Post on 03-Jun-2018
8/12/2019 773_3 Distrib_sales Intro Final
1/11
Fluke-772 and 773 mA Process Clamp Meters 1
In t rod uc ing the new :Fluke 772 and Fluke 773Milliamp Process Clamp Meters
8/12/2019 773_3 Distrib_sales Intro Final
2/11
Fluke-772 and 773 mA Process Clamp Meters 2
You Win A gain!With the New Fluke 772/773 Milliamp Clamp Meters
Remember your success with the: 771 mA Clamp Meter 78X Process Meters
Customers loved these products. Sales exceeded everyones expectations!
You can do it again with the 772 and 773! Customers have been asking for them and theyll be
easy to sell. Just: Upgrade current 771 customers and/or target new prospects in the
broad audience base for these products. Keep doing what youre already doing except now you have an
even better pitch
These products are money in your pocket you winagain with the new 772 and 773, and customers still
dont need to break the loop.
8/12/2019 773_3 Distrib_sales Intro Final
3/11
Fluke-772 and 773 mA Process Clamp Meters 3
772/773 featu res
Measure mA signals without breakingthe loop just like the Fluke-771
Source and simulate mA signals Power loops with 24V loop supply and
measure in circuit mA signals Source 0 to 10V to test devices with 1-
5V or 0 to 10V inputs (773 only) Measure DCV for 1-5, 0 to 10 or 24V
loop troubleshooting (773 only) Advanced 4 to 20 mA troubleshooting
features (773 only)
Save M or e Time!
8/12/2019 773_3 Distrib_sales Intro Final
4/11
Fluke 772 and 773 mA Process Clamp Meters 4
Fluke 770 Series of milliamp loop troubleshooting tools
Fluke-771 Fluke-772 Fluke-773
FeaturesMeasure 4 to 20
mA signals withoutbreaking the loop
Find defective 4 to20 mA signals andtroubleshoot with
mA source/simulate
Find bad mA loops,troubleshoot with
mA source/simulateDCV Source and
measure, advanceddiagnostic features
Applications
mA measure, jaw X X X Find problems with 4 to 20 mA signals withoutbreaking the loop.mA measure, incircuit X X
Verify errors found in measured mA signals within-line measurements
Loop power X XPower a transmitter and measure mA signal.
Substitution testing of installed 24V loop powersupply
mAsource/simulate X X
Test suspected bad 4 to 20 mA automation andcontrol I/O. Source signals to troubleshoot I/Ps
and valves
DCV measure XTest suspect 24V loop power supplies. Verify
1 to 5 V and 0 to 10 V automation signals
DCV source XSource 1 to 5 V and 0 to 10 V signals to testsuspected I/O, chart recorders, other voltage
input devices
mA scaled output X Log non-contact measured mA signals with aseparate logging tool such as a 289 DMM or DPC
mA in / out XSource 4 to 20 mA signals into valves and mA
signal conditioners and simultaneously measure4 to 20 mA positioning output signals.
8/12/2019 773_3 Distrib_sales Intro Final
5/11
Fluke-772 and 773 mA Process Clamp Meters 5
771, 772 and 773Core Features & Benefits
Product Category /Major Features General Benefits Customer Benefit Value to Customer
Measure mA signals for PLCand control system
analog I/O without breakingthe loop.
Measures low level dc currentCorrelate process indication
with real physical value
Saves process downtime -saves money for a utomation
professionals
Measure output signals from
transmitters without breakingthe loop
Maintain and troubleshoot
process and a utomationequipment without breaking
the loop
No disruption to the processSaves process downtime -
saves money forinstrumentation professionals
Detachable clamp wi thextension cable
Measurementsin tight locations
Enables measurements indifficult situations
Measurements can be carriedout more quickly
Dual backlit display with bothmA measurement
and percent of 4 to 20 mA span
Clear measurementpresentation
Allows quick measurementevaluation
Saves time, saves money
Measurement Spotlight illuminates hard to see wires indark enclosures
Measurement process is easierand quicker
Saves time, delight factor
Measure up to 99.9 mA rangenon-contact
Wide range of measurementsMeasures 10 to 50 mA signals
in older control systemsOnly one instrument needed
for multiple applications
Automatic power offAfter 15 minutes and 2 minuteautomatic off for backlight and
spotlightSaves battery life Saves money on batteries
8/12/2019 773_3 Distrib_sales Intro Final
6/11
Fluke-772 and 773 mA Process Clamp Meters 6
Unique to 772 and 773Extended Features & Benefits
Product Category /Major Features General Benefits Customer Benefit Value to Customer
Source, simulate and measuremA signals in circuit (break the
loop) (772 and 773)
Confirm non-contactmeasurement. Have the next
tool in hand fortroubleshooting (source
simulate)
Eliminates the ne ed to re turnto the shop to get a loop
calibrator for troubleshiitingafter finding a bad signal w ith
non-contact me asureme nt
Helps speed up looptroubleshooting - saves time
and money
Source and measure VDC(773 only)
Troubleshoot voltage input andoutput devices.
Measure presence of 24V looppower. Measure 1 to 5 or 0 to10V process signals. Test chart
recorders
Eliminates the ne ed to re turnto the shop to get a voltage
source tool or a DMM. Savestime and money.
4 to 20 mA In/out (773 only)Dual channel mA source and
mea surement fortroubleshooting
Source 4 to 20 mA signals intovalves and mA signal
conditioners andsimulta neously mea sure 4 to
20 mA positioning outputsignals.
Quick troubleshooting ofdevices with mA inputs and
outputs. Save time and money
4 to 20 mA scaled output (773only)
Scaled mA output provides a
mA signal outputrepresentative of the measured
Connect a logging DMM and
log the mA signal withoutbreaking the loop
Troubleshooting and document
intermittent or erratic 4 to 20mA loop signals.
Loop power supply (772 and773)
Power a transmitter
Substitute testing of theinstalled 24V loop power
supply. Powe r a transmitterand measure its mA outputsignal for troubleshooting.
Eliminates the ne ed to re turnto the shop to get a power
supply. Saves time a nd money.
772 and 773
773 only functions
8/12/2019 773_3 Distrib_sales Intro Final
7/11Fluke-772 and 773 mA Process Clamp Meters 7
Prospective Customers
Troubleshoot and Commission Transmitters
Valves, I/Ps, other 4-20 mA devices Analog I/O
As with the 771 mA Clamp Meter, the base for the772/773 is quite broad, including:
Instrumentation Technicians in process plants that:
Troubleshoot and Commission
Automation and PLC specialists, electricians that:
PLC Analog I/O
DCS Analog I/O
Building Automation and HVAC controls
8/12/2019 773_3 Distrib_sales Intro Final
8/11Fluke-772 and 773 mA Process Clamp Meters 8
Target end user:Instrumentation Professionals
Instrumentation professionals working with mAcontrol systems
Process or instrumentation engineers Instrumentation or I&E technicians
Plant commissioning electricians and contractors
Troubleshoot and Commission Transmitters Valves, I/Ps, other 4-20 mA devices Analog I/O
8/12/2019 773_3 Distrib_sales Intro Final
9/11Fluke-772 and 773 mA Process Clamp Meters 9
Target end user:Automation and PLC specialists
Regional and factory specialists likeRockwell/Allen Bradley, Siemens. GE Fanuc,Honeywell, Yokogawa, ABB, etc
In house control systems engineers Electrical contractors commissioning new process
plants, electricians trained on PLCsTroubleshoot and Commission PLC Analog I/O DCS Analog I/O Building Automation and HVAC controls
Measure mA control signals on terminal blocks quickly withoutshutting down the system
Quic kly test analog I /O poin ts. Oftenmany thou sands of m easurement
poin ts per PLC or DCS system
8/12/2019 773_3 Distrib_sales Intro Final
10/11Fluke-772 and 773 mA Process Clamp Meters 10
Customer Demonstration Guide
Describes how todemo the 772 or 773with or without aprocess control loop
Key selling points mA Measurement without
breaking loop
Cost justificationworksheet
Included with demounits
8/12/2019 773_3 Distrib_sales Intro Final
11/11Fluke-772 and 773 mA Process Clamp Meters 11Innovative new tools save time and money
771, 772 and 773 Positioning
Fluke-771 Fluke-772 Fluke-773
Positioning Non-contact mA loopmeasurementIntegrated mA loop
troubleshooting Advanced process
troubleshooting
mA measure, jaw X X X
mA measure, incircuit X X
Loop power X X
mA source X X
DCV measure X
DCV source X
mA scaled output X
mA in / out X