Post on 13-Feb-2016
description
ADVANTAGES
• Rated to 20,000+ psi (1,400+ bar)
• Tested to 30,000 psi
• Auto-adjusting ZDV connection
• Intended for many repeat uses
• No more cut-off and replacement of swaged ferrules
PEEK:Proven sealing abilitybeyond 20,000 psi (1,400 bar).
Titanium:Enables the swage to be released and reset.Intended for many repeat connections.
titanium hybrid ferrule
The Foundation of the EXP Family
Patents Pending
HAND-TIGHThand-tight to 8,700+ psiwrench-tight to 20,000+ psi
ADVANTAGES
• Connects between any 10-32 or 6-40 port
• 1/16 and 1/32 options available • Rated to 20,000+ psi (1,400+ bar)
• Tested to 30,000 psi
• Auto-adjusting ZDV connection
• Intended for many repeat uses
• No more cut-off and replacement of swaged ferrules
Patents Pending
fitting system
HEX HEADrated to 20,000+ psi
stem filter
ADVANTAGES
• Approved for use at 20,000+ psi (1,400+ bar) • Hand-tight and wrench-tight configuration • Reusable holder intended for many repeat uses • Auto-adjusting ZDV connections • Low-dispersion cartridges • Custom volumes/porosities available • Ultra-low .27 µL total swept volume
Patents Pending
ADVANTAGES
• Approved for use at 20,000+ psi (1,400+ bar) • Hand-tight filter replacement - NO TOOLS! • Depth filtration maximizes capacity • Auto-adjusting ZDV column connection • Custom volumes/porosities available • Low-volume, low-dispersion cartridges • Hardened stainless steel end cap eliminates galling
• 1.4 µL total swept volume
pre-column filter
Patents Pending
stem traps
EXP stem holder EXP fittingdisposable stems
EXP Stem Trap Kit
ADVANTAGES
• Hand-tight and wrench-tight configurations • Intended for many repeat uses • Auto-adjusting ZDV connection • Rated to 20,000 psi • Many chemistries available including custom packing • Available in bed volumes from 0.17ul to 2.6ul
• Low volumePatents Pending
EXP in-line holder
ADVANTAGES
• Hand-tight trap replacement - NO TOOLS!
• Rated to 20,000+ psi (1,400+ bar)
• Uni-directional cartridge
• Auto-adjusting ZDV connections
• Custom packing available
• Bed volumes from 4 µL to 100 µL
• Hardened stainless steel end cap eliminates galling
EXP direct connect holder
trap columns
Patents Pending
ADVANTAGES
• Hand-tight guard replacement - NO TOOLS! • Hardware rated to 20,000+ psi (1,400+ bar) • Packed guard rated for routine use to 15,000 psi (1,000 bar)
• 1.4 μL Swept Volume (excluding packed bed)
• Hardened stainless steel end cap eliminates galling
• Low-volume, low-dispersion cartridges
• Auto-adjusting ZDV column connection
• Custom packing available
guard columns
Patents Pending