Post on 06-Apr-2018
8/3/2019 3240E Skid Steer
1/50
1
INTRODUCING E-Series 3640E / 4240E
PRODUCT FEATURES AND SPECIFICATIONS
8/3/2019 3240E Skid Steer
2/50
2
NEW AND IMPROVED COMPACT-SIZE SKID
LOADERS WITH EXCEPTIONAL POWER, EXCELLENT
OPERATING LOAD RATINGS, LIFTING HEIGHTS AND
PERFORMANCE, AND VERY GOOD HYDRAULIC
CAPABILITIES FOR ATTACHMENT PERFORMANCE.
INTRODUCING E-Series 3640E / 4240E
8/3/2019 3240E Skid Steer
3/50
3
NEW E-Series 3640E / 4240E
New model 3640E replaces the 3635, and new model 4240E replacesthe 3935.
Tier II emissions-certified Yanmar TNV-Series diesel engines
3640E - 35 hp 3-cylinder
4240E - 46 hp 4-cylinder
Higher SAE Rated Operating Load on the 4240E
3640E remains 1,050 lbs. (476 kg) or 1,175 lbs. ( 532 kg)with optional counterweight (factory or field installed)
4240E 1,350 lbs. (612 kg) or 1,475 lbs. (669 kg) with optionalcounterweight (factory or field installed)
Higher auxiliary hydraulic flows
3640E 14.5 gpm (55 L/min)
4240E 16.5 gpm (62 L/min)
MODEL FEATURES
8/3/2019 3240E Skid Steer
4/50
4
NEW E-Series 3640E / 4240E
NEW FEATURES
New 4240E has 9 more horsepower and is now a 4-cylinder engine;
higher lift capacity than previous 3935.
New 3640E is lighter weight for easier transport, better performance,less tire wear and easier turning. Unit now available as narrow as 48inches wide.
Improved rear door with more robust hinges and deeper recessed
taillights for improved protection. Improved tilt cylinders with stronger design, without cushioning.
New 4240E 8-bolt axles standard (uses common tires from 4640E).
Heavier axle seals on both models; guard plates are no longer needed.
Increased strength axle housings with additional support structure tobase chassis.
New steel fuel tanks higher capacities.
8/3/2019 3240E Skid Steer
5/50
5
NEW E-Series 3640E / 4240E
New engine cover designed to open independently of rear door.
Improved strength All-Tach quick-attach system.
New air cleaner and hydraulic filter systems (hydraulic filter is acommon part already in service parts system).
Base units now structured without hydraulic self-leveling orfenders available as factory or field options.
Improved drive controls with reduced control efforts approximately25% less effort for less fatigue in driving and turning the loader.
New optional sound package available to reduce operator noise levels.
New standardized ignition switch and key (same as other newE-Series loaders).
New style rearview mirror option (same as other new E-Series).
NEW FEATURES
8/3/2019 3240E Skid Steer
6/50
6
NEW E-Series 3640E / 4240E
Common ROPS/FOPS enclosure, Level II-certified. Compact, yetgood operator space, comfort and protection.
Smooth-line appearance main chassis with eye appeal modern product graphics for good overall appearance.
Gun metal" gray color, common with all skid loader and compacttrack loader models.
Easy-to-use entry/exit handholds inside andoutside of ROPS/FOPS for safe, easy entry
and exit from the operators compartment.
New gray-colored, high-back cushion seat is
standard equipment; deluxe, gray-coloredfull-suspension seat is optional.
Seat belt adjustable and retractable.
FEATURES
8/3/2019 3240E Skid Steer
7/50
7
NEW E-Series 3640E / 4240E
FEATURES
Top and rear windows to prevent dirt and rain entry from top andrear areas of ROPS, and to lower operator noise levels.
New 4240E larger engine radiator and hydraulic oil cooler for
increased engine and hydraulic oil cooling.
Control options for operator preference Hands-only Gehl T-Baror Hand/foot controls.
Operator restraint bar with armrests safety for operator, plusadded comfort.
Instrumentation simple eye-level, right side instrumentation forquick monitoring. Panel is angled for better operator viewing.
Headliner and acoustic material interior standard equipment.
8/3/2019 3240E Skid Steer
8/50
8
NEW E-Series 3640E / 4240E
Operational lights 2 front, 2 rear, 2 tail lights.
All-Tach attachment mounting system (universal-style quick-attach).
Powerview lift arm high-strength, radial-lift design provides for
excellent side visibility. Hydraulic line protection built into lift arm
structure. Hydraloc System safety lockout system.
Zero-maintenance axles no need for adjustments or lubrication.
Manually-controlled hydrostatic drive.
Dual hydraulic lift and tilt cylinders with NitroSteel cylinder rods.
FEATURES
8/3/2019 3240E Skid Steer
9/50
9
NEW E-Series 3640E / 4240E
1050 lbs. (476 kg) Rated Operating Load (SAE)
[1175 lbs. (532 kg) with optional counterweight]
35 hp (26 kW) diesel engine 3-cylinder
Wheelbase 34.5 inches (876 mm)
High lift height 108 inches (2746 mm)
ROPS/FOPS Level II with comfortable seat, operator restraint bar
Auxiliary hydraulics 14.5 gpm (55 L/min) flow
KEY FEATURES / SPECIFICATIONS
8/3/2019 3240E Skid Steer
10/50
10
NEW E-Series 3640E / 4240E
1350 lbs. (612 kg) Rated Operating Load (SAE)[1475 lbs. (669 kg) with optional counterweight]
46 hp (34 kW) diesel engine 4-cylinder
Wheelbase 36.7 inches (932 mm)
High lift height 110 inches (2794 mm)
ROPS/FOPS Level II with
comfortable seat, operator restraint bar
Auxiliary hydraulics 16.5 gpm
(62 L/min) flow
KEY FEATURES / SPECIFICATIONS
8/3/2019 3240E Skid Steer
11/50
11
NEW E-Series 3640E / 4240E
FEATURES - Chassis Wheelbase: 3640E 34.5 in. (876 mm)
4240E 36.7 in. (932 mm)
Fuel tank capacity: 3640E 10.3 gal. (38.9 L)4240E 12.4 gal. (46.9 L)
Chaincase oil drain, fill and check ports.
Hydraulic oil reservoir located on left, rear section of chassis. Simplefiller cap with built-in dipstick. Steel tank within the steel chassis with
high capacity and better heat dissipation than plastic.
Stability excellent weight distribution front-to-rear.
High commonality of parts between 3640E and 4240E.
Fenders optional on both 3640E and 4240E.
8/3/2019 3240E Skid Steer
12/50
12
NEW E-Series 3640E / 4240E
ROPS/FOPS Enclosure /
Operator Environment
Excellent visibility Sturdy ROPS/FOPS provides protection, yet
allows a wide-open view to the attachment and surrounding work
areas. ROPS/FOPS is Level II certified for even more operator
protection in the event of objects falling onto the ROPS/ FOPS
included as standard equipment.
Optional front cab door provides wiper/washer and gas-spring
assist to open door, and a sensor to lock out lift arm and bucketfunctions when door is open. Optional sliding side windows front
sections slide rearward. Optional heater/defroster factory or field
installed. New complete cab enclosure has a single stock order
number for a complete factory-installed cab package.
Safety glass rear window for lower operator sound levels, keeps
out dirt, debris and rain; and serves as emergency rear exit.
FEATURES -
8/3/2019 3240E Skid Steer
13/50
13
NEW E-Series 3640E / 4240E
ROPS/FOPS Enclosure /
Operator Environment
Handholds on outside and inside of ROPS/FOPS to assist and provide
for easier entry/exit of the operators compartment. Steel, slip-resistant
step design, located on lift arm, also protects tilt cylinder hydraulic lines.
New gray-colored, high-back, cushion seat is standard. Optional new
gray-colored, high-back full-suspension seat allows the operator to
adjust for leg room, and the suspension according to the operators
weight (same seats from other new E-Series loaders). Two-inch wide
adjustable and retractable seat belt is standard; three-inch belt is opt.
Operator restraint bar The restraint bar is an additional restraining
device (in addition to the seat belt) and a comfortable armrest. When in
the raised position, the restraint bar automatically engages the brakes,
and locks the lift arm, attachment movement, and auxiliary hydraulics.
FEATURES -
8/3/2019 3240E Skid Steer
14/50
14
NEW E-Series 3640E / 4240E
ROPS/FOPS Enclosure /
Operator Environment
Precision controls Customer choice of: Gehl T-Bar hands-only,
or Hand/foot with mechanical auxiliary hydraulic controls. New
low-effort design controls speed and direction control effortsreduced by approximately 25%.
T-Bar hands-only controls are very operator-friendly and leave
plenty of room for the operators feet. This control option includesa foot throttle as standard. Auxiliary hydraulics are controlled with
operators left foot. Hand/foot controls operate with two-handles
for drive/steering control, and two foot pedals for lift and tilt
functions. Right control handle moves inward/outward for auxiliaryhydraulic control.
FEATURES -
8/3/2019 3240E Skid Steer
15/50
15
NEW E-Series 3640E / 4240E
ROPS/FOPS Enclosure /
Operator Environment
Eye-level instrumentation Simple, easy-to-view/easy-to-read
instrumentation at eye level on the right side of the ROPS/FOPS
for monitoring loader system functions. Hourmeter, fuel andtemperature gauges provide for quick readings.
Warning lamp indicators for engine and hydraulic
temperature, low oil pressure and battery charge.
Panel includes:
Parking brake switch with brake indicator lamp
Switch for pre-heat for engine starting in colder
conditions
multi-position light switch
circuit breakers
FEATURES -
8/3/2019 3240E Skid Steer
16/50
16
NEW E-Series 3640E / 4240E
ROPS/FOPS Enclosure /
Operator Environment
Mounting holes for optional rearview mirrors incorporated into all
ROPS/FOPS (same mirror as used in other new E-Series loaders).
Compact-size Operator's Manual and sealed manual storagecompartment.
Each loader supplied with:
Operators Manual
Parts Manual
Safety Manual
Attachments Guide
Low overall ROPS/FOPS height 70.3 inches (1786 mm) on 3640E with standard 8.50 x 15 HD tires
71.9 inches (1826 mm) on 4240E with standard 10.00 x 16.5 HD tires
FEATURES -
8/3/2019 3240E Skid Steer
17/50
17
NEW E-Series 3640E / 4240E FEATURES Lift Arm
Rated Operating Loads increased: 4240E model - 1,350 lbs. (612 kg)
rating - an increase of 90 pounds over 3935 [3640E model retains
1,050 lbs. (476 kg) rating (same as 3635)].
Lift arm support device, in contrasting red color per ISO standard,
provided for easy engagement on extended hydraulic lift cylinder
when lift arm is raised for maintenance or service.
Most pivot pins on lift arm and hydraulic
cylinders have non-greaseable
bushings and utilize hardened steel
pins. Tilt cylinder rod ends and
All-Tach system have easy-
access grease fittings to ensure
continued lubrication in these areas.
8/3/2019 3240E Skid Steer
18/50
18
NEW E-Series 3640E / 4240E FEATURES Lift Arm
Four-point support Dual tilt cylinders and lift arm stop blocks
mounted on front of main frame spread digging forces evenly acrossthe chassis. Bucket corner load stresses are reduced, so the lift arms
and quick-attach bracket are stressed less.
Hydraulic cylinders featuring NitroSteel black-appearance,
hardened cylinder rods. NitroSteel provides superior corrosionresistance, improved wear resistance, dent resistance and increased
service life. Dual tilt cylinders provide strong breakout forces.
Hydraulic self-leveling Optional feature on new 3640E / 4240Eloaders can be ordered as factory-installed option or field-installed
option. When raising the lift arm, a pressure and flow-sensitive valvedirects flow to the bucket cylinders, keeping the attachment level
during the lifting motion. Operators can concentrate on maneuveringand lifting for fast cycle times while maintaining the load in the bucketor on pallet forks. Leveling can be manually shutoff or adjusted tooperator preference.
8/3/2019 3240E Skid Steer
19/50
19
NEW E-Series 3640E / 4240E FEATURES - Quick-Attach System
All-Tach quick-attach system permits quick interchange of
universal-type compatible attachments to increase both versatility
and productivity. The All-Tach system provides easy mounting of all
All-Tach-compatible allied attachments. The 3640E / 4240E feature
dual-lever design for engaging/disengaging the locking mechanism.
Attachments, through CEAttachments Inc., can readily be installedand used for multi-purpose compact loader duties. Many
attachments already used on larger E-Series loaders can be used on
these new models, within their capacity ratings.
Flat-faced hydraulic couplers, as found on larger E-Series models,
are the same on the new 3640E / 4240E for quick interchangeability.
8/3/2019 3240E Skid Steer
20/50
20
NEW E-Series 3640E / 4240E FEATURES - Wheel Drives
4240E features new 8-bolt, heavy-duty design axles.
2.0 in. (51 mm) diameter forged steel axles and flanges. Axles areheat-treated on new model 4240E.
Axles are zero-maintenance with sealed axle bearings no need forgreasing or maintaining oil. New heavier seal design providesexcellent sealing to retain grease and avoid dirt, debris and water fromentering, without the need for guard plates.
#80K drive chains with no idlers or adjustments required. This chain-
design is ideal for this drive system application. Chains operate in acontinuous oil bath in sealed chaincases. Design features no internalchain idlers and no external adjustments.
3640E 3640E Axle 4240E Axle/Wheel
8/3/2019 3240E Skid Steer
21/50
21
NEW E-Series 3640E / 4240E FEATURES - Brakes
Hydraloc brake system
Brakes are applied whenever the restraint bar is in the raised
position, operator is off the seat, or the key switch is turned off.
A manual on/off brake switch on the instrument panel also
activates the brakes.
Brakes are integral within drive motors. Wet-type, multiple-disc
SAHR (spring-applied/hydraulic release) brakes stop motor shaft
upon activation. Brake system requires zero maintenance.
8/3/2019 3240E Skid Steer
22/50
22
NEW E-Series 3640E / 4240E FEATURES - Rear Service Access
Large engine cover is hinged and controlled by gas spring, to
assist lifting and holding in place, and allows easy return of door
to closed/operating position.
Rear door opens easily on its hinge on the right side, whichallows for full access to engine oil dipstick, oil filler cap, air
cleaner, battery and other routine inspection and maintenance
points. (Other maintenance is performed with ROPS/FOPS in
raised position.)
Anti-vandalism protection with ability to lock rear door andengine cover by use of a single customer-supplied padlock.A separate padlock can also be applied to secure fuel cap.
Integrated, twin rear halogen work lights and tail lights standard equipment.
8/3/2019 3240E Skid Steer
23/50
23
NEW E-Series 3640E / 4240E FEATURES - Engines
Powerful, TNV-Series Yanmar diesels Tier IIemissions-certified. Engines are direct-injected, liquid-cooled designs:
3640E
3-cylinder naturally-aspirated with 35 hp(26 kW) @ 2600 rpm and 80 lb.-ft.(108 Nm) peak torque.
4240E
4-cylinder naturally-aspirated with 46 hp
(34 kW) @ 2600 rpm and 103 lb.-ft.
(140 Nm) peak torque.
Easy access to dipstick and oil fill. Initial oil and filter change required
at 50 hours; 500-hour change interval thereafter. (More frequent inmore harsh applications.)
8/3/2019 3240E Skid Steer
24/50
24
NEW E-Series 3640E / 4240E FEATURES Engines / Muffler
Easy access to air cleaner dual air filter elements.
Engine pre-heat (intake manifold heater system) controlled by
rocker switch. Pre-heat system activated when ignition key turned toon position, and pre-heat switch is held on (for time perioddependent on outside temperature).
Excellent cold-weather starting characteristics. Optional engine
block heater available for extreme cold weather starting assistance.
Muffler
3640E Muffler is mounted to engine exhaust manifold and is spark-
arrestor type.
4240E Muffler is mounted to chassis and has stainless steel flexpipe from exhaust manifold to inlet pipe to allow for flexing and tominimize pipe failures. Muffler is spark-arrestor type.
8/3/2019 3240E Skid Steer
25/50
25
NEW E-Series 3640E / 4240E FEATURES - Hydraulic System
Standard-flow auxiliary hydraulics with flat-faced hydraulic couplers
standard on both model loaders. Couplers are in a convenient
location on the upper, left side of the Powerviewlift arm, allowing
for quick coupling/uncoupling of attachment hydraulic hoses.
(Same couplers as used on other E-Series models.)
Hydraulic flow rate is adjusted by varying engine speed, and
maximized at full throttle. Theoretical auxiliary hydraulic flow 14.5 gpm (55 L/min) on 3640E and 16.5 gpm (62 L/min) on 4240E.
Main system hydraulic relief pressure is 2750 PSI (190 bar).
Auxiliary hydraulics controls: Left foot pedal on T-Bar hands-only
control units, and left/right actuation of right drive lever handle on
Hand/foot control units.
8/3/2019 3240E Skid Steer
26/50
26
NEW E-Series 3640E / 4240E FEATURES - Hydraulic System
Direct-drive hydrostatic transmission pump mounted directly to
the engine crankshaft through a special coupler connection 100%
efficient. High-capacity, gear pump provides efficient, high
pressure flow to loader and attachment. Drive mechanism requiresno adjustment and no maintenance.
Large capacity steel hydraulic reservoir located in the left, rear of
the loader chassis. Large volume results in the oil circulating
through the system less frequently, resulting in cooler oil and
component temperatures to provide optimum performance and
longer life.
Hydraulic oil filter is located at center rear, in the enginecompartment. New filter base has built-in restriction indicator to
show when filter replacement is required.
8/3/2019 3240E Skid Steer
27/50
27
NEW E-Series 3640E / 4240E FEATURES - Electrical System
High-quality ignition switch and key (same as on other E-Series).
Battery access, at right rear of loader, just inside the rear door.
Battery can be easily accessed when required. Battery disconnectswitch available as parts option.
All sealed and protected connectors.
Simple, reliable-design instrument panel is hard-wired for easy
servicing if required.
Wire harnesses include additional wiring for simple connection ofoptions when added to units in field.
8/3/2019 3240E Skid Steer
28/50
28
NEW E-Series 3640E / 4240E FEATURES - Buckets
All-Tach (universal-type) quick-attach design mounting standard equipment.
Slip-resistant, steel safety tread designed for dirt/debris to fallthrough step.
Improved strength through F.E.A. (computer) design.
New 55-inch (1404 mm) and 61-inch (1539 mm) dirt/construction
buckets with high-back spill guard rear design to allow bettercontainment of material in buckets.
Select buckets feature a bolt-on replaceable cutting edge asoptional equipment. (Add-on bolt-on edges, or weld-on edges
also available through Service Parts Department. Tooth barsavailable through CEAttachments Inc.)
Bucket options available: Dirt/construction buckets withspillguards built in, utility, snow buckets.
8/3/2019 3240E Skid Steer
29/50
29
NEW E-Series 3640E / 4240E FEATURES - Specifications
1 Operating load (capacity) rated for 3640E with 55 in. (1397 mm) - 10.5 ft.3 (0.3 m3) dirt/construction bucket;4240E with 61 in. (1550 mm) - 11.7 ft.3 (0.3 m3) dirt/construction bucket, in accordance with SAE J818.
2 3640E equipped with 27 x 8.50 x 15 tires; 4240E equipped with 10.00 x 16.5 tires.
Loader Specifications 3640E 4240E
Operating Weight2
4000 lbs. (1814 kg) 4600 lbs. (2087 kg)
Shipping Weight2
3515 lbs. (1594 kg) 4065 lbs. (1844 kg)
Rated Operating Load1
(capacity) 1050 lbs. (476 kg) 1350 lbs. (612 kg)
Rated Load w/Opt. Weight Kit1
1175 lbs. (532 kg) 1475 lbs. (669 kg)
Engine
Make Yanmar Yanmar
Model 3TNV88-XMS2 4TNV88-XMS2
Displacement 100 in.3
(1.64 L) 133 in.3
(2.19 L)
Power (net) 35 hp (26 kW) @ 2600 rpm 46 hp (34 kW) @ 2600 rpm
Peak Torque 80 ft.-lb. (108 Nm) 103 ft.-lb. (140 Nm)@ 1200 rpm @ 1200 rpm
Hydraulic System (theoretical)
Main Hydraulic System Pressure 2750 psi (190 bar) 2750 psi (190 bar)
Auxiliary Hydraulic Flow Rating 14.5 gpm (55 L/min) 16.5 gpm (62 L/min)
8/3/2019 3240E Skid Steer
30/50
30
NEW E-Series 3640E / 4240E FEATURES - Specifications
Loader Specifications (Cont.) 3640E 4240E
Electrical
Battery 12-Volt DC, 675 CCA 12-Volt DC, 675 CCA
Starter 2.3 kW 2.5 kW
Alternator 40 amp. 40 amp.
Capacities
Chaincase (each side) 8.0 U.S. qts. (7.6 L) 8.0 U.S. qts. (7.6 L)
Crankcase 7.6 U.S. qts. (7.2 L) 9.1 U.S. qts. (8.6 L)
Fuel Tank 10.3 U.S. gal. (38.9 L) 12.4 U.S. gal. (46.9 L)
Hydraulic Reservoir 8 U.S. gal. (30.3 L) 8 U.S. gal. (30.3 L)
Sound Levels (with Deluxe Sound Kit)
Sound Pressure (Operator) 85 dB(A) 85 dB(A)
Sound Power (Environmental) 101 dB(A) 101 dB(A)
8/3/2019 3240E Skid Steer
31/50
31
NEW E-Series 3640E / 4240E FEATURES - Standard Equipment
Yanmar Liquid-cooled Diesel Engine
Choice of Two Control Types: T-Bar or Hand/Foot
All-Tach Attachment System (Universal-Type) Manually Controlled Hydrostatic Drive
PowerviewLift Arm
Dual Lift/Tilt Cylinders with NitroSteel Cylinder Rods
ROPS/FOPS-Level II-Certified Overhead Guard Top and Rear Windows ROPS/FOPS
Entry/Exit Handholds
Headliner and Acoustical Material Interior
Adjustable Standard Seat Operator Restraint Bar with Armrests
Foot (T-Bar Only) and Hand Throttle
8/3/2019 3240E Skid Steer
32/50
32
NEW E-Series 3640E / 4240E FEATURES - Standard Equipment
Eye-level, Right-side Instrument Panel:
Fuel Gauge
Engine Temperature Gauge
Hourmeter Seatbelt Indicator Lamp and Buzzer
Warning Lamps and Buzzer Engine and Hydraulic OilTemperature
Battery Charge Indicator Lamp
Low Oil Pressure Lamp and Buzzer
12-volt Accessory Plug
Dual-element Air Cleaner with Visual Indicator
Visual Hydraulic Filter Indicator
Independent Hydraulic Reservoir and Hydraulic Oil Cooler
Engine Intake Air Pre-heater Starting Assist (Manual)
8/3/2019 3240E Skid Steer
33/50
33
NEW E-Series 3640E / 4240E FEATURES - Standard Equipment
Adjustable, Retractable Seatbelt
Lift Arm Support Device
Hydraloc System Brakes and Interlock for Starter, Lift/TiltCylinders, Auxiliary Hydraulics and Wheel Drives
Dual Front and Rear Work Lights
Removable Belly Plate and Access Cover, Front Frame Cleanout Area
Anti-Vandalism Lock Provisions
Spark-Arrestor Muffler
Front Auxiliary Hydraulics with 3/4 inch Flat-Faced Couplers
Number 80K Drive Chains
Zero Maintenance Axles
Operators Manual and Safety Manual English, Parts Manual
8/3/2019 3240E Skid Steer
34/50
34
NEW E-Series 3640E / 4240E FEATURES - Optional
Horn
Deluxe Sound Package
Interior Dome Light
Lift Kit Single-point
Lift Kit Four-point
Battery Disconnect Switch
Fenders
Self-Leveling Hydraulic Lift Action
Audible Back-up Alarm Engine Block Heater
Suspension Seat
Cab Enclosure Complete:
Door
Side Windows Door Interlock
Heater-Defroster
Dome Light
8/3/2019 3240E Skid Steer
35/50
35
NEW E-Series 3640E / 4240E FEATURES - Optional
Cab Door with Wiper/Washer
Sliding Side Windows/Half-glass Side Windows
Heater/Defroster - Kit
3-inch Wide Seatbelt (for where required by law) Rearview Mirror
Engine Auto-Shutdown System
Centrifugal Air Pre-Cleaner
Strobe Light
Impact-resistant Door
Rear Counterweight (also acts as bumper and hitch)
Bucket Bolt-on Cutting Edge
Diesel Engine Exhaust Purifier (parts)
Paint Non-standard and Custom Hydraulic Coupler Kit
Manual Operators Spanish
Manual Safety Spanish
8/3/2019 3240E Skid Steer
36/50
36
NEW E-Series 3640E / 4240E Dimensional Specifications
10.5 ft3 (0.3 m3) - 55 in. (1404 mm)Bucket w/27 x 8.5 x 15 HD Tires
3640E inches mmA Overall Operation Height Fully Raised 139.6 3546B Height to Hinge Pin Fully Raised 108.1 2746
C Overall Height to ROPS 70.3 1786
D Ground Clearance to Chassis (BetweenWheels)
6 152
E Overall Length Bucket Down 114 2896
F Overall Length (Less Bucket) 88.9 2258
G Wheelbase 34.5 876
H Dump Reach @ Full Bucket Height 22.8 579
I Rollback at Ground Level 29o
J Dump Angle at Full Height 42o
8/3/2019 3240E Skid Steer
37/50
37
NEW E-Series 3640E / 4240E Dimensional Specifications
10.5 ft3 (0.3 m3) - 55 in. (1404 mm)Bucket w/27 x 8.5 x 15 HD Tires
3640E inches mmK Overall Width Less Bucket 48.4 1229
L Bucket Width Overall 55.3 1404
M Clearance Circle Rear 54.1 1374
N Clearance Circle Front (Less Bucket) 44.1 1120
O Clearance Circle Front (With Bucket) 69.4 1763
P Seat to Ground Height 32.6 828Q Rollback Angle at Full Height 99
o
R Dump Height 84.5 2146
S Departure Angle 26o
8/3/2019 3240E Skid Steer
38/50
38
NEW E-Series 3640E / 4240E Dimensional Specifications
11.7 ft3 (0.3 m3) - 61 in.(1549 mm) Bucket w/10.00
x 16.5 HD Tires
4240E inches mmA Overall Operation Height Fully Raised 141.1 3584
B Height to Hinge Pin Fully Raised 110 2794
C Overall Height to ROPS 71.9 1826
D Ground Clearance to Chassis(Between Wheels)
8.3 211
E Overall Length Bucket Down 116.2 2952
F Overall Length (Less Bucket) 91.1 2314
G Wheelbase 36.7 932
H Dump Reach @ Full Bucket Height 20.8 528
I Rollback at Ground Level 28o
J Dump Angle at Full Height 42o
8/3/2019 3240E Skid Steer
39/50
39
NEW E-Series 3640E / 4240E Dimensional Specifications
11.7 ft3 (0.3 m3) - 61 in.(1549 mm) Bucket w/10.00
x 16.5 HD Tires
4240E inches mmK Overall Width Less Bucket 52.5/58.4 1334/1483
L Bucket Width Overall 60.6 1539
M Clearance Circle Rear 58.4 1484
N Clearance Circle Front (Less Bucket) 43.4 1102
O Clearance Circle Front (With Bucket) 69.2 1758
P Seat to Ground Height 33.6 853
Q Rollback Angle at Full Height 99o
R Dump Height 86.5 2197
S Departure Angle 29o
8/3/2019 3240E Skid Steer
40/50
40
NEW E-Series 3640E / 4240E Capacities and Ratings
Operating Capacity
Description Weight 3640E 4240E
Dirt/Construction Buckets
1095 lbs.55 in./10.5 ft.3 (1397 mm/0.30 m3) 235 lbs. (107 kg)
(497 kg)
1383 lbs.(627 kg)
881 lbs.60 in./10.0 ft.3 (1524 mm/0.28 m3) 252 lbs. (114 kg)
(340 kg)
1102 lbs.(500 kg)
1082 lbs.61 in./11.7 ft.3 (1549 mm/0.33 m3) 253 lbs. (115 kg)
(491 kg)
1370 lbs.(621 kg)
Construction with High-back Buckets
1061 lbs.55.5 in./9.5 ft.3 (1410 mm/0.27 m3) 254 lbs. (115 kg)
(481 kg)
1325 lbs.(601 kg)
975 lbs.61.5 in./13.0 ft.3 (1562 mm/0.37 m3) 383 lbs. (174 kg)
(422 kg)
1214 lbs.(551 kg)
8/3/2019 3240E Skid Steer
41/50
41
NEW E-Series 3640E / 4240E Capacities and Ratings
Operating Capacity
Description Weight 3640E 4240E
Utility Buckets1061 lbs.55.5 in./13.5 ft.3 (1410 mm/0.38 m3) 313 lbs. (142 kg)
(481 kg)
1325 lbs.(601 kg)
826 lbs.61.5 in./15.2 ft.3 (1562 mm/0.43 m3) 335 lbs. (152 kg)
(375 kg)
1064 lbs.(483 kg)
795 lbs.67 in./18.4 ft.3 (1701 mm/0.52 m3) 395 lbs. (179 kg)
(361 kg)
1000 lbs.(454 kg)
Earth and Foundry Bucket
1228 lbs.61.5 in./10.9 ft.3 (1562 mm/0.31 m3) 331 lbs. (150 kg)
(557 kg)
1469 lbs.(666 kg)
Pallet Forks
15.75 in. (400 mm) Forks with 662 lbs.
Backrest (Rating per EN474-3)
470 lbs. (213 kg)
(300 kg)
838 lbs.
(380 kg)19.68 in. (500 mm) Forks with 616 lbs.
Backrest (Rating per EN474-3)
470 lbs. (213 kg)
(279 kg)
775 lbs.(352 kg)
24 in. (670 mm) Forks with 575 lbs.
Backrest (Rating per SAE 1197)
470 lbs. (213 kg)
(261 kg)
526 lbs.(239 kg)
8/3/2019 3240E Skid Steer
42/50
42
NEW E-Series 3640E / 4240E Quick Specs
LOADER MODEL
ENGINE MAKE
ENGINE MODEL
RATED HP (kW) @ 2600 rpm 35 (26) 46 (34)
DISPLACEMENT - cu. in. (L) 100 (1.6) 133 (2.2)
FUEL CAPACITY - gal. (L) 10.3 (39) 12.4 (47)OPERATING WT. - lbs. (kg) - approx. 4000 (1814) 4600 (2087)
RATED OPERATING LOAD (SAE) - lbs. (kg) 1050 (476) 1350 (612)
RATED OP. LOAD w/counterweight - lbs. (kg) 1175 (533) 1475 (669)
TIPPING CAPACITY (SAE) - lbs. (kg) 2100 (953) 2700 (1225)
BREAKOUT FORCE - lbf (kN) 2800 (12.5) 2800 (12.5)
LIFT PIN HEIGHT - in. (mm) 108.0 (2743) 110.0 (2794)
HEIGHT TO TOP OF ROPS - in. (mm) 70.3 (1786) 71.9 (1826)REACH - in. (mm)1 22.8 (579) 22.6 (574)
LENGTH W/CONST. BUCKET - in. (mm) 114 (2896) 116.2 (2951)
WIDTH -- LESS BUCKET (Flotation tire) -in. (mm) 48.4 (1229) 52.5 (1334)
WIDTH -- OVERALL WITH BUCKET - in. (mm) 55 (1397) 61 (1549)
GROUND CLEARANCE - in. (mm) 6 (152) 8.3 (211)
WHEELBASE - in. (mm) 34.5 (876) 36.7 (932)
HYDRAULIC RESERVOIR - gal. (L) 8 (30.3) 8 (30.3)
AUXILIARY HYD. OUTPUT - gpm (L/min) 14.5 (54.9) 16.5 (62.5)
AUXILIARY PRESSURE - psi (bar) 2750 (190) 2750 (190)
TRAVEL SPEED (MAX.) - mph (km/h) 6.8 (13) 6.4 (13)
DRIVE CHAIN
1 3640E - Measurements w ith 55 in. (1404 mm) Dirt/Construction bucket w ith 10.5 cu. ft. (0.3 m3) capacity.
1 4240E - Measurements w ith 61 in. (1549 mm) Dirt/Construction bucket w ith 11.7 cu. ft. (0.33 m3) capacity.
4240E
#80K
Yanmar
#80K
4 TNV 88
3640E
Yanmar
3 TNV 88
8/3/2019 3240E Skid Steer
43/50
43
NEW E-Series 3640E / 4240E Reference Section
8/3/2019 3240E Skid Steer
44/50
44
NEW E-Series 3640E / 4240E Quick Features
1050 lbs. (476 kg) Rated Operating 1350 lbs. (612 kg) Rated OperatingLoad (without counterweight) Load (without counterweight)
35 hp (26 kW) Yanmar Diesel Engine 46 hp (34 kW) Yanmar Diesel Engine
14.5 GPM (54.9 L/min) Auxiliary 16.5 GPM (62.5 L/min) Auxiliary
Hydraulic Output -- For Better Hydraulic Output -- For Better
Attachment Productivity Attachment ProductivityFlat-faced auxiliary couplers - (same as Flat-faced auxiliary couplers - (same asother 40E-Series) (No Hi-flow available.) other 40E-Series) (No Hi-flow available.)
No-Maintenance, Direct-Drive Coupler -- No-Maintenance, Direct-Drive Coupler --
Engine-to-Hydro Pumps Engine-to-Hydro Pumps
Two Drive/Hydraulic Control Options: Two Drive/Hydraulic Control Options:
Gehl T-Bar (Hands-Only) Controls Gehl T-Bar (Hands-Only) ControlsHand/Foot Controls Hand/Foot Controls
All-Tach Universal-Type Quick-Attach All-Tach Universal-Type Quick-AttachSystem System
MODEL 3640E
DESIGN FEATURESMODEL 4240E
DESIGN FEATURES
8/3/2019 3240E Skid Steer
45/50
45
NEW E-Series 3640E / 4240E Quick Features
Ins trumentation - Eye-Level, Ins trumentation - Eye-Level,
Easy-View Fuel and Engine Easy-View Fuel and EngineTemperature Gauges, Hourmeter, Temperature Gauges, Hourmeter,and Warning Lamps and Warning Lamps
Compact Size - As Narrow as 48 in. Compact Size - As Narrow as 55 in.
Low Overall Height - 70.3 in. Low Overall Height - 71.9 in.
Large Swing-Open Rear Door, Tip-Up Large Swing-Open Rear Door, Tip-Up
Engine Cover, Tip-Back ROPS/FOPS Engine Cover, Tip-Back ROPS/FOPSwith Gas-Spring Assis t for Service Ease with Gas-Spring Ass ist for Service Ease
Roomy, Comfortable Operator's Roomy, Comfortable Operator's
Compartment and Seat. Suspension Compartment and Seat. SuspensionSeat Optional. Restraint bar w/Armrests. Seat Optional. Restraint bar w/Armrests.
Powerview
Lift Arm -- Good Side View Powerview
Lift Arm -- Good Side View
Dual, Heavy-Duty Lift and Tilt Cylinders -- Dual, Heavy-Duty Lift and Tilt Cylinders --For Strong Breakout Force. NitroSteel For Strong Breakout Force. NitroSteelCylinder Rods Cylinder Rods
Lift Height = 108 in. (2743 mm) -- For Lift Height = 110 in. (2794 mm) -- ForGood Dump and Reach Action Good Dump and Reach Action
MODEL 3640E
DESIGN FEATURESMODEL 4240E
DESIGN FEATURES
8/3/2019 3240E Skid Steer
46/50
46
NEW E-Series 3640E / 4240E Maintainability Features
Rear door/engine cover access:
Air filters
Engine oil/hydraulic oil cooler
Engine oil dipstick Engine oil filler cap
Hydraulic oil filler cap/dipstick
Battery
Engine oil filter
Hydraulic oil filter Fuel filter
Under ROPS/FOPS access:
Full ROPS/FOPS tip-back for internal components access.
(ROPS/FOPS is gas-spring assisted for easier tip back andreturn.)
Ease of access for maintenance, cleaning and service.
8/3/2019 3240E Skid Steer
47/50
47
NEW E-Series 3640E / 4240E Maintainability Features
Chassis:
No chain adjustments. No chain idlers. Fill, check and
drain of chaincases.
Large inspection covers for chaincases.
Access pan plates: Two plates, one front, one rear for easy
removal and easy handling, to allow access and cleanout
under engine and chassis. Front plate for access to
hydraulics; rear plate for access to engine oil drain.
Engine:
Engine requires oil changes/engine oil filter changes only
at 500-hour intervals. (Initial oil change at 50 hours.)
Direct-injection for easier starting and better cooling.
8/3/2019 3240E Skid Steer
48/50
48
NEW E-Series 3640E / 4240E Serviceability Features
Instrument panel gauges and lamps are individually replaceable.
Unitized drive motor/brake assemblies.
Large chaincase covers for easier access.
Full tip-back ability of ROPS/FOPS enclosure allows for easy accessto internal hydraulic components as needed. Raising and locking oflift arm in full-height position allows for additional repair access as
necessary.
Bushed hydraulic cylinders and pivotswith hardened pins. Limited numberof pivot points require greasing.
Bushings are replaceable.
Easy access to filters.
8/3/2019 3240E Skid Steer
49/50
49
NEW E-Series 3640E / 4240E Changes From Previous Series
3640E / 4240E 3635 / 3935
Yanmar TNV-Series engines - Tier II-certified Yanmar TNV-Series engines - Tier II-certified
3640E 3-cyl. - NA - 35 hp @ 2600 rpm / 80 ft.-lbs. 3635 3-cyl. - NA - 36 hp @ 3000 rpm / 77 ft.-lbs.
4240E 4-cyl. - NA - 46 hp @ 2600 rpm / 103 ft.-lbs. 3935 3-cyl. - NA - 36 hp @ 3000 rpm / 77 ft.-lbs.
500 hour oil/filter change interval (50 hr. initial) 250 hour oil/filter change interval (50 hr. initial)
Rated operating load
3640E 1050 lbs. (1175 lbs. w/weight kit) 3635 1050 lbs. (1150 lbs. w/weight kit)
4240E 1350 lbs. (1475 lbs. w/weight kit) 3935 1260 lbs. (1360 lbs. w/weight kit)
Operating weight
3640E 4000 lbs. 3635 4400 lbs.
4240E 4600 lbs. 3935 4600 lbs.Dump reach
3640E 22.6 in. 3635 22.8 in.
4240E 22.8 in. 3935 25 in.
Overall length w/ bucket
3640E 114 in. 3635 114 in.
4240E 116 in. 3935 117.9 in.Ground speed
3640E 6.8 mph 3635 7 mph
4240E 6.4 mph 3935 7 mph
(Single-speed drive only) (Single-speed drive only)
8/3/2019 3240E Skid Steer
50/50
50
NEW E-Series 3640E / 4240E Changes From Previous Series
3640E / 4240E 3635 / 3935
3640/4240 Feat-Spec PPT 11/05 kpm/jh
Auxiliary hydraulic flow
3640E 14.5 gpm 3635 14.4 gpm
4240E 16.5 gpm 3935 14.4 gpm
Fuel tank capacity3640E 10.3 gal. 3635 8.5 gal.
4240E 12.4 gal. 3935 8.5 gal.
Steel tank Plastic tank
Axles3640E 6-bolt HD axle 3935 and 3695 standard 6-bolt axle
(uses same wheel/tires as 3635)4240E 8-bolt HD axle(uses same wheel/tires as 4640)
Hydraulic filtration
4-micron (Finer hydraulic oil filtration) 7-micron
Hydraulic self-leveling
Factory or field opt. Standard eq.
Fenders Factory or field opt. Standard eq.
New ignition switch/key common w/E-Series Switch/key from original 40-Series