Post on 09-Jul-2020
http://lintronic.dk
LINTRONIC RELAY 208
RELAY 208
LinTronic
Updated: 190105
http://www.lintronic.dk
LINTRONIC RELAY 208
Date Revisedyymmdd Text
180731 Added RS232 control of new 8-channel relay box
130622 Added Speaker control
130317 Operation of the RELAY 208 in separate document.
101125 Improved drawings showing control of 15 relays
100520 Remote controlled fireplace added
091208 Curtains drawings added
091110 COMBO configuration introduced in firmware version 001.034.036.
091008 RELAY 208 as CommandConverter: http://www.lintronic.dk/CommandConverter.pdf
090923 Various drawings added/improved.
090920 Mode 5 (digital input controlled)
090618 Wholes corrected to holes. Thanks, Kaavya :o)
090610 Mode 5 added. Special firmware. Not customer programmable.
http://www.lintronic.dk
LINTRONIC RELAY 208
RELAY 208 was obsoleted in 2013.
Since then we have frequently received many requests for analternative we have now found a reliable 8-channel relay box,that can be controlled by RS232.
https://sigma-shop.com/product/9/rs232-serial-com-controlled-eight-channel-relay-board-12v-box.html
From software version 001.034.069, we have now copied thesoftware functionality from the original RELAY 208 into theTT455-RT-238.
This means you can:- buy the above relay online- connect the relay to the TT455-RT-238- configure the timing and operation in the configurator- operate the relays by the B&O remotes colors- operate the relays by the B&O remotes numbers- activate and forget: the relays will automatically turn off as configured by you
Perfect for control of electrical:- curtains, shades, blinders- motors, lifts, light- etc.
http://www.lintronic.dk
LINTRONIC RELAY 208
RELAY 208 INCLUDES:
ACCESSORIES
MODE
PICTURES
- 1 pcs polycarbonat cabinet -10 pcs wire-plugs (PG7)- 8 pcs 3-way screw-terminals (relays)- 1 pcs 5-way screw-terminal (dig input, RS485) -1 pcs 2-way screw-termainal (power)
Depending on your installation, you mayneed in addition:- a power supply (12 volt, minimum 300 mA) -a communication cable for configuration- IR receiver(s)
At delivery RELAY 208 is configured for mode: BEOLIVING-2This is easily changed in the free of charge Configuration program available on our web-site.
When the installation is running, LinTronic would appreciate a picture and a few lines explaininghow you use the RELAY 208. Also we would be happy if we could use your picture and story inour next NewsLetter inspiring other customers.
RELAY 208
http://www.lintronic.dk
LINTRONIC RELAY 208
Customer configurable
Each of the two IR receivers inputs may optionally:
Control the relays. Example: Control lights/curtains/blinders from two rooms. senda command holding the decoded IR signal to the any of the two commportsExample: Control a computer, a TT455-RT-238, etc.
Each of the two commports may optionally:
Control the relays. Example: From a computer, a TT455-RT-238, etc.Copy LinTronic protocols commands to the other commportExample: Control relays and a TT455-RT-238 on each commport,or let a computer control the relays and a TT455-RT-238 on the other commport.
These combinations offers a wide range of possibilites:
Two TT455-RT-238's may work together through a RELAY 208 offering remote control of RELAY 208 or ecah ofthe TT455-RT-238's from up to 4 rooms (or many more if you use the commports RS485 interface).Control both RELAY 208 and computer from up to 3 rooms (or many more if you use the commports RS485interface).The RELAY 208 may also work as a "communication converter" translating one set of commands into anotherset of commands working on the same or a different baudrate, even a different protocol.Get the most of of your RELAY 208. LinTronic offer customized software.
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
455 KHz receiver (AMX, B&O, etc.)
32 - 56 KHz receiver
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
OEM ready
COMPUTER /CONTROLLER
Other systems:Light, projectors,screens, etc.
RELAY 208 is designed to meet our customersneeds.
Simply tell us what you need and we make it happen:Want to use a special remote control ?Send detected codes to your computer ?Control from a computer ?Activated from a wall switch ?
Also see this document:http://www.lintronic.dk/CommandConverter.pdf
http://www.lintronic.dk
LINTRONIC RELAY 208
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
RELAY 208
Commport 2TT455-RT-238Computer, etc.
IR receiver 1IR receiver 2 Reserved
8 switching relays- 12 vac/vdc- 24 vac/vdc- 48 vac/vdc- 115 Vac- 230 vac
Digital inputsRS485Power
Commport 1Computer,TT455-RT-238,etc.
2 commports. Optionally connect one computer and one TT455-RT-238 or two
COMMPORT2 optional RS232 or RS4852 individual IR receivers. Control your computer, RELAY 208 and/or TT455-RT-238 from
Heavy-duty high-voltage switching relays. Now you may control high voltage lamps or
TT455-RT-238's, or two computers, etc. etc.
up to 4 rooms.
blinds etc. directly from the RELAY board. LED'sindicators on each relay and digital inputs.
BeoSystem Theater Detector.2 digtal inputs
Controls your lights, curtains, projector, etc.. Switch activated open/close all, etc.
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
1 2 3
C A R C A R C A R C A RC A R C A R C A R C A R
1 2 3 45 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
Connectors can be mounted horizontically or vertically
Default jumper position 2-3. 1-2 = RS485, 2-3=RS232
1 2 3
Pointsofinterest
http://www.lintronic.dk
LINTRONIC RELAY 208
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
Power supply
EURO plug
220 vac 50 Hz
1.5V 12V
Set power-adaptorfor 12 volt
If you use our PowerAdap-002then cut off the connector andfeed the black wireto 12 volt ground and theblack-white wire to 12 volt +.
http://www.lintronic.dk
LINTRONIC RELAY 208
Switches and LED's
1: COMMUNICATION RESET (only possible during power-up)In order to set default communication for both commports (address = 1 and baudrate = 19200,n,8,1): -press and hold this switch- apply power- wait for both LED indicators to turn on- release switch Heartbeat indicator
- blinks every second to confirm firmware is running
2: PROGRAMMINGIn some modes this switch can be used to adjust timing, etc.
OBSERVE:If you hold this switch activated during power-up, then LED 2 will turn on, indicating that you are about to enterour factory test-program. The test procedure is carried out by our production and is not public available. Simply releasethe switch and continue normal operation. If you want to test RELAY 208, then please do it in the Configurator.
Programming indicator
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
Switches and LED's
Heartbeat indicator- blinks every second to confirm firmware is running
Mode: 1-32, Curtains Up/Down
Test ALL UP
Test ALL DOWN
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
Switches and LED's
Heartbeat indicator- blinks every second to confirm firmware is running
Mode: 1-64, Individual On/Off
Test ALL ON/OFF
Test ALL OFF
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
Relays
Common
Restingconnection to Common whenrelays is resting(also called Normally Closed)
Activatedconnection to Commonwhen relays is activated(also called Normally Open)
"Relay activated" indicator
All 8-relays are workingin the same way. This is oneexample covering all.
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
C A R
http://www.lintronic.dk
LINTRONIC RELAY 208
Digital inputsMode: 1-32, Up/Down
Input 1, can be controlled a normal switch or a dusk/dark sensor:Off, closes all curtains.On, Opens all curtains.
Input 2, can be controlled a normal switch:On > 100 ms and less than 650 ms, opens all curtains.On > 1000 ms closes all curtains.
See following pages.
Mode: BeoLiving
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
1: DTE (TERMINAL PINOUT )
Pin 1 - UnusedPin 2 - Transmit data (Out)Pin 3 - Receive data (In)Pin 4 - Data Terminal Ready (-9 volt out)Pin 5 - GroundPin 6 - UnusedPin 7 - 5 volt outPin 8 - UnusedPin 9 - Ring indicator (In)
2: DCE (COMPUTER PINOUT)
Pin 1 - UnusedPin 2 - Receive data (In) Pin3 - Transmit data (Out)Pin 4 - Data Terminal Ready (-9 volt out)Pin 5 - GroundPin 6 - UnusedPin 7 - 5 volt outPin 8 - UnusedPin 9 - Ring indicator (In)
RS232 connectors1 2 3
1-2: RS4852-3: RS232
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
RS485
NO!When using RS485 do notuse RS232 commport 2.
Any twisted 2-wire cable can be used.For example CAT5.
Cable length up 1000+ meters.
To computer, etc.
1 2 3
1-2: RS4852-3: RS232
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
InfraRed receiver inputs
TT-IR-8087030 X TT-IR-8087030
C B A
A B
C
Jack connector seenfrom solderside
A 5 volt B IR signalC Ground
C A
B
This connectoris reserved !Do not insert ordamage mayoccur.
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
RADIO
LIGHTTV
CDDVD
SAT
VTAPE RECORD ATAPE
98
7 65
4 32
1MENU
0TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
RADIO
LIGHTTV
CDDVD
SAT
VTAPE RECORD ATAPE
98
7
65
4
32
1
MENU0
TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
Multiroom remote control
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
TT-IR-8087030
http://www.lintronic.dk
LINTRONIC RELAY 208
RADIO
LIGHTTV
CDDVD
SAT
VTAPE RECORD ATAPE
98
7 65
4 32
1MENU
0TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
Multiroom remote control
RADIO
LIGHTTV
CDDVD
SAT
VTAPE RECORD ATAPE
98
7
65
4
32
1
MENU0
TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
TT-IR-8087030
http://www.lintronic.dk
LINTRONIC RELAY 208
LIGHT
RADIO
TVCD
DVD
SATVTAPERECORD ATAPE
98
76
54
32
1M
ENU
0
TEXT
GO
EXIT
LISTSTOP
>>
BANG & O
LUFSEN
>
>
>>
>>
2-way see-through RS232
TT455-RT-238 controls both theRELAY 208 and the computer
Computer controls both the RELAY208 and the TT455-RT-238.
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
LIGHT
RADIO
TVCD
DVD
SATVTAPERECORD ATAPE
98
76
54
32
1M
ENU
0
TEXT
GO
EXIT
LISTSTOP
>>
BANG & O
LUFSEN
>
>
>>
>>
2-way see-through RS232
LIGHT
RADIO
TV
CD
DVD
SAT
VTAPE RECORD ATAPE
9
8
7
6
5
4
3
2
1
MENU
0
TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFS
EN
>
>>>
>>
TT455-RT-238 controls both the RELAY208 and the other TT455-RT-238
TT455-RT-238 controls both the RELAY208 and the other TT455-RT-238
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
I want it all …
LIGHT RADIO
TV
CD
DVD
SAT
VTAPE RECORD ATAPE
98
7
65
4
32
1
MENU
0
TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
RS485digital inputs
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2
http://www.lintronic.dk
LINTRONIC RELAY 208
… and then some !
LIGHT RADIO
TV
CD
DVD
SAT
VTAPE RECORD ATAPE
98
7
65
4
32
1
MENU
0
TEXT
GO
EXIT
LIST
STOP
>
>
BANG & OLUFSEN
>
>
>>
>>
RS485digital inputs
1 2 3
C A R C A R C A R C A R
C A R C A R C A R C A R
1 2 3 4
5 6 7 8
GND 12V G B A 2 1
CO
M1
CO
M2