Post on 13-Apr-2020
(1)
(2)
(3)
(4) Gerät:
(5) Hersteller:
(6) Anschrift:
EG-Baumusterprüfbescheinigung - Richtlinie 94/9/EG -
Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen
DMT 02 ATEX E 063
Druckmessumformer SITRANS P MS/DS 111/DSIII-P A Typ 7MF4***-*++**-*B+*-Z EOl
Siemens AG
76162 Karlsruhe
6 DMT
(7) Die Bauart dieses Gerätes sowie die verschiedenen zulässigen Ausführungen sind m der Anlage zu dieser Baumusterprüfbescheinigung festgelegt.
(8) Die Zertifizierungsstelle der Deutsche Montan Technologie GmbH, benannte Stelle Nr. 0158 gemäß Artikel 9 der Richtlinie 94/9/EG des Europäischen Parlaments und des Rates vom 23. März 1994, bescheinigt, dass das Gerät die grundlegenden Sicherheits- und Gesundheitsanforderungen für die Konzeption und den Bau von Geräten und Schutzsystemen zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen gemäß Anhang II der Richtlinie erfüllt. Die Ergebnisse der Prüfung sind in dem PrüfProtokoll BVS PP 02.2033 EG niedergelegt.
(9) Die grundlegenden Sicherheits- und Gesundheitsanforderungen werden erfüllt durch Übereinstimmung mit
EN 50281-1-1: 1998 Staubexplosionsschutz
(10) Falls das Zeichen „X" hinter der Bescheinigungsnummer steht, wird in der Anlage zu dieser Bescheinigung auf besondere Bedingungen für die sichere Anwendung des Gerätes hingewiesen.
(11) Diese EG-Baumusterpiüfbescheinigung bezieht sich nur auf die Konzeption und die Baumusterprüfung des beschriebenen Gerätes in Übereinstimmung mit der Richtlinie 94/9/EG. Für Herstellung und Inverkehrbringen des Gerätes sind weitere Anforderungen der Richtlinie zu erfüllen, die nicht durch diese Bescheinigung abgedeckt sind.
(12) Die Kennzeichnung des Gerätes muss die folgenden Angaben enthalten:
bzw. II 1 D IP 65 T 120 °C (GII 1/2 DIP 65 T 120 °C
II 2 D IP 65 T 120 °C bei Speisung aus einer eigensicheren Quelle
bei Speisung aus einer nicht eigensicheren Quelle
Deutsche Montan Technologie GmbH Essen, den 09. April 2002
Fachbereichsleiter
Seite 1 von 4 zu DMT 02 A TEX E 063 Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
DMT
(13) Anlage zur
(14) EG-Baumusterprüfbescheinigung
DMT 02 ATEX E 063
(15) 15.l Gegenstand und Typ
Druckmessumformer SITRANS P MS/DSIII/DSIII-PA Typ 7MF4***-*++**-*B+*ZE01
"L*13- MS-Ausführung *33 - DSIIl-Ausführung *34 - DSIIl-Ausführung mit Profibus PA
Die nicht erläuterten Stellen des Typenschlüssels sind für den Explosionsschutz ohne Bedeutung.
15.2 BescllJeibung
Der Druckmessumformer SITRANS P MS/DSIII/DSIIl-PA Typ 7MF4***-*++**-*B+*ZE01 dient der Druckmessung in mit pulverförmigen oder körnigen Schüttgütern gefüllten Behältern. Das Ausgangssignal ist ein eingeprägter Gleichstrom von 4 bis 20 mA und ist dem gemessenen Eingangsdruck direkt proportional. Das Druckmessumformer SITRANS P MS/DSIIl/DSIII-PA Typ 7MF4***-*++**-*B+*ZE01 ist bereits zertifiziert für die Kategorie 1/2 G (PTB 99 ATEX 2122 auf Basis PTB Ex 99-29092 incl. 1. Ergänzung vom 30.06.2000 und 2. Ergänzung vom 07.09.2001). Wird der Druckmessumformer aus einer eigensicheren Quelle gespeist, so entspricht er der Kategorie lD bzw. 1/2D bei Einbau in eine Trennwand. Bei Speisung aus einer nicht eigensicheren Quelle entspricht er der Kategorie 2D
15.3 Kenngrößen
15 .3 .1. Elektrische Kenngrößen
15.3.1.1 Kategorie 1D bzw. 1 /2D
15.3.1.1.1 SITRANS P MS und SITRANS P DSIII
Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss:+,-)
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
in Zündschutzart Eigensicherheit EEx ia IIB/IIC nur zum Anschluss an einen bescheinigten eigensicheren Stromkreis Höchstwerte: Ui 30 V Ii 100 mA Pi 750 mW Ri ~ 300 n Li 0,4 mH Ci 6 nF
in Zündschutzart Eigensicherheit EEx ia IIB/IIC zum Anschluss an für die Verwendung in Bereichen mit brennbarem Staub zugelassenen Anzeigern oder Prüfgeräten
Seite 2 von 4 zu DMT 02 A TEX E 063 Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
Messzellenstrom.kreis
15.3.1.1.2 SITRANS P-DSIII-PA
Profibus- PA (Klemmen 7+ und 8-) (terminals 7+ and 8-)
Kontrollanzeiger-/Signalstromkreis
15.3.1.2 Kategorie 2D
15.3 .1.2.1 SITRANS P MS und SITRANS P DSIII
Hilfsenergie-/ Ausgangssignalstrom.kreis (Anschluss:+,-)
Max. Leistung
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstrom.kreis
15.3.1.2.2 SITRANS P-DSIII-PA
Hilfsenergie-/ Ausgangssignalstrom.kreis (Anschluss:+,-)
Max. Leistung
Kontrollanzeiger-/Signalstromkreis
.6 DMT
Höchstwerte der Zusammenschaltung von Kontrollanzeiger-Signalstrom.kreis und Prüfgerät: Ui 30 V Ii 100 mA Pi 750 mW
IIC IIB Lo 0,5 mH 1,0 mH Co 3 nF 50 nF
geräteintem, keine Schnittstelle nach außen.
in Zündschutzart Eigensicherheit EEx ia IIC/IIB nur zum Anschluss an einen bescheinigten Stromkreis (z.B. FISCO-Speisegerät) mit d H'' h „ ß fi l d T b 11 en oc stwerten gema 01gen er a e e:
FIS CO-Speisegerät Lineare Barriere Ia Ia
IIC/IIB IIC/IIB U0 [V] 17,5 24 lo fmAl 380 250 P0 [W] 5,32 1,2
Li 7 µH Ci 1,1 nF
siehe 15.3.1.1.1
DC 10,5„.45 V
1,2 w
nur zum Anschluss an außerhalb des explosionsgefährdeten Bereichs errichtete erdfreie Anzeiger oder Prüfgeräte ohne eigene Stromversorgung (Batterie, Netz) und ohne Fremdstromkreise
geräteintem, keine Schnittstelle nach außen.
DC 9.„32 V
1,2 w
siehe 15.3.1.2.l Seite 3 von 4 zu DMT 02 A TEX E 063
Dieses Zertifikat darf nur unverändert weiterverbreitet werden. Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)1 72-1716
15.3.2. Thermische Kenngrößen
Zulässige Umgebungstemperatur
Maximale Oberflächentemperatur T
15.3.3 Schutzart gemäß EN 60529
( 16) Prüfi>rotokoll BVS PP 02.2033 EG, Stand 09.04.2002
(17) Be. ondere Bedingungen für die sichere Anwendung Entfällt
- 40 °C :-::; T amb :.,:; + 85 °C
120 °C
IP65
Seite 4 von 4 zu DMT 02 A TEX E 063 Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
6 DMT
Gerät:
Hersteller:
Anschrift:
Beschreibung
6 EXAM BBG Prüf- und Zertifizier GmbH
1. Nachtrag (Ergänzung gemäß Richtlinie 94/9/EG Anhang III Ziffer 6)
zur EG-Baumusterprütbescheinigung
DMT 02 ATEX E 063
Druckmessumformer SITRANS P MS/DS 111/DSIII-PA Typ 7MF4***-*++**-*B+*-Z EOl
Siemens AG
76162 Karlsruhe
Der Druckmessumformer SITRANS P MS/DS IIl/DSIII-PA Typ 7MF4***-*++**-*B+*-Z EOl wird nach den im zugehörigen Prüiprotokoll aufgeführten Prüfungsunterlagen modifiziert. Diese Änderungen sind bereits Gegenstand der 3. Ergänzung vom 11.07.03 und 4. Ergänzung vom 12.05.04 zu PTB 99 ATEX 2122 auf Basis PTB Ex 99-29092. Der Dmckmessumformer SITRANS P DSIIl-FF Typ 7MF4*35-*++**-*B+*ZE01 (Fieldbus Foundation) wird hinzugefügt.
Druckmessumformer SITRANS P MS/DSIIl/DSIII-** Typ 7MF4***-*++**-*B+*ZE01 L_
13 -33 -34 -35 -
MS-Ausführung DSIII-Ausführung DSIIl-Ausführung mit Profibus PA DSIII-Ausführung mit Fieldbus Foundation
0 - Relativdruck 1 - frontbündige Membran 2 - Absolutdruck 3 - Absolutdruck 4 - Differenzdruck 5 - Differenzdruck 6 - Füllstand
PA - Profibus PA FF - Fieldbus Foundation
Die nicht erläuterten Stellen des Typenschlüssels sind für den Explosionsschutz olme Bedeutung.
Seite 1 vo11 4 zu DMT 02 A TEX E 063/ N 1 Dieses Zertifikat darf nur WlVerändert weiterverbreitet werden.
Dinnendahlstraße 9 44809 Bochum Telefon 0234/3696-IOS Telefax 0234/3696-110 (bis 31 .05 .2003: Deutsche Montan Technologie GmbH Am Technologiepark J 45307 Essen)
Kenngrößen
Elektrische Kenngrößen
Kategorie lD bzw. 1 /2D
SITRANS P MS und SITRANS P DSIII Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss:+,-)
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstromkreis
SITRANS P-DSIII-PA Profibus- PA (Klemmen 7+ und 8-)
Kontrollanzeiger-/Signalstromkreis
6 EXAM BBG Prüf- und Zertifizier GmbH
in Zündschutzart Eigensicherheit EEx ia IIB/IIC nur zum Anschluss an einen bescheinigten eigensicheren Stromkreis Höchstwerte: Ui 30 V Ii 100 mA Pi 750 mW Ri ~ 300 Q Li 0,4 mH Ci 6 nF
in Zündschutzart Eigensicherheit EEx ia IIB/IIC zum Anschluss an für die Verwendung in Bereichen mit brennbarem Staub zugelassenen Anzeigern oder Prüfgeräten
Höchstwerte der Zusammenschaltung von Kontrollanzeiger-Signalstromkreis und Prüfgerät: Ui 30 V Ii 100 mA Pi 750 mW
Lo Co
IIC 0,5 mH 3 nF
IIB 1,0 mH
50 nF
geräteintem, keine Schnittstelle nach außen.
in Zündschutzart Eigensicherheit EEx ia IIC/IIB nur zum Anschluss an einen bescheinigten Stromkreis (z.B. FISCO-Speisegerät)
. d Hö h äß fi 1 d T b II mit en c stwerten gern 01gen er a e e: FISCO-Speisegerät Lineare Barriere
ia ia IIC/IIB IIC/IIB
Ua fVl 17,5 24 10 [mA] 380 250 Po fWl 5,32 1,2
Li 7 µH Ci 1, 1 nF
siehe SITRANS P MS und SITRANS P DSIII
Seite 2 von 4 zu DMT 02 A TEX E 063/ N 1 Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Dinnendahlstraße 9 44809 Bochum Telefon 0234/3696-105 Telefax 0234/3696-11 O (bis 31.05.2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen)
Kategorie 2D
SITRANS P MS und SITRANS P DSIII Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss:+,-)
Max. Leistung
Kontrollanzeiger-/ Signalstromkreis (Anschluss :Steckkontakte)
Messzellenstromkreis
SITRANS P-DSIII-PA Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss:+,-)
Max. Leistung
Kontrollanzeiger-/Signalstromkreis Messzellenstromkreis
SITRANS P-DSIII-FF Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss:+,-)
Simulations-Schnittstelle (Anschlüsse Xl03, Pins 11, 12, 15, 16)
6 EXAM BBG Prüf- und Zertifizier GmbH
DC 10,5„.45 V
1,2 w
nur zum Anschluss an außerhalb des explosionsgefährdeten Bereichs errichtete erdfreie Anzeiger oder Prüfgeräte ohne eigene Stromversorgung (Batterie, Netz) und ohne Fremdstromkreise
geräteintem, keine Schnittstelle nach außen.
DC 9 .. .32 V
1,2 w
siehe SITRANS P MS und SITRANS P DSIII siehe SITRANS P MS und SITRANS P DSIII
in Zündschutzart Eigensicherheit EEx ia IIC/IIB bzw. EEx ib IIC/IIB nur zum Anschluss an einen bescheinigten eigensicheren Stromkreis (z.B. FISCO-Speisegerät) mit den Höchstwerten entsprechend folgender Tabelle:
Ua Io Po
Li=7 µH Ci= 1,1 nF
FISCO-Speisegerät ia/ib für Gruppe IIB/IIC
17,5 V 380mA 5,32 w
lineare Barriere ia/ib für Gruppe llB/IIC
24 V 250mA 1,2 w
in Zündschutzart Eigensicherheit EEx ia IIC zum Anschluss von Prüfinstrumenten in der Installationsphase, während des Betriebes sind Pin 15 und 16 zu brücken Höchstwerte Ui= 6 V P;= 1,2 w R;= 750 n Uo= 5,5 n 1 = 0 12 mA
Seite 3 von 4 zu DMT 02 A TEX E 063/ NI Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Dinnendahlstraße 9 44809 Bochum Telefon 0234/3696-105 Telefax 0234/3696-110 (bis 31.05 .2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen)
6 EXAM BBG Prüf- und Zertifizier GmbH
Thermische Kenngrößen
Zulässige Umgebungstemperatur -40 °C s Tamb s +85 °C
Maximale Oberflächentemperatur T 120 °C
Schutzart
gemäß EN 60529 IP65
Die grundlegenden Sicherheits- und Gesundheitsanforderungen der geänderten Ausführung werden erfüllt durch Übereinstimmung mit
EN 50281-1-1:1998 +Al Staubexplosionsschutz.
Die Kennzeichnung des Gerätes muss die folgenden Angaben enthalten:
II 1 D IP 65 T 120 °C (G II 1/2 D IP 65 T 120 °C
II 2 D IP 65 T 120 °C
bzw.
bei Speisung aus einer eigensicheren Quelle
bei Speisung aus einer nicht eigensicheren Quelle
Besondere Bedingungen für die sichere Anwendung bzw. Verwendungshinweise entfällt
Prüförotokoll
BVS PP 02.2033 EG, Stand 18.05.2006
EXAM BBG Prüf- und Zertifizier GmbH Bochum. den 18. Mai 2006
Seite 4 von 4 zu DMT 02 ATEX E 063/ NI Dieses Zertifikat darf nur unverändert weiterverbreitet werden.
Dinnendahlstraße 9 44809 Bochum Telefon 0234/3696-105 Telefax 0234/3696-110 (bis 31.05.2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen)
,, '
(1) 2. Nachtrag zur EG-Baumusterprüfbescheinigun.g
(2)
(3)
(4)
(5)
Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen - Richtlinie 94/9/EG Ergänzung gemäß Anhang III Ziffer 6
Nr. der EG-Baumusterprüfbescheinigung: DMT 02 ATEX E 063
Gerät:
Hersteller:
Druckmessumformer SITRANS P MS/DS 111/DSlll-PA Typ 7MF4***-*++**-*B+*-Z E01
Siemens AG - lndustry Seetor
(6) Anschrift: 76187 Karlsruhe
(7)
(8)
(9)
(10)
( 11)
(12)
Speisung aus einer nicht eigensicheren Quelle
II 2 D Ex tb lllC IP65 T120°c Db
DEKRA EXAM GmbH Bochum, den 29.08.2011
Seite 1 von 4 zu DMT 02 ATEX E 063 / N2
Fachbereich
Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden. DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234,3696-110, zs-exam@dekra.com
~ ~ w c L\
(13)
(14)
(15)
Anlage zum
2. Nachtrag zur EG-Baumusterprüfbescheinigung DMT 02 ATEX E 063
15.1 Gegenstand und Typ
Druckmessumformer SITRANS P MS/DSlll/DSlll-** Typ 7MF4***-*++**-*B+*ZE01
l
Seite 2 von 4 zu DMT 02 ATEX E 063 / N2 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
~ ~ w Q
L\
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstromkreis
SITRANS P-DSlll-PA Profibus- PA (Klemmen 7+ und 8-)
Max. Leistung
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstromkreis
SITRANS P-DSlll-PA Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss :+,-)
Max. Leistung
Kontrollanzeiger-/Signalstromkreis Messzellenstromkreis
in Zündschutzart Eigensicherheit Ex ia 118/110 zum Anschluss an für die Verwendung in · Bereichen mit brennbarem Staub z4g:e1assenen Anzeigern oder Prüfgeräten · Höchstwerte der Zusammenschaltung von Kontrollanzeiger-Signalstromkreis und Prüfgerät:
Ui = 30 V li = 100 Pi = 750
geräteintern, keine Schnittstelle nach außen .
DC 9„. 32 V
1,2W
siehe SITRANS P MS und SITRANS P DSlll siehe SITRANS P MS und SITRANS P DSlll
Seite 3 von 4 zu DMT 02 ATEX E 063 / N2 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum. Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
~ ~ w Q
L\
SffRANS P-DSlll-FF Hilfsenergie-/Ausgangssignalstromkreis (Anschluss: +,-)
Simulations-Schnittstelle (Anschlüsse X 103, Pins 11, 12, 15, 16)
Thermische Kenngrößen I
Schutzart
gemäß EN 60529 IP65
( 16) Prüfprotokoll
BVS PP 02.2033 EG, Stand 29.08.2011
in Zündschutzart Eigensicherheit Ex ia llC/llB bzw. Ex ib llC/llB nur zum Anschluss an einen . bescheinigten eigensichere Stromkreis (z.B. FISCO-Speisegerät) mit den 8e>chstwerten entsprechend folgender Tabelle:
FISCO-Speisegerät ia/ib für Gru e 118/llC
17,5 V 380 mA
5,32W
linea~e Barriere ia/ib für Gr,ll e llB/llC
24 V 250 mA
1,2W
(17) Besondere Bedingungen für die sichere Anwehduhg
entfällt
Seite 4 von 4 zu DMT 02 A TEX E 063 I N2 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Oinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
(1) 3. Nachtrag zur EG-Baumusterprüfbescheinigung
(2)
(3)
(4)
(5)
Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen - Richtlinie 94/9/EG Ergänzung gemäß Anhang III Ziffer 6
Nr. der EG-Baumusterprüfbescheinigung: DMT 02 ATEX E 063
Gerät:
Hersteller:
Druckmessumformer SITRANS P MS/DSlll/DSlll-PA Typ 7MF4***-*++**-*B+*-Z E01
Siemens AG - 1 IA CE SE
(6) Anschrift: Siemensallee 84, 76187 Karlsruhe
(7)
(8)
(9)
(10)
( 11)
(12)
DEKRA EXAM GmbH Bochum, den 05.12.2014
i
./~ Zertifizierungsstelle
Seite 1 von 4 zu DMT 02 ATEX E 063 / N3 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
(13) Anlage zum
(14) 3. Nachtrag zur EG-Baumusterpi"üfbescheinigung DMT 02 ATEX E 063
(15) 15.1 Gegenstand und Typ
300 n = 0,4 mH = 6 nF
Seite 2 von 4 zu DMT 02 ATEX E 063 / N3 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49,234.3696-110, zs-exam@dekra,com
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstromkreis
SITRANS P-DSlll-PA Profibus- PA (Klemmen 7+ und 8-)
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte)
Messzellenstrom kreis
SITRANS P-DSlll-PA Hilfsenergie-/Ausgangssignalstromkreis (Anschluss:+,-)
Max. Leistung
Kontrol lanzeiger-/Signalstromkreis Messzellenstrom kreis
1
),'/
in Zündschutzart Eigensicherheit Ex ia 11 8/llC. zum Anschluss an für die Verwendung ir:i Bereichen mit brennbarem Staub zugelassenen Anzeigern oder Prüfgeräten. Höchstwerte der Zusammenschaltung von Kontrollanzeiger-Signalstromkreis und Pri!lfgerät:
DC 9„.32 V
1,2W
siehe SITRANS P MS und SITRANS P DSlll siehe SITRANS P MS und SITRANS P DSlll
Seite 3 von 4 zu DMT 02 ATEX E 063 / N3 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234.3696-11 O, zs-exam@dekra.com
SITRANS P-DSlll-FF Hilfsenergie-/ Ausgangssignalstromkreis (Anschluss: +,-)
Simulations-Schnittstelle (Anschlüsse X103, Pins 11, 12, 15, 16)
( 16) Prüfprotokoll
!
IJ
in Zündschutzart Eigensicherheit Ex ia llC/118 bzw. Ex ib llC/118 nur zum Anschluss an einen bescheinigten eigensicheren Stromkreis (z.B. FISCO-Speisegerät) mit den Höchstwerten entsprechend folgend.er Tabelle:
lineare Barriere ia/ib für Gru e 118/llC
1 24 V 1 250 mA
1,2 W
(17) Besondere Bedihqun9en für die sichere Anwendung' 1
Entfällt
Seite 4 von 4 zu DMT 02 ATEX E 063 / N3 Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
(1) 4. Nachtrag zur EG-Baumusterprüfbescheinigung
(2)
(3)
(4)
(5) (6)
(7)
(8)
(9)
(10)
( 11)
(12)
Geräte und Schutzsysteme zur bestimmungsgemäßen Verwendung
in explosionsgefährdeten Bereichen - Richtlinie 94/9/EG
Ergänzung gemäß Anhang III Ziffer 6
Nr. der EG-Baumusterprüfbescheinigung: DMT 02 ATEX E 063
Gerät: Druckmessumformer SITRANS P DSlll Typ 7MF4***-*++**-*B+*-Z +E01 SITRANS P410 Typ 7MF4***-*++**-*B+*-Z +C41 +E01 SITRANS P310 7MF2***-*++**-*B+*-Z +E01
Hersteller: Siemens AG
Anschrift: 76181 Karlsruhe
DEKRA EXAM GmbH Bochum, den 11.05.2015
Zertifizierungsstelle
Seite 1 von 4 zu DMT 02 A TEX E 063 I N4
Fachbereich
(( DAk!~"'' Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Deutschland
Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com m...:11nenJJ111111 tole 1)1l l}il6"r 0 ) 0C
(13) Anlage zum
(14) 4. Nachtrag zur EG-Baumusterprüfbescheinigung DMT 02 ATEX E 063
(15) 15.1 Gegenstand und Typ
Druckmessumformer SITRANS P DSlll Typ 7MF4*"'*-*++**-*B+*-Z +E01
T 33 - DSlll Ausführung mit HART 34 - DSlll Ausführung mit Profibus PA 35 - DSlll Ausführung mit Fieldbus Foundation
0 - Relativdruck 1 - Frontbündige Membran 2 - Absolutdruck
Druckmessumformer SITRANS P410
0 - Relativdruck 1 - Frontbündige Membran 2 - Absolutdruck 3 -Absolutdruck 4 - Differenzdruck 5 - Differenzdruck 6 - Füllstand
Die nicht erläuterten Stellen des Typenschlüssels sind für den Explosionsschutz ohne Bedeutung.
Seite 2 von 4 zu DMT 02 A TEX E 063 I N4
Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Deutschland
Telefon +49.234.3696-105, Telefax +49.234.3696-110, zs-exam@dekra.com
15.2 Beschreibung
Grund für diesen Nachtrag sind veränderte Typenbezeichnungen und die Überarbeitung der
elektrischen Kenngrößen. Die Betrachtung der Elektronik erfolgte in PTB 13 ATEX 2007 X.
15.3 Kenngrößen Elektrische Kenngrößen
Kategorie 1 D bzw. 1/20
SITRANS P DSlll, SITRANS P410, SITRANS P310 - Varianten mit HART Ausführung
Hilfsenergie-/Ausgangssignalstromkreis (Anschluss:+,-)
Kontrollanzeiger-/ Signalstromkreis (Anschluss: Steckkontakte, Flachstecker)
Messzellenstromkreis
FISCO-Speisegerät ia llC
UofVl 17,5 10 [mA] 380
PofWl 5,32
Li = 7 µH C1 = 1,1 nF
Lineare Barriere ia llC
24 174
1
Kontrollanzeiger-/Signalstromkreis siehe SITRANS P DSlll, SITRANS P410, SITRANS P310 - Varianten mit HART Ausführung
Seite 3 von 4 zu DMT 02 ATEX E 0631 N4
Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Deutschland
Telefon +49.234.3696-105, Telefax +49.234.3696-11 O, zs-exam@dekra.com
~ .. . '
. ~ . ,
'"
...
Kategorie 20
SITRANS P DSlll, SITRANS P410, SITRANS P310 - Varianten mit HART Ausführung
Hilfsenergie-/Ausgangssignalstromkreis (Anschluss:+,-)
Max. Leistung
DC 10,5„.45 V
1,2W
SITRANS P DSlll, SITRANS P410, SITRANS P310-Varianten mit PA/FF Ausführung
Hilfsenergie-/Ausgangssignalstromkreis (Anschluss:+,-)
Max. Leistung
Thermische Kenngrößen
Schutzart gemäß EN 60529
DC 9„ .32 V
1,2W
(16) Prüfprotokoll 1,
BVS PP 02.2033 EG,1Stand 11 .05·:2p1JS/
(17)
(('DAkkS ~ ~fu::
I I I
Seite 4 von 4 zu DMT 02 ATEX E 063 / N4
Dieses Zertifikat darf nur vollständig und unverändert weiterverbreitet werden.
DEKRA EXAM GmbH, Dinnendahlstraße 9, 44809 Bochum, Deutschland
Telefon +49.234.3696-105, Telefax +49.234.3696-11 O, zs-exam@dekra.com
(1)
(2)
(3)
Translation
EC-Type Examination Certificate - Directive 94/9/EC -
Equipment and protective systems intended for use in potentially explosive atmospheres
DMT 02 ATEX E 063
(4) Equipment: Druckmessumformer Type SITRANS P MS/DS III
(5) Manufacturer: Siemens AG
(6) Address: 76162 Karlsruhe
DMT
(7) The design and construction of this equipment and any acceptable variation thereto are specified in the schedule to this type examination certificate.
(8) The certification body of Deutsche Montan Technologie GmbH, notified body no. 0158 in accordance with Article 9 of the Directive 94/9/EC of the European Parliament and the Council of 23 March 1994, certifies that this equipment has been found to comply with the Essential Health and Safety Requirements relating to the design and construction of equipment and protective systems intended for use in potentially explosive atmospheres, given in Annex II to the Directive. The examination and test results are recorded in the test and assessment report BVS PP 02.2033 EG.
(9) The Essential Health and Safety Requirements are assured by compliance with:
EN 50281-1-1:1998 Dust explosion protection
(10) If the sign "X" is placed after the certificate number, it indicates that the equipment is subject to special conditions for safe use specified in the schedule to this certificate.
(11) This EC-Type Examination Certificate relates only to the design, examination and tests of the specified equipment in accordance to Directive 94/9/EC. Further requirements of the Directive apply to the manufacturing process and supply of this equipment. These are not covered by this certificate
(12) The marking ofthe equipment shall include the following:
II 1 D IP 65 T 120 °C (G II 1/2 D IP 65 T 120 °C
II 2 D IP 65 T 120 °C
resp. supplied intrinsically safe
not supplied intrinsically safe
Deutsche Montan Technologie GmbH Essen, dated 09. April 2002
Signed: Jockers Signed: Eickhoff
DMT-Certification body Head of special services unit
page 1 of 4 to DMT 02 A TEX E 063 This certificate may only be reproduced in its entirety and without change
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
6 DMT
(13) Appendix to
(14) EC-Type Examination Certificate
DMT 02 ATEX E 063
(15) 15. L Subj ect and tvpe
Pressure transmitter SITRANS P MS/DSIII/DSIII-PA type 7MF4***-*++**-*B+*ZE01
l*13 - MS-version
*33 - DSIIl-Version
*34 - DSIIl-Version with Profibus PA
The digits which have not been explained are not relevant for the explosion protection.
'15 .2 Description
The pressure measuring transducer SITRANS P MS/DSIII Typ 7MF4***-*++**-*B+*ZE01 serves to measure the pressure measurement in vessels containing powdery or grainy bulk material. The output signal is a load-independent current of 4 to 20 mA linear proportional to the input pressure. The pressure measuring transducer SITRANS P MS/DSIII type 7MF4***-*++**-*B+*ZE01 has already been certified for category 1 / 2 G (PTB 99 ATEX 2122 based on PTB Ex 99-29092 incl. 1. Supplement dated 30.06.2000 and 2. Supplement dated 07.09.2001). In case the pressure measuring transducer is supplied intrinsically safe, it fulfils the requirements of category lD resp. 1/2D when mounted in a separation wall. In case it is not supplied intrinsically safe, it meets category 2D.
15.3 Parameters
15.3.1 Electrical data
15.3.1.1 Category lD resp. 1 /2D
15.3.1.1.1 SITRANS P MS and SITRANS P DSIII
Auxiliary energy-/ output signal circuit (terminals: +,-)
Pilot indicator circuit (terminal: plug-in connector)
in type ofprotection EEx ia IIB/IIC only for connection to a certified intrinsically safe circuit Maximum values: Ui 30 V Ii 100 mA Pi 750 mW Ri ~ 300 Q Li 0,4 mH Ci 6 nF
in type ofprotection Intrinsic Safety EEx ia IIB/IIC only for connection to indicators or test instruments which are certified for use in the presence of combustible dust
page 2 of 4 to DMT 02 A TEX E 063 This certificate may only be reproduced in its entirety and without change ,
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
Measuring cell-circuit
15 .3.1.1.2 SITRANS P-DSIII-PA
Profibus- PA (terminals 7+ and 8-)
Pilot indicator circuit
15.3.1.2 Category 2D
15.3.1.2.1 SITRANS P MS and SITRANS P DSIII
Auxiliary energy-/ output signal circuit (terminals: +,-)
max. power consumption
Pilot indicator circuit (terminal: plug-in connector)
Measuring cell-circuit
15.3.1.2.2 SITRANS P-DSIII-PA
Auxiliary energy-/ output signal circuit (terminals: +,-)
max. power consumption
Pilot indicator circuit Measuring cell-circuit
6 DMT
Maximum values for the interconnection of pilot indicator circuit and test instrument Ui 30 V Ii 100 mA Pi 750 mW
Lo Co
IIC 0,5 mH 3 nF
IIB 1,0 mH
50 nF
intemal, no external interface
in type ofprotection Intrinsic Safety EEx ia IIC/IIB only for connection to a certified circuit (e.g. FISCO supply unit) with maximum values accor d' h fi 11 . bl rng to t e ·o owmg ta e:
FISCO-supply unit Linear barrier Ia ia
IIC/IIB IIC/IIB Ua [V] 17,5 24 Ia fmAl 380 250 Pa [W] 5,32 1,2
Li 7 µH Ci 1,1 nF
see 15.3.1.1.1
DC 10,5„.45 V
1,2 w
only for connection to floating indicators ortest instruments circuits which are mounted outside the hazardous area and are without internal power supply (battery, mains) and without extemal circuits
intemal, no external interface
DC 9„.32 V
1,2 w
see 15.3.1.2.1 see 15.3.1.2.l
page 3 of 4 to DMT 02 ATEX E 063 This certificate may only be reproduced in its entirety and without change
Am Technologiepark 1, 45307 Essen, Telefon (0201)172-1416, Telefax (0201)172-1716
15.3.2. Thermal data
15.3.3
Permitted ambient temperature
Maximum surface temperature T
Degrees of protection according to EN 60529
(16) Test and assessment report BVS PP 02.2033 EG as of09.04.2002
(17) Special conditions for safe use Inapplicable
- 40 °C ~ Tamb ~ + 85 °C
120 °C
IP65
W e confirm the correctness of the translation from the German original.
6 DMT
In the case of arbitration only the German wording shall be valid and binding.
45307 Essen, 09.04.2002 BVS-Hk/Mi A 20010191
Deutsche Montan Technologie GmbH
~ody
page 4 of 4 to DMT 02 A TEX E 063 This certificate may only be reproduced in its entirety and without change
Am Technologiepark 1, 45307 Essen, Telefon (0201)172- 1416, Telefax (0201) 172-1716
6 EXAM BBG Prüf- und Zertifizier GmbH
Translation
1 st Supplement (Supplement in accordance with Directive 94/9/EC Annex III number 6)
Equipment:
Manufacturer:
Address:
Description
to the EC-Type Examination Certificate
DMT 02 ATEX E 063
Pressure transmitter SITRANS P MS/DS 111/DSIII-PA type 7MF4***-*++**-*B+*-Z EOl
Siemens AG
76162 Karlsruhe, Germany
The pressure measuring transducer SITRANS P MS/DS III/DSIIl-PA type 7MF4***-*++**-*B+*-Z EOl is modified according to the descriptive documents as mentioned in the pertinent test and assessment report. These modifications have already been regarded in the 3. Supplement dated 11.07.03 and 4. Supplement dated 12.05.04 of PTB 99 ATEX 2122 based on PTB Ex 99-29092. The pressure measuring transducer SITRANS P DSIII-FF type 7MF4*35-*++**-*B+*ZEOI (fieldbus foundation) is added.
Pressure transmitter SITRANS P MS/DSIIl/DSIII-** type 7MF4***-*++**-*B+*ZE01
L13-33 -34 -35 -
MS-version DSIII-Version DSIII-Version with Profibus PA DSIII-Version with Fieldbus Foundation
0 - relative pressure 1 - plain membrane 2 - absolute pressure 3 - absolute pressure 4 - difference pressure 5 - difference pressure 6- level
PA - Profibus PA FF - Fieldbus Foundation
The digits which have not been explained are not relevant for the explosion protection.
Page 1 of5 to DMT 02 ATEX E 063 /Nl This certificate may only be reproduced in its entirety and without change.
Dinnendahlstrasse 9 44809 Bochum Gennany Phone +49 234/3696-105 Fax +49 234/3696-110 (until 31 .05.2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen Gennany)
Parameters
Electrical data
Category lD resp . 1 /2D
SITRANS P MS and SITRANS P DSIII
Auxiliary energy-/ output signal circuit (terminals: +,-)
Pilot indicator circuit (terminal: plug-in connector)
Measuring cell-circuit
SlTRANS P-DSIII-PA
Profibus- PA (terminals 7+ and 8-)
Pilot indicator circuit
6 EXAM BBG Prüf- und Zertifizier GmbH
in type ofprotection EEx ia IIB/IIC only for connection to a certified intrinsically safe circuit Maximum values: Ui 30 V Ii 100 mA Pi 750 mW Ri ~ 300 Q Li 0,4 mH Ci = 6 nF
in type ofprotection Intrinsic Safety EEx ia IIB/IIC only for connection to indicators or test instruments which are certified for use in the presence of combustible dust
Maximum values for the interconnection of pilot indicator circuit and test instrument Ui 30 V Ii 100 mA Pi 750 mW
Lo Co
IIC 0,5 mH 3 nF
IIB 1,0 mH
50 nF
intemal, no extemal interface
in type ofprotection Intrinsic Safety EEx ia IIC/IIB only for connection to a certified circuit (e.g. FISCO supply unit) with maximum values accor d' t h f n · t bl mg o t e o owmg a e:
FISCO-supply unit Linear barrier la la
IIC/IIB IIC/IIB Uo fVl 17,5 24 I0 [mA] 380 250 Po fWl 5,32 1,2
Li 7 µH Ci 1,1 nF
see SITRANS P MS and SITRANS P DSIII
Page 2 ofS to DMT 02 ATEX E 063 / NI This certificate may only be reproduced in its entirety and without change.
Dinnendahlstrasse 9 44809 Bochum Gemiany Phone +49 234/3696-105 Fax +49 234/3696-110 (until 31 05 2003 : Deutsche Montan Technologie GmbH Am Technologiepark J 45307 Essen Germany)
Category 2D
SITRANS P MS and SITRANS P DSIII
Auxiliary energy-/ output signal circuit ( terrninals : +, -)
max. power consumption
Pilot indicator circuit (terminal: plug-in connector)
Measuring cell-circuit
SITRANS P-DSIII-PA Auxiliary energy-/ output signal circuit (terminals: +,-)
max. power consumption
Pilot indicator circuit Measuring cell-circuit
SITRANS P-DSIIl-FF Auxiliary energie-/ output signal circuit (terminals: +,-)
6 EXAM BBG Prüf- und Zertifizier GmbH
DC 10,5.„45 V
1,2 w
only for connection to floating indicators or test instruments circuits which are mounted outside the hazardous area and are without internal power supply (battery, mains) and without external circuits
intemal, no external interface
DC 9 ... 32 V
1,2 w
see SITRANS P MS and SITRANS P DSIII see SITRANS P MS and SITRANS P DSIII
in type ofprotection lntrinsic Safety EEx ia IIC/IIB or EEx ib IIC/IIB only for connection to a certified intrinsically safe circuit (e.g. FISCO-Supply unit) with the maximum values according to the following table
Uo Io Pa
L;=7 µH C; = 1,1 nF
FISCO-supply unit ia/ib for group IIB/IIC
17,5 V 380mA 5,32 w
linear barrier ia/ib for group IIB/llC
24 V 250mA
1,2 w
Page 3 of5 to DMT 02 ATEX E 063 /NI This certificate may only be reproduced in its entirety and without change.
Dinnendahlstrasse 9 44809 Bochum Germany Phone +49 234/3696-105 Fax +49 234/3696-110 (until 31.05.2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen Germany)
Simulation interface (terminals X103, pins 11, 12, 15, 16)
Thermal data
Permitted ambient temperature
Maximum surface temperature T
Degrees ofprotection according to EN 60529
6 EXAM BBG Prüf- und Zertifizier GmbH
in type of protection Intrinsic Safety EEx ia IIC only for connection to test instruments when installing the equipment, pins 15 an 16 shall be bridged during operation
maximum values U;= 6 V Pi= 1,2 W Ri = 750 Q U0 = 5,5 n 10 = 12 mA
- 40 °C :::; T amb :::; + 85 °C
120 °C
IP65
The Essential Health and Safety Requirements ofthe modified equipment are assured by compliance with:
EN 50281-1-1:1998 +Al Dust explosion protection
The marking of the equipment shall include the following:
II 1 D IP 65 T 120 °C (G II 1/2 D IP 65 T 120 °C
II 2 DIP 65T120 °C
resp.
supplied intrinsically safe
supplied intrinsically safe
Page 4 of5 to DMT 02 ATEX E 063 /NI This certificate may only be reproduced in its entirety and without change.
Dinnendahlstrasse 9 44809 Bochum Germany Phone +49 234/3696-105 Fax +49 234/3696-110 (until 31.05.2003: Deutsche Montan Technologie GmbH Am Technologiepark 1 45307 Essen Germany)
Special conditions for safe use none
Test and assessment report BVS PP 02.2033 EG as of 18.05.2006
6 EXAM BBG Prüf- und Zertifizier GmbH
EXAM BBG Prüf- und Zertifizier GmbH Bochum, dated 18. May 2006
Signed: Dr. Jockers Signed: D r . E i c k h o f f
Certification body Special services unit
W e confirm the correctness of the translation from the German original. In the case of arbitration only the German wording shall be valid and binding.
44809 Bochum, 18.05.2006 BVS-Hk/Mi A 20040578
EXAM BBG Prüf- und Zertifizier GmbH
Page 5 ofS to DMT02 ATEX E 063 / Nl This certificate may only be reproduced in its entirety and without change.
Dinnendahlstrasse 9 44809 Bochum Gennany Phone +49 234/3696-105 Fax +49 234/3696-1 10 (until 31 .05 .2003: Deutsche Monlan Technologie GmbH Am Technologiepark 1 45307 Essen Gcnnany)
~ ~ LLI c L\
... I'
' ~ .
Translation
( 1) 3rd Supplement to the EC-Type Examination Certificate
(2)
(3)
(4)
Equipment and protective systems intended for use in potentially explosive atmospheres - Directive 94/9/EC Supplement accordant with Annex III number 6
No. of EC-Type Examination Certificate: DMT 02 ATEX E 063
Equipment: Pressure transmitter SITRANS P MS/DSlll/DSlll-PA type 7MF4***-*++**-*B+*-Z E01
(5) Manufacturer:
(6) Address:
(7)
(8)
(9)
(10)
( 11)
(12)
DEKRA EXAM GmbH Bochum, dated 2014-12-05
Signed: Schumann
Certification body
Signed: Dr. Eickhoff
Special services unit
Page 1 of 4 to DMT 02 ATEX E 0631 N3
\' '
This certificate may only be reproduced in its entirety and without change. DEKRA EXAM GmbH Dinnendahlstrasse 9 44809 Bochum Germany Phone +49.234.3696-105 Fax +49.234.3696-110 zs-exam@dekra.com
~· ~ w c L\
(13) Appendix to
(14) 3rd Supplement to the EC-Type Examination Certificate DMT 02 ATEX E 063
(15) 15.1 Subject and type Pressure transmitter SITRANS P MS/DSlll/DSlll-** type 7MF4***-*++**-*B+*Z E01
Pilot indicator circuit (terminal: plug-in connector) instruments
ui li pi
Lo Co
L
= = =
llB = 1.0 = 50
Measuring cell-circuit internal, no external interface
Page 2 of 4 to DMT 02 ATEX E 063 / N3
mH nF
This certificate may only be reproduced in its entirety and without change. DEKRA EXAM GmbH Dinnendahlstrasse 9 44809 Bochum Germany Phone +49.234.3696-105 Fax +49.234,3696-110 zs-exam@dekra.com
SITRANS P-DSlll-PA Profibus- PA (terminals 7+ and 8-)
Pilot indicator circuit
Category 20 SITRANS P MS and SITRANS P DSlll
Auxiliary energy-/
1 .' max. power consurnpti0n
Pilot indicator circuit Measuring cell-circuit
SITRANS P-DSlll-FF Auxiliary energie-/ output signal circuit (terminals: +,-)
in type of protection lntrinsic Safety Ex ia llC/llB only for connection to a certified circuit · (e.g. FISCO supply unit) with maximum values accordin to the followin table:
FISCO-supply unit Linear barrier ia
llC/llB 17.5
380 5.32
FISCO-supply unit ia/ib for group llB/llC
U"
'" Pa
Li= 7 µH Ci= 1.1 nF
17.5 V 380 mA
5.32W
linear barrier ia/ib for group llB/llC
24 V 250 mA
1.2W
Page 3 of 4 to DMT 02 ATEX E 063 / N3 This certificate may only be reproduced in its enlirety and without change.
DEKRA EXAM GmbH Dinnendahlstrasse 9 44809 Bochum Germany Phone +49.234.3696-105 Fax +49.234.3696-110 zs-exam@dekra.com
•• ' ..
(16)
(17)
Simulation interface (terminals X103, installing pins 11, 12, 15, 16)
in type of protection lntrinsic Safety Ex ia llC only for connection to test instruments when the equipment, pins 15 an 16 shall be bridged during operation
maximum values Ui = 6 V pi= 1.2 w Ri = 750 0 U0 = 5.5 0 10 = 12 mA
Thermal data
Permitted ambient temperature
Maximum surface temperature T
None
Certification body
Page 4 of 4 to DMT 02 ATEX E 063 I N3 This certificate may only be reproduced in its entirety and without change.
DEKRA EXAM GmbH Dinnendahlstrasse 9 44809 Bochum Germany Phone +49.234,3696-105 Fax +49.234.3696-110 zs-exam@dekra.com
...
(1)
(2)
(3)
(4)
Translation
4th Supplement to the EC-Type Examination Certificate Equipment and protective systems intended for use
in potentially explosive atmospheres - Directive 94/9/EC
Supplement accordant with Annex III number 6
No. of EC-Type Examination Certificate: DMT 02 ATEX E 063
Equipment:
(5) Manufacturer:
(6)
(7)
(8)
(9)
(10)
( 11)
(12)
Supplied intrinsically safe
G II 1 D Ex ta lllC T120°c Da II 1 /20 Ex ta/tb lllC T120°c Da/Ob
DEKRA EXAM GmbH Bochum, dated 2015-05-11
Signed: Schumann
Certification body
Page 1 of 4 of DMT 02 ATEX E 063 / N4
Signed: Dr. Wittler
Special services unit
This certificate may only be reproduced in its entirety and without any change.
DEKRA EXAM GmbH, Dinnendahlstrasse 9, 44809 Bochum, Germany,
telephone +49.234.3696-105, Fax +49.234.3696-110, zs-exam@dekra.com
(13)
(14)
(15)
Appendix to
4th Supplement to the EC-Type Examination Certificate OMT 02 ATEX E 063
15. 1 Subject and type
Pressure transmitter SITRANS P DSlll Type 7MF4 ***-*++**-*B+*-Z +E01
[ 33 - DSlll version with HART 34 - DSlll version with Profibus PA 35 - DSlll version with Fieldbus Foundation
0 - relative pressure 1 - plain membrane 2 - absolute pressure 3 - absolute pressure 4 - difference pressure 5 - difference pressure 6-level
0 - relative pressure 1 - plain membrane 2 - absolute pressure 3 - absolute pressure 4 - difference pressure 5 - difference pressure 6-level
The digits which have not been explained are not relevant for the explosion protection .
Page 2 of 4 of DMT 02 ATEX E 063 / N4 This certificate may only be reproduced in its entlrety and without any change.
DEKRA EXAM GmbH, Dinnendahlstrasse 9, 44609 Bochum, Germany,
telephone +49.234.3696-105, Fax +49.234.3696-110, zs-exam@dekra.com
~ ~ LLI Q
L\
15.2 Description
The reasons for this supplement are changed type designations and a revised version of the
electrical parameters. The assessment of the electronics is part of PTB 13 ATEX 2007 X.
15.3 Parameters
Electrical data
Category 1 D resp. 1 /20
FISC9-supply unit ~inear barrier
Pilot indicator circuit
ia , llC
Ua [VJ 17.5 In rmA] 380 Pa[WJ 5.32
Li = 7 µH C1 = 1.1 nF
SITRANS P DSlll, SITRANS P410, SITRANS P310 - version with HART
Page 3 of 4 of DMT 02 ATEX E 063 / N4
This certificate may only be reproduced in its entirety and without any change.
DEKRA EXAM GmbH, Dinnendahlstrasse 9, 44809 Bochum, Germany,
telephone +49.234.3696-105, Fax +49.234.3696-110, zs-exam@dekra.com
ia llC 24
174 1
...
Categorv 20
SITRANS P DSlll, SITRANS P410, SITRANS P310-version with HART
Auxiliary energy-/ output signal circuit (terminals: +,-) DC 10.5„.45 V
Max. power consumption 1.2W
SITRANS P DSlll, SITRANS P410, SITRANS P310 -version with PNFF
Auxiliary energy-/ output signal circuit (terminals: +,-) DC 9 .. . 32 V
Max. power consumption 1.2W
Thermal data permitted ambient temperature
maximum surface temperature T
Degrees of protection according to EN ~0929
(16) Test and Assessment Report ~ BVS PP 02.2033 EG as of 20 1 5 .:05~1~
( 17) Special conditions for safe use
None
Certification body Special services unit
Page 4 of 4 of DMT 02 ATEX E 063 / N4
This certificate may only be reproduced in its entirety and without any Change.
DEKRA EXAM GmbH, Dinnendahlstrasse 9, 44809 Bochum, Germany,
telephone +49.234.3696-105, Fax +49.234.3696-110, zs-exam@dekra.com