Post on 21-Jan-2018
Altivar Machine ATV320 briefing
Property of Schneider Electric
Simply reliable. Simply available.
December 2017
• Introduction: Altivar 320
Presentation
Dialog and configuration tools
Accessories
Application examples
• Where to find further details
• Quiz
Table of content
Page 2Property of Schneider Electric |
Altivar Machine ATV320 — for compact application systems
Page 3Property of Schneider Electric |
ATV320 compact
ATV320 book
The range
• Two form factors to fit practically any machine layout and
reduce machine footprint
‒ Book format (min 45 mm, up to 4 kW)
240 V (1 phase up to 2.2 kW) and up to 500 V (3 phases)
‒ Compact format
240 V (1 phase up to 2.2 kW) and up to 600 V (3 phases)
• IP21
Communication options
Altivar Machine ATV320 — for compact application systems
Page 4Property of Schneider Electric |
AltivarTM
process keypad
Altivar 71
graphic keypad
Customer
value
• Friendly: Intuitive programming and menus with jog dial
• Efficient: Very compact, performing motor control,
synchronous motor control
• Ready to use: 150 application functionalities
• Open: SoMoveTM software, ATV Logic, Modbus –
CANopen® embedded, Profibus®, DeviceNetTM options
• Robust: 50 °C, side by side without de-rating,
coated boards, long-lifetime components
• Comprehensive safety: Five built-in safety functions
Optimized installations thanks to flexibility in mountingReduce the size of the cabinet
Page 5Property of Schneider Electric |
DC bus
Daisy chain
Flat cabinet and MCC Side by side Motor circuit breaker
TeSysTM GV2 association
1. 4-digit display
• Drive states, error codes, parameter values
2. Navigation button
• Menus, modify values, change motor speed in local mode
3. Remote graphic display terminal (option)
4. Remote display terminal (option)
5. Multiloader tool (see details next slide)
• Enabling the configurations from a PC or drive to be copied and
duplicated on another drive
6. Simple loader tool (see details next slide)
• Enabling the configuration from one powered-up drive
to be duplicated on another powered-up drive
A wide range of dialog and configuration tools
Page 6Property of Schneider Electric |
• Multiloader … productivity booster
‒ Click and configure the drive power off
‒ Stock all your configuration in SD card
‒ No need to use a PC with SoMove to the drive
‒ And more functions
• Simple loader … duplicate in a click
‒ Configure the drive power on
‒ The “copy/paste” tool
Multi- and simple loader
Page 7Property of Schneider Electric |
Activation of the SLS safety function
This function prevents the motor from exceeding the specified
speed limit. If the motor speed exceeds the specified speed
limit value, safety function STO is triggered.
Activation of the STO safety function
This function brings the machine safety into a no-torque state
and/or prevents it from starting accidentally.
Five built-in safety functions – 1/3
Page 8Property of Schneider Electric |
STO: Safe Torque Off SLS: Safety Limited Speed
Activation of the SMS safety function
This function prevents the speed of the motor from exceeding
the predefined speed limit.
• 2 different speed limits can be defined and can be selected
by logic inputs
• If the motor speed exceeds the predefined speed limit
value, safety function STO is triggered
Activation of the SS1 safety function
This function monitors the deceleration according
to a dedicated deceleration ramp and safely shuts
off the torque once standstill has been achieved.
Five built-in safety functions – 2/3
Page 9Property of Schneider Electric |
SS1: Safe Stop Category 1 SMS: Safe Maximum Speed
Activation of the GDL safety function (ex. of stop type SS1)
• This function allows you to release the guard door lock after specified delay when the motor power is turned off. The specified
delay is chosen according to the type of stop
• The front door of the machine can be opened only after the motor is stopped. This function helps to ensure the safety of the
machine operator
Five built-in safety functions – 3/3
Page 10Property of Schneider Electric |
GDL: Guard Door Locking
Accessories
Page 11Property of Schneider Electric |
Motor chokes Additional input
EMC filters
Optional 90° bracketBraking resistors IP20
and IP67
Line chokes
Reliable accuracy across a spectrum of simple and
advanced multiaxes machine application requirements
• Control of three-phase synchronous
and asynchronous motors
• Machines from 0.18 to 15 kW
(0.25 to 20 Hp)
• Supports 240 V single-phased and
480 V three-phased power supply voltages
Application flexibility
Page 12Property of Schneider Electric |
Material
handling
Packaging Textile
HoistingMechanical
actuators
Material
working
• Click here to find info on SE.com
• Click here to find Altivar 320 on
SE.com
• Click here to access our Digicat
• Click here to access to CAD files
• Click on the link below for FAQs
(frequently asked question)
Where to find details
Page 13Property of Schneider Electric |
Property of Schneider Electric |
Quiz
Based on what
you’ve learned so
far, try to answer to
this quiz
?
Page 14
Is ATV320 available in book format?
Q1
Is ATV320 providing 50 application functionalities?
Q2
Witch networks are embedded for ATV320?
Q3
Witch network option are available for ATV320?
Q4
How many built-in safety functions are there for ATV320?
Q5
Property of Schneider Electric |
Quiz answers
Is ATV320 available in book format?
Q1 Yes, it’s available in book and compact format
Page 15
Answers
Is ATV320 providing 50 application functionalities?
Q2 No, it provides 150 application functionalities
Witch networks are embedded for ATV320?
Q3 Modbus and CANopen are embedded for ATV320
Witch network option are available for ATV320?
Q4 Profibus and DeviceNet
How many built-in safety functions are there for ATV320?
Q4 There are 5 built-in safety functions
Thank you
Page 16Property of Schneider Electric |