Post on 05-Nov-2020
Outer tube 1(RIMT-RIHT)
Nested setIns/semi-con/str-cnt
3
3
3
2
10 10Stress Control Mastic(CPT085)
XLPE Insulation
Torque shearconnector Copper
tape screen
Semi ConductiveScreen
Oil BarrierTube(TWB)
3
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
cable 1Breakout boot
Semi-conductivetube (RCBT)
Semi-conductivebreakout boot(CCBR)
10 10
Outer tube 2(RIMT-RIHT)
Outer Sheath
PILCInsulation
Lead Sheath
ArmouringArmouring
Outer Sheath
1
1
2
2
3
3
4
4
RIMT/RIHT
RIMT/RIHT
RIMT/RIHT
XXXXX XXXXXXX XXXXX
XXXXX XXXXXXX XXXXX XXXXX XXXXXXX XXXXXName:
Date:
3-Core
The JOINTMASTER - REPL joint has been designed to incorporate clean and easy installation, requiring minimal
Joints are available for 7,2 - 36kV, 3 - core and 1 - core transition jointing of PILC and XlPE cables.
All JOINTMASTER Transition cable joints have been independently tested by recognized accredited test
1st Outer tube (RIMT-RIHT)
Second Red insulatingtube (RIRT)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Stress reliefmastic(CPT085)
Stress controltube (RSCT)
RSCT
Dual wall tube (RDWT)
Lead sheath
ArmouringArmouring
Outersheath
Outersheath
Innerbedding
Copper tapescreen
First red insulatingtube (RIRT)
cable 1
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
RSCT
1-CoreTransition Joints 12-36kV
product ranges for use in the construction of underground distribution networks.
Underground cable networks need to guarantee uninterrupted electricity supply, in order to achieve this
Range mm² Core Range mm² Core
25-70 3 25-70 3
50-120 3 50-120 3
95-185 3 95-185 3
185-300 3 185-300 3
Range mm² Core Range mm² Core
25-70 3 25-70 3
50-120 3 50-120 3
95-185 3 95-185 3
185-300 3 185-300 3
Range mm² Core Range mm² Core
NQ NQ
50-120 3 50-120 3
95-185 3 95-185 3
185-300 3 185-300 3
Single core and Trifurcating Transition Joints are available upon request. Not listed due size
requirement from customer.
12 -36kV 3 CORE XLPE TO PILC HEAT SHRINK TRANSITION JOINT KITS.
Transition Joint kits are available in 3 core XLPE TO PILC. These kits are also available
without or with Ferrules depending on the customers need. Although JOINTMASTER
prefer the Mechanical Torque shear type all Joint kits can also accommodate Crimp
Ferrules. Note that for Copper to Aluminium a Bi Metal Ferrule must be used.
12kv PILC 3 core NO Ferrules 12kv PILC 3 core Ferrules INCLUDED
Product Code Product Code
RHJ12/3XP1 NRHJ12/3XP1
RHJ12/3XP2 NRHJ12/3XP2
RHJ12/3XP3 NRHJ12/3XP3
RHJ12/3XP4 NRHJ12/3XP4
24kv PILC 3 core NO Ferrules 24kv PILC 3 core Ferrules INCLUDED
Product Code Product Code
RHJ24/3XP1 NRHJ24/3XP1
RHJ24/3XP2 NRHJ24/3XP2
RHJ24/3XP3 NRHJ24/3XP3
RHJ24/3XP4 NRHJ24/3XP4
36kv PILC 3 core NO Ferrules 36kv PILC 3 core Ferrules INCLUDED
Product Code Product Code
RHJ36/3XP4 NRHJ36/3XP4
RHJ36/3XP1 NRHJ36/3XP1
RHJ36/3XP2 NRHJ36/3XP2
RHJ36/3XP3 NRHJ36/3XP3
st1 RIMT/RIHT