machine Screw Thru Bolt 1 1.26
SP1005 1⁄4 "-20 Finishing Washer 1 0.89
SP10535⁄16 "-18 x 2 1⁄2" Socket Flat Head Machine Screw
Thru Bolt1HD 3.43
SP1054 5⁄16 "-18 Finishing Washer 1HD 1.27
SP10013⁄8 "-16 x 2 1⁄2" Socket Flat Head Machine Screw
Thru Bolt1XHD 5.31
SP1002 3⁄8 "-16 Finishing Washer 1XHD 1.59
SP10031" Diameter Decorative Thru Bolt 1⁄4 "-20 x 2 1⁄4 "
12 14.37
SP10551" Diameter Decorative Thru Bolt 5⁄16 "-18 x 2 1⁄4 "
12HD 17.12
SP10411 1⁄4 " Diameter Decorative Thru Bolt3⁄8 "-16 x 2 1⁄4 "
12XHD 17.12
Thru Bolt Mounting - for 1 3⁄4" Wood and Metal Doors
Part Description Mounting Type Price
SP1025 1⁄4 "-20 x 2 1⁄4 " Cone Head Machine Screw 5 3.73
SP1056 5⁄16 "-18 x 2 1⁄4 " Cone Head Machine Screw 5HD 5.90
SP10521⁄4 "-20 x 2 1⁄4 " Double Cone Head Machine Screw
(for use with offset pulls)16 4.42
SP10575⁄16 "-18 x 2 1⁄4 " Double Cone Head Machine Screw
(for use with offset pulls)16HD 7.26
SP10271⁄4 "-20 Cone Head Union (Used to Convert Cone
Head to Thru Bolt Hole)N/A 3.73
SP10791⁄4 "-20 Double Cone Head Union (Used to
Convert Double Cone Head to Thru Bolt Hole)N/A 6.58
SP10685⁄16 "-18 Cone Head Union (Used to Convert Cone
Head to Thru Bolt Hole)N/A 5.90
SP1026 1⁄4 "-20 x 5⁄16 " Set Screws (Standard) N/A 0.89
SP1065 1⁄4 "-20 x 3⁄16" Set Screw (Short) N/A 1.16
SP1032 3⁄8"-16 x 3 1⁄2" LH/RH Bolt 11 7.79
SP1071 Spanner Collar 1" Diameter for LH/RH Bolt 11 11.78
SP1033 Spanner Collar 1 1⁄4 " Diameter for LH/RH Bolt 11 11.78
SP1072 Spanner Collar 1 1⁄2" Diameter for LH/RH Bolt 11 13.11
Back to Back Mounting - for 1 3⁄4" Wood and Metal Doors
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 69
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
FAS
TE
NE
RS
- S
PA
RE
PA
RT
SS
P1
02
0 -
SP
10
82
Part Description Mounting Type Price
SP1039 1⁄4 "-20 x 1⁄2" Cone Head Machine Screw 6 / 6R 3.73
SP1058 5⁄16 "-18 x 1⁄2" Cone Head Machine Screw 6HD 5.90
SP1080 1⁄4 "-20 Cone Head / Knife Thread Insert 8 6.21
SP1082 5⁄16 "-18 Cone Head / Knife Thread Insert 8HD 6.21
SP1051 1⁄4 "-20 x 1⁄2" Double Cone Head Machine Screw 17 / 17R 5.90
SP1059 5⁄16 "-18 x 1⁄2" Double Cone Head Machine Screw 17HD 7.26
Concealed Mounting - for 1 3⁄4" Wood and Metal Doors
Part Description Mounting Type Price
SP1022Stainless Steel Washer for 1⁄4 "-20 Cone Head Machine
Screw .032" Thick13 1.59
SP1060Stainless Steel Washer for 5⁄16 "-18 Cone Head Machine
Screw .060" Thick13HD 1.59
SP1023 Plastic Washer for 1⁄4 "-20 Bolt; Specify Size 13 1.37
SP1061 Plastic Washer for 5⁄16 "-18 Bolt; Specify Size 13HD 1.47
SP1062 Plastic Washer for 3⁄8 "-16 Bolt; Specify Size 14 1.47
SP1024 Glass Door Bushing for 5⁄8" Hole in Glass; Specify Size 13 / 13HD / 14 1.59
Bushings & Washers - for 1⁄2" Glass Doors
Part Description Mounting Type Price
SP1020 1" Diameter Decorative Thru Bolt; 1⁄4 "-20 x 1 1⁄8" 15 14.37
SP1063 1" Diameter Decorative Thru Bolt; 5⁄16"-18 x 1 1⁄8" 15HD 17.12
SP1040 1 1⁄4 " Diameter Decorative Thru Bolt; 3⁄8 "-16 x 1 1⁄8" 15XHD 17.12
Thru Bolt Mounting - for 1⁄2" Glass Doors
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.70
ROCKWOOD
USA & Canada Prices Effective May 1, 2021
USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca
SP
10
06
- S
P1
07
7FA
ST
EN
ER
S -
SP
AR
E P
AR
TS
Part Description Mounting Type Price
SP1021 1⁄4 "-20 x 1 1⁄8" Cone Head Machine Screw 13 3.73
SP1064 5⁄16 "-18 x 1 1⁄8" Cone Head Machine Screw 13HD 5.90
SP1067 1⁄4 "-20 x 1 1⁄8" Double Cone Head Machine Screw 18 5.90
SP1066 5⁄16 "-18 x 1 1⁄8" Double Cone Head Machine Screw 18HD 7.26
SP1026 1⁄4 "-20 x 5⁄16" Set Screw (Standard) N/A 0.89
SP1065 1⁄4 "-20 x 3⁄16" Set Screw (Short) N/A 1.16
SP10313⁄8"-16 x 1 3⁄4" LH/RH Bolt (If SP1031 is ordered
and KIT 14 is not called out fastener will be 2 1/4")14 7.79
SP1071 Spanner Collar 1" Diameter for LH/RH Bolt 14 11.78
SP1033 Spanner Collar 1 1⁄4" Diameter for LH/RH Bolt 14 11.78
SP1072 Spanner Collar 1 1⁄2" Diameter for LH/RH Bolt 14 13.11
Back to Back Mounting - for 1⁄2" Glass Doors
Part Description For Use With Price
SP1073 1⁄8" Thick x 1 1⁄16" Diameter 3⁄4" Diameter Pulls 14.37
SP1074 1⁄8" Thick x 1 1⁄4" Diameter1" Diameter Pulls
and Posts14.37
SP1075 1⁄8" Thick x 1 1⁄2" Diameter1" Diameter Pulls
and Posts14.37
SP1076 1⁄8" Thick x 1 3⁄4" Diameter1" Diameter Pulls
and Posts14.37
SP1077 1⁄8" Thick x 2" Diameter1" Diameter Pulls
and Posts14.37
Y Base PlatesSpecify bolt hole size and finish. Standard pulls require two plates.
Part Description Door Type Price
SP1006 #8 x 3⁄4" Oval Head Sheet Metal Screw Wood or Metal 0.68
SP1007 #8-32 x 3⁄4" Oval Head Machine Screw Metal 0.68
SP1034 #8-32 x 1 5⁄8" Brass Sleeve Machine Screw Wood or Metal 3.96
Flush Pull Fasteners
ROCKWOOD
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 71
USA & Canada Prices Effective May 1, 2021
Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us
Canada: 800-461-3007 | www.assaabloydss.ca
MO
UN
TIN
G K
ITS
KIT
1 -
KIT
RM
38
0G
Standard Thru Bolt for
Countersunk Holes
Decorative Thru Bolt for
Wood or Metal Doors
Cone Head Bolt for Back-to-Back
Wood or Metal Doors
LH/RH Bolt without Heads
LengthLengthLengthLength
PartMounting
Type Description Price
KIT1 12 ea. 1⁄4 "-20 x 2 1⁄4" Thru Bolts and 2 ea. Finish Washers; Specify Finish 4.25
KIT1HD 1HD2 ea. 5⁄16 "-18 x 2 1⁄2" Thru Bolts and 2 ea. Finish Washers; Specify Finish 8.49
KIT1XHD 1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru Bolts and 2 ea. Finish Washers; Specify Finish 12.42
KIT5 52 ea. 1⁄4 "-20 x 2 1⁄4" Cone Head Bolts and 4 ea. Set Screws 8.49
KIT5HD 5HD2 ea. 5⁄16 "-18 x 2 1⁄4" Cone Head Bolts and 4 ea. Set Screws 12.65
KIT6 62 ea. 1⁄4 "-20 x 1⁄2" Cone Head Bolts and 4 ea. Set Screws 8.49
KIT6HD 6HD2 ea. 5⁄16 "-18 x 1⁄2" Cone Head Bolts and 4 ea. Set Screws 12.65
KIT11 112 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt and 2 ea. Spanner Collars for 1 3⁄4" Doors; Specify Pull Diameter and Finish
32.23
KIT12-1 122 ea. 1⁄4 "-20 x 2 1⁄4" Decorative Thru Bolts; 1" Dia.; Specify Finish 28.59
KIT12-1HD
12HD2 ea. 5⁄16 "-18 x 2 1⁄4" Decorative Thru Bolts; 1" Dia.; Specify Finish 33.78
KIT12-1.25XHD
12XHD2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts; 1 1⁄4" Dia.; Specify Finish
36.90
KIT13 13
2 ea. 1⁄4 -20 x 1 1⁄8" Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; 4 ea. Set Screws; Specify if other than 1⁄2" Glass
15.65
KIT13HD 13HD
2 ea. 5⁄16 "-18 x 1 1⁄8" Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; 4 ea. Set Screws; Specify if other than 1⁄2" Glass
19.81
KIT14 142 ea. 3⁄8 "-16 x 2 1⁄4" LH/RH Bolt; 2 ea. Spanner Collars; 2 ea. Bushings; 4 ea. Washers for 1⁄2" Glass Doors; Specify Pull Diameter and Finish
38.46
KIT15 152 ea. 1⁄4 "-20 x 1 1⁄8" Decorative Thru Bolts; 1" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size
33.78
KIT15HD 15HD2 ea. 5⁄16 -18 x 1 1⁄8" Decorative Thru Bolts; 1" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size
40.03
KIT15-1.25XHD
15XHD2 ea. 3⁄8 -16 x 11⁄8" Decorative Thru Bolts; 1 1⁄4" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size
43.15
KIT15-1.5XHD
15XHD2 ea. 3⁄8 "-16 x 1 1⁄8" Decorative Thru Bolts; 1 1⁄2" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size
49.37
KIT16 162 ea. 1⁄4 "-20 x 2 1⁄4" Double Cone Head Bolts and 4 ea. Set Screws
12.65
KIT16HD 16HD2 ea. 5⁄16 "-18 x 2 1⁄4" Double Cone Head Bolts and 4 ea. Set Screws 15.65
PartMounting
Type Description Price
KIT17 172 ea. 1⁄4 "-20 x 1⁄2" Double Cone Head Bolts and 4 ea. Set Screws 12.65
KIT17HD 17HD2 ea. 5⁄16 "-18 x 1⁄2" Double Cone Head Bolts and 4 ea. Set Screws 15.65
KIT18 18
2 ea. 1⁄4 "-20 x 1 1⁄8" Double Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; Specify if other than 1⁄2" Glass and 4 ea. Set Screws
21.67
KIT18HD 18HD
2 ea. 5⁄16 "-18 x 1 1⁄8" Double Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; Specify if other than 1⁄2" Glass and 4 ea. Set Screws
24.78
KIT-T1 T1
1 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 1 ea. 1⁄4 "-20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4 "-20 x 2 1⁄4" — 1" Dia. Decorative Thru Bolts; Specify Finish
36.89
KIT-T2 T2
1 ea. 1⁄4 "-20 X 1 1⁄8" Cone Head Bolt; 1 ea. 1⁄4 "-20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4 "-20 x 1 1⁄8" — 1" Dia. Decorative Thru Bolts; 1 ea. Metal Washer; 6 ea. Plastic Washers; 3 ea. Bushings; Specify Finish
46.26
KIT-T3 T3
1 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 1 ea. 1⁄"4 -20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4"-20 x 2 1⁄4" Thru Bolts; 2 ea. Finish Washers; Specify Finish
12.63
KIT-T4 T41 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 2 ea. 1⁄4 "-20 x 1⁄2" Cone Head Bolts; 3 ea. Set Screws
12.63
KIT-T5 T51 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 2 ea. 1⁄4 "-20 x 1⁄2" Cone Head Wood Screws; 3 ea. Set Screws
12.63
KITRM1.25 11x1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru-Bolts; 2 ea. Finish Washers; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; Specify Finish
28.59
KITRM36011x
12XHD
2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄4" Dia.; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; Specify Finish
53.01
KITRM360G14x
15XHD
2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄4" Dia.; 1 ea. 3⁄8 "-16 x 2 1⁄4" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; 3 ea. Bushings; 6 ea. Plastic Washers; Specify Finish
62.38
KITRM1.5 11x1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru Bolts; 2 ea. Finish Washers; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; Specify Finish
31.70
KITRM38011x
12XHD
2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄2" Dia.; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; Specify Finish
62.38
KITRM380G14x
15XHD
2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄2" Dia.; 1 ea. 3⁄8 "-16 x 1 1⁄4" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; 3 ea. Bushings; 6 ea. Plastic Washers; Specify Finish
71.73
Mounting Kits for Door Pulls
Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 30006A 3/21
(In Canada)
Door Security Solutions Canada
160 Four Valley Drive
Vaughan, ON L4K 4T9
P: 800-461-3007
www.assaabloydss.ca
The ASSA ABLOY Group is the global leader
in access solutions. Every day we help
people feel safe, secure and experience
a more open world.
ASSA ABLOY Opening Solutions
Architectural Accessories Group
Rockwood, PA
P: 800-458-2424 • F: 800-922-9212
www.assaabloydooraccessories.us