Post on 27-Jan-2021
5. Logging in by Azure AD Certification
Guide for Configuring the INAZUMA Certified Systems - S-PAS Product compliance
INAZUMA Head Office of Sony
Overview
0. Getting StartedTo be read in using the INAZUMA Certified Systems
Preparation
1. Receiving the user registration noticeAn e-mail notices the user when registration application has been accepted.
2. Installation of the Client CertificateClient Certificate is checked by the System for proving your PC identity upon using the System.
3. Preparation for Azure AD CertificationGoing through tasks needed in advance for Azure AD Certification
Connecting to the INAZUMA Certified Systems
4. SSL-VPN ConnectionSSL-VPN is an encrypted communication network.
5. Logging in to the target SystemHow authentication by Azure AD Certification operates
Agenda
Explanation Scope on this document
5. Azure AD CertificationAbout how to use Azure AD Certification
Contents
5. Azure AD Certification
(Blank Page)
Instructions on logging in to the INAZUMA Certification Systems by Azure AD Certification
Overview
[ Precondition ]
Steps
Tip
• If you are logging in for the first time, type the ID (e.g. e-mail address) that has been registered.
• As Azure AD Certification Login functions by “Single-Sign-On,” this screen will not be shown if you are already logged in.
(Azure AD Certification page)
Select the already registered mail address. Enter your password if requested.
5. Azure AD CertificationAbout how to use Azure AD Certification
Click the URL of the INAZUMA Certified Systems you would like to login to.(Check URL in Appendix)
End of Guide of Login through Azure AD Certification(Your target System top page –sample-)
- E-mail address is to be registered- Establishment of SSL-VPN Connection
(Not required for all systems )- Completion of preparation for Azure AD
Certification
1. The Azure AD Certification page is displayed when accessing the system through its URL.
2. Select the already registered mail address. Enter your password if requested.
Preparation and Login(S-PAS Product Compliance )
Preparation and Login(S-PAS Product Compliance )
The two browsers below are the only browsers that support S-PAS.1. IE (Ver. 11) Browser2. Google Chrome Browser
The following preparations are necessary before usage of the System.(This section is described by Internet Explorer as an example.)
Preparations1. Set up Browser’s security info. (S-PAS site registration as trusted site)2. Set up Azure AD Certification. (Reset sign-in info.)3. Clear browser cache.
Login to S-PAS (via Azure AD Certification)
5
S-PAS Login
Preparation1. Set up Browser’s security info.
(Register S-PAS site to trusted site info.)Click
[Internet Option]2Click
[Internet Option]2Click
[Security] Tab3Click
[Security] Tab3Click
[Tool Mark]1Click
[Tool Mark]1Click [trusted site]Then Click [Site]4
Click [trusted site]Then Click [Site]4
Enter S-PAS URL, if not registered.5
Enter S-PAS URL, if not registered.5
Click [Add]6 Click [Add]6
2. Set up Azure AD Certification (Open browser, access the following URL and reset Azure AD Certification.)
https://myapps.microsoft.com
Click[Person Mark]1
Click[Person Mark]1
Click[Person Mark]2
Click[Person Mark]2
Click [Sign OutFrom All]4
Click [Sign OutFrom All]4
Click[Profile]3
Click[Profile]3 Click [OK]5 Click [OK]5
*1S-PAS URLhttps://www.productcomp.sony.biz
3. Clear browser cache
Preparation
Click[Tool Mark]6
Click[Tool Mark]6
Click [Internet Option]7
Click [Internet Option]7
Click [AccessHistory Delete]8Click [Access
History Delete]8 Click [Delete]10 Click [Delete]10
Access History is Deleted
「Do Not Check[Preserve Favorites website data]9「Do Not Check[Preserve Favorites website data]9
Login to S-PAS is as follows.
Login to S-PAS (via Azure AD Certification)
Click [Mail Address]2 Click [Mail Address]2 S-PAS Product Compliance Initial ScreenEnter S-PAS URL1 Enter S-PAS URL1
*1S-PAS URLhttps://www.productcomp.sony.biz/productcomp/index.html
When you cannot login toS-PAS Product Compliance KENGAI
When you cannot login toS-PAS Product Compliance KENGAI
When you cannot login to S-PAS KENGAI■ Confirm and Reset
1. Browser’s security info. (S-PAS site registration to trusted site info.)2. Azure AD authentication info. (Reset sign-in info.)3. Browser cache (Clear cache of browser)
■ S-PAS Login (Use Azure AD Certification)
■ Solutions when login is unavailable with options above4. Azure AD Certification Reset (Option 2 Above)5. Browser Cache Clear (Option 3 Above)6. PC Restart
■ S-PAS Login (Use Azure AD Certification)
The two browsers below are the only browsers that support S-PAS.1. IE (Ver. 11) Browser2. Google Chrome Browser
The following preparations are necessary before usage of the System.(This section is described by Internet Explorer as an example.)
Preparations1. Set up Browser’s security info. (S-PAS site registration as trusted site)2. Set up Azure AD Certification. (Reset sign-in info.)3. Clear browser cache.
Login to S-PAS (via Azure AD Certification)
11
S-PAS Login
Confirm and Reset1. Set up Browser’s security info.
(Register S-PAS site to trusted site info.)Click
[Internet Option]2Click
[Internet Option]2Click
[Security] Tab3Click
[Security] Tab3Click
[Tool Mark]1Click
[Tool Mark]1Click [trusted site]Then Click [Site]4
Click [trusted site]Then Click [Site]4
Enter S-PAS URL, if not registered.5
Enter S-PAS URL, if not registered.5
Click [Add]6 Click [Add]6
2. Set up Azure AD Certification (Open browser, access the following URL and reset Azure AD Certification.)
https://myapps.microsoft.com
Click[Person Mark]1
Click[Person Mark]1
Click[Person Mark]2
Click[Person Mark]2
Click [Sign OutFrom All]4
Click [Sign OutFrom All]4
Click[Profile]3
Click[Profile]3 Click [OK]5 Click [OK]5
*1S-PAS URLhttps://www.productcomp.sony.biz
3. Clear browser’s cache
Confirm and Reset
Click[Tool Mark]6
Click[Tool Mark]6
Click [Internet Option]7
Click [Internet Option]7
Click [AccessHistory Delete]8Click [Access
History Delete]8 Click [Delete]10 Click [Delete]10
「Do Not Check[Preserve Favorites website data]9「Do Not Check[Preserve Favorites website data]9
Access History is Deleted
Login to S-PAS is as follows.
Login to S-PAS (via Azure AD Certification system)
Click [Mail Address]2 Click [Mail Address]2Enter S-PAS URL1 Enter S-PAS URL1
*1S-PAS URLhttps://www.productcomp.sony.biz/productcomp/index.html
S-PAS Product Compliance Initial Screen
AppendixAppendix
Appendix Access to INAZUMA Certified Systems
System Certification Type URL
S-Cabinet v2 (Inside Japan) Azure AD Certification https://s-cabinet.inazuma.sony.co.jp/v2/jsp/index.jsp
S-Cabinet v2 (Outside Japan) Azure AD Certification https://s-cabinet2.inazuma.sony.co.jp/v2/jsp/index.jsp
S-PAS KENGAI Azure AD Certification https://www.s-pas.sony.biz/3dspace/
S-PAS Product ComplianceKENGAI Azure AD Certification https://www.productcomp.sony.biz/productcomp/index.html
Elephant (JIRA Included) Azure AD Certification https://www.tool.sony.biz/
Login to each INAZUMA Certified System from the URL below.
Revision History
Revision History
Date Ver. Contents for change Editor2019/10/23 1.0 First issue S-PAS Office
E.O.F.E.O.F.