Post on 27-Apr-2018
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany1
CONSTRUCTION
GENERAL CONSTRUCTIONCONSTRUCTION – QUICK HITCHES & BUCKETS
CONSTRUCTION – TILTROTATORS
CONSTRUCTION – LANDSCAPING & SNOW REMOVAL
CONSTRUCTION – UTILITIES, OIL & GAS
SCRAP PROCESSING
DEMOLITION
MATERIAL HANDLING
RAILWAY
CUSTOM UNITS
2
1
3
4
5
6
7
8
9
10
CONSTRUCTION - GENERAL CONSTRUCTION1
2015
kinshofer Worldwide
What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.
Kinshofer France S.A.R.L. FRANCE
1986
Kinshofer Aponox Oy FINLAND2009
Kinshofer North America CANADA2000
Kinshofer UK UNITED KINGDOM1984
Kinshofer GmbHHeadquarters Marienstein, GERMANY1971
DEMAREC B.V. THE NETHERLANDS
2006
RF-System ABSWEDEN
2011
Darda Kinshofer Construction Machinery Co. Ltd.
PR CHINA2008
Kinshofer USA UNITED STATES OF AMERICA
2013
AUGER TORQUE Europe Ltd.UNITED KINGDOM
2015
A History of Quality and Success For more than 40 years we have specialized in the development and construction
of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!
ALWAYS IN MIND – OUR CLIENT‘S NEEDS
THERE IS NO ALTERNATIVE TO QUALITY
KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.KINSHOFER and the UK based company Auger Torque Europe Limited announced on February 3rd 2015 that they have signed a definite agreement to merge. Under the terms of the agreement KINSHOFER has acquired 100% of the shares of Auger Torque Europe Ltd. and Auger Torque Australia Pty Ltd.. Auger Torque is a manufacturer of earth drills, augers, trenchers and other high quality attachments for excavators, skidsteers, backhoes, telehandlers, tractors, truck cranes & more.
KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...
Primary Demolition Secondary Demolition Steel
Landscaping / Snow Removal Road Construction Civil Engineering Utilities
Scrap Metal Scrap Tires Scrap Rails
Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!
No matter if demolishing, breaking, comminuting or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect soluti-on for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!
Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!
Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined
with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.
Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined
with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.
Construction Off-Shore Nuclear Pipeline / Geothermal
Waste Bulk Material & Dry Cargo Timber
Rail Track Construction Rail Track Maintenance Scrap Rails
It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!
As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!
There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany6
Being a versatile and challenging application, the general construction requires the perfectly adapted tools, to meet the demands of the client and the task itself. From multi purpose grapples for excavators with up to 27 t / 59400 lbs operating weight, to compactor plates, rock grabs and Tiltrotators, up to clamshell buckets in different sizes and versions for excavators with up to 25 t/ 55000 lbs operating weight: KINSHOFER provides the proper attachment for every application. Quality, versatility and the customer‘s satisfaction always come first.
The Multi Purpose Grabs of the A-series are available for excavators with
1-27 t operating weight
Flexible use: Demolition and Sorting Grabs of the
D-series
The perfect combination: the MAV Compactor attached to a NOX Tiltrotator
Versatility due to the fast and economic
shell exchange: the Grabs of the C-VE-series with
exchangeable shells
The NOX Tiltrotator provides highest efficiency for every site - a cylinderless universal joint with 360° endless rotation
Increases the flexibility of each tool: the RA Rotary Actuator with up to 2 x 90° tilting angle
No matter if small or large poles, tubes or pipes: the KM 930E Manipulator facilitates your task
(here custom unit shown)
Ideal for the loading and positioning of large rocks: the R-series Rock Grabs
Ideal for levelling slopes or clearing the road: the SKB Brush is the perfect help, no matter if summer or winter season
General Construction ....... includes a wide range of applications, amongst
others landscaping, road construction or snow removal. No matter the task, KINSHOFER provides the perfect tool !
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany7
Contents
Cata
log
effec
tive
Janu
ary
2015
—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com
Summary Listed by Operating Weight of Excavator 8
PremiumLine 10
NOX Tiltrotators
for excavators with 3t / 6600 lbs to 25t / 55000 lbs operating weight: TR06NOX / TR10NOX / TR18NOX / TR25NOX 15
proportional control systems 16
TC Tilt Couplers
for excavators with 3t / 6600 lbs to 23t / 50600 lbs operating weight: TC05 / TC09 / TC14 / TC20 18
Clamshell Buckets
for excavators with up to 2t / 4400 lbs operating weight with horizontal cylinder: C02H 19
for excavators with up to 3t / 6600 lbs operating weight with horizontal cylinder: C03H 20
for excavators with up to 9t / 17600 lbs operating weight with HPXdrive: C05HPX / C08HPX 21 with horizontal cylinder: C05H 22 with horizontal cylinder: C08H 23 with vertical cylinder: C08V 24 with vertical cylinder: C08F 25 with vertical cylinder and exchangeable shells: C08VE 26
for excavators with up to 10t / 22000 lbs operating weight with horizontal cylinder: C10H 27
for excavators with up to 12t / 26400 lbs operating weight with horizontal cylinder: C12H 28
for excavators with up to 12t / 26400 lbs operating weight with vertical cylinders and exchangeable shells: C12VE 29 exchangeable shells for C12VE 30
for excavators with up to 18t / 39600 lbs operating weight with vertical cylinders and exchangeable shells: C18VE 31 exchangeable shells for C18VE 32
for excavators with up to 25t / 55000 lbs operating weight with vertical cylinders and exchangeable shells: C25VE 33
Multi Purpose Grabs
for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: A12H/A15H/A20H/A27H 34
Demolition and Sorting Grabs
for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: D15H/D20H/D27H with metal ribs and 35 D12H-P/D15H-P/D20H-P/D27H-P with perforated shells
for excavators with up to 80t / 176000 lbs operating weight with horizontal cylinder: D15H-P-75HD / D16H-P-90HD / D19H-P-85HD / 36 D20H-P100HD / D24H-P100HD / D32H-P-110HD with perforated shells
Rock Grabs
for excavators with up to 13t / 28600 lbs operating weight with horizontal cylinders: R12H 37
for excavators with up to 27t / 59400 lbs operating weight with horizontal cylinders: R20H/R27H 38
Manipulators
Barrier Lifter for excavators with up to 27t / 59400 lbs operating weight: KM 932MB 39
Manipulator for excavators with up to 25t / 55000 lbs operating weight: KM 930E 40
Compactors / Multi Purpose Compactors
for excavators with up to 45t / 99000 lbs operating weight: Compactor MAV 41
for excavators with up to 24t / 52800 lbs operating weight: Multi Purpose Compactor MAU 41
Grinder
for excavators with up to 7t / 15400 lbs to 50t / 110000 lbs operating weight: Disc Grinder STF 42
for excavators with up to 2t / 4400 lbs to 22t / 48400 lbs operating weight: Asphalt Grinder PLB 42
Sweepers and Brushes
Sweeper Roller for all loaders and excavators with an operating weight >1t / 2200 lbs: SKB 10 / SKB 15 / SKB 20 / SKB 26 / SKB 30 43
Rotor Brush for excavators with up to 20t / 44000 lbs operating weight: ROB 20 43
Bucket Sweeper for excavators with 5t / 11000 lbs to 24t / 52800 lbs operating weight: SKS 15/SKS 20/SKS 26/SKS 30 44(also available for loaders)
Frost and Ice Ripper
for excavators with up to 60t / 132000 lbs operating weight: TJR 2/TJR 4/TJR 6/TJR 8/TJR 12/TJR 14/TJR 20/TJR 24/TJR 30/TJR 35/TJR 40 45
Buckets
see catalog CONSTRUCTION - QUICK HITCHES & BUCKETS
Accessories & Technics
Additional & Small Parts 46
Accessories for Cardanic and Rigid Mounting 47
kinshofer Rotator Line 49
Technics 50
Exchangeable Shells HPXdrive 51
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany8
Summary Listed by Operating Weight of Excavator
Type Operating Weight of Excavator (t / lbs)
Tiltrotators 1 2 3 4 5 6 7 8 9 10 ... 15 16 17 18 19 20 21 22 23 24 25
TR06NOX 6600 8800 11000 13200
TR10NOX 11000 13200 15400 17600 19800 22000
TR18NOX 19800 22000 ... 33000 35200 37400 39600
TR25NOX 39600 41800 44000 46200 48400 50600 52800 55000
Rotary Actuators1 2 3 4 5 6 7 8 9 10 ... 14 15 16 17 18 19 20 21 22 23 24
TC05 6600 8800 11000
TC09 13200 15400 17600 19800
TC14 22000 ... 30800
TC20 33000 35200 37400 39600 41800 44000
Clamshell Buckets 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ... 25
C02H 2200 4400
C03H 4400 6600
C05H 6600 8800 11000 13200
C05HPX 6600 8800 11000 13200
C08H 8800 11000 13200 15400 17600 17600
C08V 8800 11000 13200 15400 17600 17600
C08F 8800 11000 13200 15400 17600 17600
C08VE 8800 11000 13200 15400 17600 17600
C08HPX 11000 13200 15400 17600 17600
C10H 13200 15400 17600 19800 22000
C12H 19800 22000 24200 26400
C12VE 19800 22000 24200 26400
C18VE 28600 30800 33000 35200 37400 39600
C25VE 41800 44000 ... 55000
Multi Purpose Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 ... 40
A12H 22000 24200 26400
A15H 26400 28600 30800 33000
A20H 30800 33000 ... 39600 41800 44000
A27H 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400
Multi Purpose Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 ... 27 ... 30 31 ... 40
D12H-P 22000 24200 26400
D15H 24200 26400 28600 30800 33000
D15H-P 24200 26400 28600 30800 33000
D15H-P HD 22000 24200 26400 28600 30800 33000 ... 39600
D16H-P HD 26400 28600 30800 33000 ... 39600 41800
D19H-P HD 26400 28600 30800 33000 ... 39600 41800 44000 46200 48400 50600 52800
D20H 30800 33000 ... 39600 41800 44000
D20H-P 30800 33000 ... 39600 41800 44000
D20H-P HD 26400 28600 30800 33000 ... 39600 41800 44000 46200 48400 50600 52800 55000
D24H-P HD 33000 ... 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400 ... 66000
D27H 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400
D27H-P 39600 41800 44000 46200 48400 50600 52800 55000 ... 59400
D32H-P HD 41800 44000 46200 48400 50600 52800 55000 ... 59400 ... 66000 68200 ... 88000
Rock Grabs10 11 12 13 14 15 ... 18 19 20 21 22 23 24 25 26 27 ... 30 31 ... 40
R12H 22000 24200 26400 28600
R20H 30800 33000 ... 39600 41800 44000
R27H 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany9
Summary Listed by Operating Weight of Excavator
Type Operating Weight of Excavator (t / lbs)
Manipulators7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
KM 932MB 39600 41800 44000 46200 48400 50600 52800 55000 57200 59400
KM 930-1000E 15400 17600 19800 22000 24200 26400
KM 930-2000E 35200 37400 39600 41800 44000 46200 48400 50600 52800 55000
Compactors / Multi Purpose Compactors1 ... 5 6 8 9 10 12 14 16 18 19 21 ... 24 25 ... 35 ... 40 41 45
MAV 08 2200 ... 11000 13200 17600
MAV 18 19800 22000 26400 30800 35200 39600
MAV 35 41800 46200 ... 52800 55000 ... 77000
MAV 40 55000 ... 77000 ... 88000
MAV 45 90200 99000
MAU 06 2200 ... 11000 13200
MAU 08 11000 13200 17600
MAU 14 19800 22000 26400 30800
MAU 18 26400 30800 35200 39600
MAU 24 41800 46200 ... 52800
Grinder2 3 4 5 6 7 8 9 10 11 12 ... 20 21 22 23 24 25 ... 30 ... 50
STF 15100 15400 17600 19800 22000 24200 26400 ... 44000 46200 48400 50600 52800 55000 ... 66000 ... 110000
STF 1870 15400 17600 19800 22000 24200 26400 ... 44000 46200 48400 50600 52800 55000 ... 66000 ... 110000
PLB 300 4400 6600 8800 11000 13200
PLB 450 13200 15400 17600 19800 22000 24200 26400
PLB 600 26400 ... 44000 46200 48400
Brushes3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
SKS 0904 6600 8800 11000 13200
SKS 1104 6600 8800 11000 13200
SKS 1106 15400 17600 19800 22000 24200 26400
SKS 1225 22000 24200 26400 28600 30800
SKS 1375 26400 28600 30800 33000 35200
SKS 1685 30800 33000 35200 37400 39600
SKS 1856 39600 41800 44000 46200 48400
SKS 2356 39600 41800 44000 46200 48400
SKS 2506 44000 46200 48400 50600 52800
Frost and Ice Ripper1 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 ... 35 36 ... 39 40
TJR 2 2200 4400
TJR 4 4400 8800
TJR 6 8800 13200
TJR 8 13200 17600
TJR 12 17600 22000 26400
TJR 14 26400 30800
TJR 20 30800 35200 39600 44000
TJR 24 44000 48400 52800
TJR 30 52800 57200 61600 66000
TJR 35 66000 ... 77000
TJR 40 77000 79200 ... 85800 88000
Legend:
horizontal cylinder (H = horizontal)
vertical cylinder (V = vertical, type E = with exchangeable shells)
HPXdrive
others
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany10
Clamshell Buckets with HPXdrive page
C05HPX-40 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 115 l / 0.15 c.y.
20
C05HPX-50 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 140 l / 0.18 c.y.
20
C05HPX-60 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 170 l / 0.22 c.y.
20
C08HPX-40 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 145 l / 0.19 c.y.
20
C08HPX-60 Clamshell bucket with HPXdrive complete package with bolt-on teeth, rotator, non-return valve and hose guard, volume 220 l / 0.29 c.y.
20
Clamshell Buckets with Exchangeable Shells page
C12VE-60 Clamshell bucket with exchangeable shells complete package with bolt-on teeth, rotator, non-return valve, hose guard and 2 welded eyes
28
C12VE-80 Clamshell bucket with exchangeable shells complete package with bolt-on teeth, rotator, non-return valve, hose guard and 2 welded eyes
26
C18VE-60 Clamshell bucket with exchangeable shells complete package with bolt-on teeth, rotator, non-return valve, hose guard and 2 welded eyes
44
C18VE-80 Clamshell bucket with exchangeable shells complete package with bolt-on teeth, rotator, non-return valve, hose guard and 2 welded eyes
30
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany11
Top Products now with Shorter Delivery Time
Ready-to-Mount and Optimally Adapted Complete Packages
Professional Tools for Professional UsersGUARA
NTEED
Top Products now with Shorter Delivery Time
Ready-to-Mount and Optimally Adapted Complete Packages
Professional Tools for Professional Users
Tiltrotators page
TR06NOX Tiltrotator 15
TR10NOX Tiltrotator 15
TR18NOX Tiltrotator 15
TR25NOX Tiltrotator 15
Tilt Couplers page
TC05-100 / TC05-140 / TC05-180 Tilt couplers 18
TC09-100 / TC09-140 / TC09-180 Tilt couplers 18
TC14-100 / TC14-140 / TC14-180 Tilt couplers 18
TC20-140 Tilt couplers 18
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany12
Heavy Duty Demolition and Sorting Grabs page
D15H-P-75HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
D16H-P-90HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
D19H-P-85HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
D20H-P-100HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
D24H-P-100HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
D32H-P-110HD Heavy duty demolition and sorting grab complete package with integrated rotation, exchangeable cutting edges and non-return valve
35
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany13
Multi Purpose Compactors page
MAU 06 Multi purpose compactor for excavators with 1t / 2200 lbs to 6t / 13200 lbs operating weight
40
MAU 08 Multi purpose compactor for excavators with 5t / 11000 lbs to 8t / 17600 lbs operating weight
40
MAU 14 Multi purpose compactor for excavators with 9t / 19800 lbs to 14t / 30800 lbs operating weight
40
MAU 18 Multi purpose compactor for excavators with 12t / 26400 lbs to 18t / 39600 lbs operating weight
40
MAU 24 Multi purpose compactor for excavators with 19t / 41800 lbs to 24t / 52800 lbs operating weight
40
Top Products now with Shorter Delivery Time
Ready-to-Mount and Optimally Adapted Complete Packages
Professional Tools for Professional UsersGUARA
NTEED
Top Products now with Shorter Delivery Time
Ready-to-Mount and Optimally Adapted Complete Packages
Professional Tools for Professional Users
Asphalt Cutters
ASF M 40-50 Asphalt cutter with quick coupling S40, S45 or S50 40
ASF M 60 Asphalt cutter with quick coupling S60 40
Compactor Plates
MVP 06 Compactor plate 40
MVP 08 Compactor plate 40
MVP 14 Compactor plate 40
MVP 18 Compactor plate 40
MVP 24 Compactor plate 40
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany14
Compactors with Rigid Compactor Plate page
MAV 08 Compactor for excavators with 1t / 2200 lbs to 8t / 17600 lbs operating weight
40
MAV 18 Compactor for excavators with 9t / 19800 lbs to 18t / 39600 lbs operating weight
40
MAV 35 Compactor for excavators with 19t / 41800 lbs to 35t / 77000 lbs operating weight
40
MAV 40 Compactor for excavators with 25t / 55000 lbs to 40t / 88000 lbs operating weight
40
MAV 45 Compactor for excavators with 41t / 90200 lbs to 45t / 99000 lbs operating weight
40
Mounting Versions: with head plate plus rotator and / or quick hitch, etc., see p. 40
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany15
10 t … 15 t … 18 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t
TR06NOX / TR10NOX / TR18NOX / TR25NOXTiltrotatorsExperience and innovation have led to one of the most advanced tools for excavators – the NOX Tiltrotator: continuous 360° rotation and a tilting angle of up to 2 x 55° make it a universal joint. Combined with quick change system and various attachments this means highest efficiency at any construction site. The NOX Tiltrotator range is optimally engineered to suit excavators with an operating weight from 3t / 6600 lbs to 25t / 55000 lbs.l Precision and safety due to „smooth“ proportional control (optional).l High stability and long service life thanks to special cast housing.l Low overall height thanks to elliptic rotary actuator: large travel.l High and constant tilt force due to cylinderless rotary actuator.l No protruding parts: excavation with narrow bucket in small, deep canals, even under or in between existing tubes. l Low maintenance: worm drive runs in permanent greasing. For further information see our Catalog CONSTRUCTION - TILTROTATORS
Requirements of ExcavatorHydraulic system: minimum of one single acting hydraulic circuit (hammer valve with free return line to tank)
double acting hydraulic circuit equally possible for DF4, DF8 and DF10 models (not CSP/CSS)Operating pressure: 25 MPa (250 bar) / 3600 psi [TR25NOX: 30 MPa (300 bar) / 4320 psi]; max. backflow pressure 1 MPa (10 bar) / 144 psiElectrics (for CSS and CSP): electric supply 12V or 24 VTechnical Drawings
Tiltrotator TR06NOX / TR10NOX / TR18NOX / TR25NOX with 360° rotationType Excavator Self Width Length Height max. Width Tilting Tilting Rotating Rotations Rotary
operating weight1) A2) B2) C2) bucket angle torque3) torque5) / min feedthroughweight (t/lbs) (app. kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (°) (kNm/ft.lbs) (Nm/ft.lbs) (RPM) (l/min / GPM)
TR06NOX >3-6 120 185 500 370 13002 x 50
8,5 constant 45009,07) 40
>6600-13200 264 7.28 19.69 14.57 51.18 6270 constant 3320 10.57
TR10NOX>5-10 220 205 610 445 1600
2 x 55 10,5 constant 6500
7,57) 40 [7010)]]>11000-22000 484 8.07 24.02 17.52 62.99 7745 constant 4795 10.57 [18.4910)]
TR18NOX >9-18 460 225 740 530 2000 2 x 50 22,5 constant 8000 7,08) 120>19800-39600 1012 8.86 29.13 20.87 78.74 16595 constant 5900 31.70
TR25NOX>18-25 610 260 760 650 2200
2 x 50 44 constant 90006)
7,09)80 [80 +180]11)
21.14 [21.14 + 47.56]>39600-55000 1342 10.23 29.92 25.60 86.61 324504) constant 66386)
1) total weight incl. upper suspension, excl. quick coupler 2) reference: TR06NOX S40/S40, TR10NOX S45/S45, TR18NOX S60/S60, TR25NOX S70/S70 3) at 25 MPa / 3600 psi 4) at 30 MPa / 4320 psi 5) at 25 MPa / 3240 psi and vertical axis 6) at 20 MPa / 2880 psi 7) CSP & CSSat 30 l/min / 7.93 GPM 8) CSP & CSS at 40 l/min / 10.57 GPM 9) CSP at 80 l/min / 21.14 GPM 10) for DF8 and DF10 control 11) Standard: 1 Extra function (80 l/min / 21.14 GPM); Advanced: 2 Extra functions (80 l/min+180 l/min / 21.14+47.56 GPM)
Standard package consists of: tiltrotator, control system, upper suspension or coupling, lower coupler or quick coupler
AccessoriesGripper Description Self Dimensions max. Opening Closing Closing Load
weight D x E x F14) width G time15) force capacityType
hydraulic gripper module, rigidly mounted to the NOX, can be used to pose masts, tubes etc. without the necessity of changing an attachment
(app. kg/lbs) (mm/in) (mm/in) (sec.) (kN/lbf) (kg/lbs)
TRG06 40 / 470 x 515 x 140 415 / 1.5 7.5 / 300 /88 10.5 x 20.3 x 5.5 16.34 1650 660
TRG10 80 / 600 x 675 x 205 610 / 1.3 10 / 500 /176 23.6 x 26.6 x 8.1 24.02 2200 1100
TRG18 113 / 700 x 715 x 265 713 / 1.7 18 / 900 /249 27.6 x 28.2 x 10.4 28.07 3960 1980
TRG25 195 / 895 x 760 x 295 1100 / 2.0 19.5 / 1400 /429 35.2 x 29.9 x 11.6 43.31 4290 3080
14) see technical drawing 15) at 25 l/min / 6.61 GPM
TR25NOX
lower quick hitch continuous rotation (360°)
tilt angle
Total height depending on mounted adapters
GripperTRG06
Tiltrotator TR18 S60 S60
quick coupler
C
50°A
B
D
E
FG
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany16
10 t … 15 t … 18 t … 25 t … 32 t … 40 t … 50 t…5 t…3 t
Proportional Control Systems
Functions CSP NOXPROP
DF10 DF8 DF4 CSP SVAB
CSS
Hydraulic circuit needed 1) 1s 2d - 4d 2d - 3d 2d 1s 1s
Quick coupler hydraulics 2) integrated required required integrated integrated integrated
Control valves in excavator NO YES YES YES NO NO
Functions tiltrotator T+R+E+C T+R+E(x2)+C T+R+E+C R / T+E+C T+R+E+C T+R+E+C
Control valves in tiltrotator 3) YES NO NO YES YES YES
Number of extra functions 1 / 2 2 1 1 1 2
Adapted to TR06NOX 4) 5)
Adapted to TR10NOX 5) 5)
Adapted to TR18NOX 5) 5)
Adapted to TR25NOX 4) 5) Description:1s One single acting hydraulic circuit (hammer line)
2d Two double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportional or ON/OFF depending on the machine
3d Three (or two) double acting hydraulic circuits are available in the machine (high pressure as well as high flow) and functions can be controlled proportinal or ON/OFF depending on the machine
T+R+E+C Tilt, rotation, extra function, hydraulic quick coupler
T+R+E(x2)+C Tilt, rotation, 2 x extra function, hydraulic quick coupler
R / T+E+C Circle 1 controls the rotation, circle 2 manages tilt, extra function, hydraulic quick coupler1) Free return line must be available or must be installed for tiltrotator2) Most quick couplers need a double acting hydraulic circuit. Please always specify LQC model and hydraulics before choosing controlling system
3) Only with CSP and CSS control systems all functions will be controlled by directional valves in the tiltrotator. All other DF control systems must have 6/2 directional valves in order to split circuits. 6/2 directional valves are not included in the prices. Also 2/2 directional valve to operate a hydraulic LQC must be installed on the machine and is not included in the price.
4) 2 extra functions possible5) 1 extra functions possibleNote: 1. Mechanical LQC can be used with all control systems
2. Hydraulic upper quick coupler must be controlled seperately and not by the standard control system
Pictures
left joystick right joystick
left buttonextra function
left proportional controller
right proportional controller
CSP NOXPROPOperators can now control the actions of their NOX-Tiltrotator with two joysticks. Quick Coupler and attached tools are also operated comfortably and effectively by means of the smart NOXPROP Control System: tilt and rotation are controlled by proportional solenoid valves and can be run simultaneously. The extra function is controlled proportionally, too. A separate display module is included.
Control Systems for NOX TiltrotatorsType Description
CSP NOXPROP Tilt, rotation, extra function proportional; choice of tool or profile via display; configuration via laptop
DF10 All functions are controlled by the excavator directly; max. 5 double acting circuits can be connected; 2 extra functions + quick coupler (6-port swivel)
DF8 All functions are controlled by the excavator directly; max. 4 double acting circuits can be connected; 1 extra function + quick coupler (4-port swivel)
DF42 double acting circuits required. Circuit 1 controls rotation, circuit 2 manages tilt, extra function plus quick coupler. The change between the functions is controlled by integrated solenoid valves. A free ON/OFF button at the joystick is required. The quick coupler is controlled by a security switch on the included display module.
CSP SVAB Tilt, rotation proportional; extra function ON/OFF; limited choice of profiles via display; configuration only by controllerCSS All functions ON/OFF; no choice of profile possible; control via ON/OFF-buttons
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany17
Main Benefits
NO HYDRAULIC CYLINDERSl Compact designl No protruding, disturbing parts such as cylindersl Narrow width
LARGE TILTING ANGLEl Up to 2 x 55°l More flexibility
SERVICE FRIENDLYl Only 2 greasing pointsl Easy installationl Less wear partsl Solid cast housingl Integrated hydraulics
PATENTED TILTING FUNCTIONl Elliptic piston design, only one threadl Closed system - less damage risksl Constant tilting force
HIGH FLOW SWIVELl High flow swivel as standard - up to 180 l/min / 47.56 GPMl Large variety of attachments availablel Good tolerance against back pressure
SUITABLE KINSHOFER CONTROL SYSTEMSl Smooth controll More safety and precision
nox-Tiltrotators
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany18
9 t … 14 t … 20 t … 23 t … 28 t … 35 t…5 t…3 t
Tilt Couplers (Kinshofer Wedgelock-Style) TC05 to TC20
Requirements of Excavator
Hydraulic system: 2 double acting hydraulic circuitsOption: external pressure relief valveWorking pressure: max. 25 MPa / 3600 psi (to be preset at excavator)
Technical Drawings
Rotary Actuators incl. Upper Bracket and hydraulic Kinshofer Wedgelock Quick Coupler
Type Excavator operating Tilt angle Torque (tilt)1) Holding torque1) Recommendedweight (t/lbs) α max. (°) (kNm/ft.lbs) (kNm/ft.lbs) oil flow (l/min / GPM)
TC05-100 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 50 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC05-140 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 70 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC05-180 DM/CMI-037 3 - 5 / 6600 - 11000 2 x 90 3,5 / 2580 6,0 / 4425 5 - max. 10 / 1.32 - max. 2.64TC09-100 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 50 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-100 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 50 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-140 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 70 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-140 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 70 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-180 DM/CSI-055 4 - 6 / 8800 - 13200 2 x 90 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC09-180 DM/CSI-070 6 - 9 / 8800 - 19800 2 x 90 5,3 / 3910 9,0 / 6635 7 - max. 14 / 1.85 - max. 3.70TC14-100 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 50 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC14-140 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 70 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC14-180 DM/CMI-130 10 - 14 / 22000 - 30800 2 x 90 12,6 / 9290 21,4 / 15780 14 - max. 28 / 3.70 - max. 7.40TC20-140 DM/CMI-170 19 - 23 / 41800 - 50600 2 x 70 22,0 / 16225 37,4 / 27580 20 - max. 40 / 5.28 - max. 10.57TC20-140 DM/CMI-210 19 - 23 / 41800 - 50600 2 x 70 22,0 / 16225 37,4 / 27580 20 - max. 40 / 5.28 - max. 10.57
1) at 25 MPa (250 bar) / 3600 psi
Accessories
Control kit Wedgelock
Experience and innovation have led to one of the most advanced tools for excavators – the KINSHOFER Rotary Actuator. A tilting angle of 2 x 50° up to 2 x 90° makes it an agile joint.Combined with a quick coupler system and various attachments this means high efficiency at any construction site: The TC Series range is optimally engineered to suit excavators with an operating weight of 3t / 6600 lbs to 23t / 50600 lbs.l Most compact design – minimal height and length.l High and constant tilting torque.l Wide tilting angle 100° / 140° / 180° (up to TC14).l High durability and long lifetime by special alloy cast body and single thread arrangement.l Less maintenance: elliptic tilting drive runs in permanent oil bath. Small number of seals.l Versatile usage for quick coupler systems, tilting buckets and other special applications. l Single RA drive available on request.l Here with Kinshofer Wedgelock Quick Coupler.
90°2x
RA14-180
TC14-180
with upper bracket and Wegdelock quick coupler
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany19
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C02H
Clamshell Bucket C02H
Type Width E Opening A Height C max. Volume Number of Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)
C02H-25 250 / 9.84 725 / 28.54 750 / 29.53 25 / 0.03 3 92 / 202 1000 / 2200C02H-30 300 / 11.81 725 / 28.54 750 / 29.53 30 / 0.39 3 99 / 218 1000 / 2200C02H-40 400 / 15.75 725 / 28.54 750 / 29.53 45 / 0.59 4 112 / 246 1000 / 2200
Package consists of: clamshell bucket, bolt-on teeth, Kinshofer rotator, non-return valve and hose guard
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215
Accessories
Type DescriptionKM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW01 cardanic adapter for Lehnhoff grab exchange system SW/MS01 without suspension – up to 2t / 4400 lbsSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 1t-4t scraper
Requirements of Excavator
Operating pressure (open/close): max. 20 MPa (200 bar) / 2880 psiRecommended oil flow (open/close): 10 - max. 40 l/min / 2.64 - max. 10.57 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
Robust clamshell bucket in compact form for mini excavators up to 2t / 4400 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces
(24 kN / 5280 lbf at an operating pressure of 20 MPa / 2880 psi).
E
Cm
ax
A
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany20
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C03HRobust clamshell bucket in compact form for mini excavators from 2t / 4400 lbs to 3t / 6600 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces
(26 kN / 5720 lbf at an operating pressure of 26 MPa / 3744 psi).l Cylinder protection included (starting at width 350 mm / 13.78 in).
Clamshell Bucket C03H
Type Width E Opening A Height C max. Volume Number of Self weight Load capacity(mm/(in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)
C03H-25 250 / 9.84 930 / 36.61 850 / 33.46 45 / 0.06 3 130 / 286 1500 / 3300C03H-30 300 / 11.81 930 / 36.61 850 / 33.46 55 / 0.07 3 135 / 297 1500 / 3300C03H-35 350 / 13.78 930 / 36.61 850 / 33.46 65 / 0.09 4 145 / 319 1500 / 3300C03H-40 400 / 15.75 930 / 36.61 850 / 33.46 75 / 0.10 4 150 / 330 1500 / 3300C03H-45 450 / 17.72 930 / 36.61 850 / 33.46 85 / 0.11 4 160 / 352 1500 / 3300C03H-50 500 / 19.69 930 / 36.61 850 / 33.46 95 / 0.12 4 165 / 363 1500 / 3300
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, cylinder protection (starting at the width of 350mm/13.78in), non-return valve and hose guard
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F 84 x 30 / 3.31 x 1.18 850 /625 3000 / 2215
Accessories
Type Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW01 cardanic adapter for Lehnhoff grab exchange system SW/MS01 without suspension – up to 2t / 4400 lbsSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 1t-4t scraper
Requirements of Excavator
Operating pressure (open/close): max. 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
E
Cm
ax
A
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany21
Clamshell Buckets with HPXdrive
C08HPX
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C05HPX
C08HPX
C05HPX / C08HPX
Clamshell Bucket C05HPX Type Width E Opening A Height C max. Volume Number Self weight Load capacity Operating
(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs) weight (t/lbs)C05HPX-40 400 / 15.75 1110 / 43.70 880 / 34.65 115 / 0.15 4 270 / 594 3000 / 6600 3-6 / 6600-13200C05HPX-45 450 / 17.72 1110 / 43.70 880 / 34.65 130 / 0.17 4 285 / 627 3000 / 6600 3-6 / 6600-13200C05HPX-50 500 / 19.69 1110 / 43.70 880 / 34.65 140 / 0.18 4 290 / 638 3000 / 6600 3-6 / 6600-13200C05HPX-60 600 / 23.62 1110 / 43.70 880 / 34.65 170 / 0.22 6 305 / 671 3000 / 6600 3-6 / 6600-13200C05HPX-80 800 / 31.50 1110 / 43.70 880 / 34.65 230 / 0.30 6 330 / 726 3000 / 6600 3-6 / 6600-13200
Clamshell Bucket C08HPX Type Width E Opening A Height C max. Volume Number Self weight Load capacity Operating
(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs) weight (t)C08HPX-40 400 / 15.75 1250 / 49.21 960 / 37.80 145 / 0.19 4 280 / 616 3000 / 6600 5-9 / 11000-19800 C08HPX-45 450 / 17.72 1250 / 49.21 960 / 37.80 160 / 0.21 4 295 / 649 3000 / 6600 5-9 / 11000-19800 C08HPX-50 500 / 19.69 1250 / 49.21 960 / 37.80 180 / 0.24 4 300 / 660 3000 / 6600 5-9 / 11000-19800 C08HPX-60 600 / 23.62 1250 / 49.21 960 / 37.80 220 / 0.29 6 320 / 704 3000 / 6600 5-9 / 11000-19800 C08HPX-80 800 / 31.50 1250 / 49.21 960 / 37.80 300 / 0.39 6 340 / 748 3000 / 6600 5-9 / 11000-19800 Package C05/C08HPX: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guardPlease note: exchangeable shells for special applications on request
KINSHOFER RotatorsIntegrated in a single unit with the HPXdrive, no more connecting hoses. Continous rotation. Overload protection ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
C05HPX: KM 04 F140-30VE 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215C08HPX: KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270
Accessories Type DescriptionKM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 5t-8t scraperKM 685 06 hook set 2 welded hooks (2 pcs.)KM 685 07 set wear plates to protect horizontal cutting edgesKM 685 08 extension for excavating e.g. trenches – 450 mm / 17.72 in (30 kg / 66 lbs)
Requirements of ExcavatorC05HPX C08HPX
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi, internal pressure 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 40 - max. 75 l/min / 10.57 - max. 19.82 GPM 40 - max. 75 l/min / 10.57 - max. 19.82 GPMOperating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
Universal clamshell bucket with the HPXdrive for compact excavators from 3t / 6600 lbs to 9t / 19800 lbs operating weight – maintenance free!
l HPXdrive – the revolutionary concept for hydraulically operated grabs! The rotation of the arms of the grab is generated by two hollow shafts, which run opposed and have a helix thread, hydraulically driven by a single piston. No hydraulic cylinder required!
l 50% longer life cycle. The drive unit runs in a permanent oil bath – no lubrication necessary. Resistant against dirt and blows due to the compact design.
l Constant closing forces during the entire digging process (C05: 25 kN/5500 lbf / C08: 22 kN/4840 lbf at an internal operating pressure of 26 MPa / 3744 psi).
l Different applications possible through easy exchange system.l Long life is ensured due to the use of 500 HB steel in the manufacture
of cutting edges.
option welded hooks
A E
Cm
ax
A
Cm
ax
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany22
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C05HRobust clamshell bucket in compact form for mini and compact excavators from 3t / 6600 lbs to 6t / 13200 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system. l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces
(21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi).l Cylinder protection included (starting at width 350 mm / 13.78 in).
Clamshell Bucket C05H
Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C05H-25 250 / 9.84 1090 / 42.91 930 / 36.61 70 / 0.09 3 140 / 308 2000 / 4400C05H-30 300 / 11.81 1090 / 42.91 930 / 36.61 85 / 0.11 3 150 / 330 2000 / 4400C05H-35 350 / 13.78 1090 / 42.91 930 / 36.61 100 / 0.13 4 160 / 352 2000 / 4400C05H-40 400 / 15.75 1090 / 42.91 930 / 36.61 115 / 0.15 4 165 / 363 2000 / 4400C05H-45 450 / 17.72 1090 / 42.91 930 / 36.61 130 / 0.17 4 170 / 374 2000 / 4400C05H-50 500 / 19.69 1090 / 42.91 930 / 36.61 140 / 0.18 4 180 / 396 2000 / 4400C05H-60 600 / 23.62 880 / 34.65 825 / 32.48 115 / 0.15 5 175 / 385 2000 / 4400
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, cylinder protection (starting at the width of 350mm), non-return valve and hose guard
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F 84 x 30 / 3.31 x 1.18 850 / 625 3000 / 2215
Accessories
Type Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 5t-8t scraper
Requirements of Excavator
Operating pressure (open/close): max. 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
A
C m
ax
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany23
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C08HRobust clamshell bucket for every day operation for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system.l Maximum loading height is achieved through the compact design.l Excellent digging characteristics are the result of high closing forces –
21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi (26 kN / 5720 lbf at an operating pressure of 32 MPa / 4608 psi).
Clamshell Bucket C08H
Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C08H-32 325 / 12.80 1260 / 49.61 1060 / 41.73 115 / 0.15 3 240 / 528 3000 / 6600C08H-40 400 / 15.75 1260 / 49.61 1060 / 41.73 145 / 0.19 3 260 / 572 3000 / 6600C08H-50 500 / 19.69 1260 / 49.61 1060 / 41.73 185 / 0.24 5 280 / 616 3000 / 6600C08H-60 600 / 23.62 1260 / 49.61 1060 / 41.73 220 / 0.29 5 295 / 649 3000 / 6600C08H-80 800 / 31.50 1260 / 49.61 1060 / 41.73 300 / 0.39 9 330 / 726 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270
Accessories
Type Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 5t-8t scraper
Requirements of Excavator
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 90 l/min / 10.57 - max. 23.78 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
C m
ax
A E
30 84
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany24
Clamshell Bucket with Vertical Cylinder
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C08VClamshell bucket with vertical cylinder for earthwork and trenches for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – ideal for foundations and cable trenches.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Durable as the hydraulic cylinder is fully enclosed in a hub unit, short hydraulic connecting hoses.
l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces
21 kN / 4620 lbf at an operating pressure of 26 MPa / 3744 psi (26 kN / 5720 lbf at an operating pressure of 32 MPa / 4608 psi).
––––> Alternatively to the C08V the C08HPX can be used with an extension for excavating.
Clamshell Bucket C08V
Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C08V-32 325 / 12.80 1260 / 49.61 1290 / 50.79 115 / 0.15 3 305 / 671 3000 / 6600C08V-40 400 / 15.75 1260 / 49.61 1290 / 50.79 145 / 0.19 3 325 / 715 3000 / 6600C08V-50 500 / 19.69 1260 / 49.61 1290 / 50.79 185 / 0.24 5 345 / 759 3000 / 6600C08V-60 600 / 23.62 1260 / 49.61 1290 / 50.79 220 / 0.29 5 365 / 803 3000 / 6600C08V-80 800 / 31.50 1260 / 49.61 1290 / 50.79 300 / 0.39 9 400 / 880 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270
Accessories
Type Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 5t-8t scraper
Requirements of Excavator
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 90 l/min / 10.57 - max. 23.78 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
A E
C m
ax
1170
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany25
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C08FClamshell bucket with vertical cylinder for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – specially constructed for excavating foundations and graves.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.l Durable as the hydraulic cylinder is fully enclosed in a hub unit, short hydraulic
connecting hoses.l Reduced wear resulting from generously dimensioned bearing system.l Excellent digging characteristics are the result of high closing forces
(24 kN / 5280 lbf to 34 kN / 7480 lbf at an opening pressure of 26 MPa / 3744 lbf ).l Scraper is standard.
Clamshell Bucket C08F
Type Width Opening Height Volume Number Self Load capacity
Closing forceE A C max. of teeth weight
(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf )C08F-100 600 / 23.62 830 / 32.68 1220 / 48.03 100 / 0.13 5 320 / 704 3000 / 6600 34 / 7480C08F-125 760 / 29.92 830 / 32.68 1220 / 48.03 125 / 0.16 7 355 / 781 3000 / 6600 34 / 7480C08F-150 600 / 23.62 1050 / 41.34 1325 / 52.17 150 / 0.20 5 315 / 693 3000 / 6600 29 / 6380C08F-190 760 / 29.92 1050 / 41.34 1325 / 52.17 190 / 0.25 7 340 / 748 3000 / 6600 29 / 6380C08F-200 600 / 23.62 1200 / 47.24 1425 / 56.10 200 / 0.26 5 335 / 737 3000 / 6600 24 / 5280Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve, hose guard and scraper
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270
Accessories
Type Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers available
Requirements of Excavator
Operating pressure (open/close): max. 26 MPa (260 bar) / 3744 psiRecommended oil flow (open/close): 40 - max. 90 l/min / 10.57 - max. 23.78 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
EA
C m
axClamshell Bucket with Vertical Cylinder
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany26
Clamshell Bucket with Exchangeable Shells
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
Clamshell Bucket C08VEType Width E Opening A* Height C max.* Height C min.* Volume Number Self weight Load capacity
(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)C08VE-32 325 / 12.80 1330 / 52.36 1520 / 59.84 1380 / 54.33 115 / 0.15 3 330 / 726 3000 / 6600C08VE-40 400 / 15.75 1330 / 52.36 1520 / 59.84 1380 / 54.33 145 / 0.19 3 335 / 737 3000 / 6600C08VE-50 500 / 19.69 1330 / 52.36 1520 / 59.84 1380 / 54.33 185 / 0.24 5 345 / 759 3000 / 6600C08VE-60 600 / 23.62 1330 / 52.36 1520 / 59.84 1380 / 54.33 220 / 0.29 5 355 / 781 3000 / 6600C08VE-80 800 / 31.50 1330 / 52.36 1520 / 59.84 1380 / 54.33 300 / 0.39 9 390 /858 3000 / 6600Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard * incl. teethExchangeable Shells C08VE-SType Width E Volume Number of Self weight Load capacity
(mm/in) (litre/c.y.) teeth (kg/lbs) (kg)C08VE-32S 325 / 12.80 115 / 0.15 3 130 / 286 3000 / 6600C08VE-40S 400 / 15.75 145 / 0.19 3 135 / 297 3000 / 6600C08VE-50S 500 / 19.69 185 / 0.24 5 145 / 319 3000 / 6600C08VE-60S 600 / 23.62 220 / 0.29 5 155 / 341 3000 / 6600C08VE-80S 800 / 31.50 300 / 0.39 9 190 / 418 3000 / 6600Please note: exchangeable shells for special applications on requestKINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 04 F140-30USE 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270
AccessoriesType Description
KM 501 1t-8t upper suspension without pendulum damperKM 511 1t-8t upper suspension with pendulum damperSW03 cardanic adapter for Lehnhoff grab exchange system SW/MS03 without suspension – up to 5t / 11000 lbsSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbsKM 680 5t-8t scraperRequirements of Excavator
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 90 l/min / 10.57 - max. 23.78 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
C08VE
Rock Grab
Pipe Grab
Timber Grab
Clamshell Bucket
Multi Purpose Grab
Well Shaft Grab
Operating Module
Clamshell Bucket with exchangeable shells and vertical cylinder for excavators from 4t / 8800 lbs to 9t / 19800 lbs operating weight – through quick and easy exchange of shells ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.
l Economic solution as only the shells have to be exchanged for another application – bucket carrier, hydraulic cylinder and bearings are integrated into the unit.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces
(26 kN / 5720 lbf at an operating pressure of 32 MPa / 4608 psi).
EA
C m
ax
C m
in
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany27
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C10H
Clamshell Bucket C10HType Width E Opening A Height C max. Volume Number of Self weight Load capacity
(mm/in) (w/o teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) teeth (kg/lbs) (kg/lbs)C10H-40 400 / 15.75 1425 / 56.10 1150 / 45.28 170 / 0.22 3 285 / 627 3000 / 6600C10H-50 500 / 19.69 1425 / 56.10 1150 / 45.28 220 / 0.29 5 305 / 671 3000 / 6600C10H-65 650 / 25.59 1425 / 56.10 1150 / 45.28 290 / 0.38 5 320 / 704 3000 / 6600C10H-80 800 / 31.50 1425 / 56.10 1150 / 45.28 355 / 0.46 9 345 / 759 3000 / 6600C10H-100 1000 / 39.37 1425 / 56.10 1150 / 45.28 450 / 0.59 9 375 / 825 3000 / 6600C10H-120 1200 / 47.24 1425 / 56.10 1150 / 45.28 540 / 0.71 9 400 / 880 3000 / 6600
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 06 F140-40 84 x 40 / 3.31 x 1.57 1000 / 740 8500 / 6270
AccessoriesType Description
KM 501 6t-12t upper suspension without pendulum damperKM 511 6t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 9t-12t scraper
Requirements of ExcavatorOperating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 15 - max. 50 l/min / 3.96 - max. 13.21 GPM
Technical Drawings
Robust clamshell bucket for excavators up to 10t / 22000 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system.
l Maximum loading height is achieved through the compact design.
l Excellent digging characteristics are the result of high closing forces (37 kN / 8140 lbf at an operating pressure of 32 MPa / 4608 psi).
Cm
ax
EA
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany28
Clamshell Bucket
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C12H
Clamshell Bucket C12H
Type Width E Opening A Height C max. Volume Number Self weight Load capacity(mm/in) (incl. teeth) (mm/in) (incl. teeth) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C12H-40 400 / 15.75 1485 / 58.46 1250 / 49.21 170 / 0.22 3 345 / 759 3000 / 6600C12H-50 500 / 19.69 1485 / 58.46 1250 / 49.21 220 / 0.29 5 370 / 814 3000 / 6600C12H-65 650 / 25.59 1485 / 58.46 1250 / 49.21 290 / 0.38 5 390 / 858 3000 / 6600C12H-80 800 / 31.50 1485 / 58.46 1250 / 49.21 355 / 0.46 9 425 / 935 3000 / 6600C12H-100 1000 / 39.37 1485 / 58.46 1250 / 49.21 450 / 0.59 9 455 / 1001 3000 / 6600
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 07 F180-40 84 x 40 / 3.31 x 1.57 2000 / 1475 15000 / 11060
Accessories
Type Description
KM 501 6t-12t upper suspension without pendulum damperKM 511 6t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t / 41800 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 9t-12t scraper
Requirements of Excavator
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
Robust clamshell bucket for excavators from 9t / 19800 lbs to 12t / 26400 lbs operating weight.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system.
l Maximum loading height is achieved through the compact design.
l Excellent digging characteristics are the result of high closing forces (37 kN / 8140 lbf at an operating pressure of 32 MPa / 4608 psi).
A
Cmax
E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany29
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
C12VEClamshell Bucket with exchangeable shells and vertical cylinders for excavators from 9t / 19800 lbs to 12t / 26400 lbs operating weight – through quick and easy exchange of shells, the C12VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs and more. The shells can be changed in less than four minutes.
l Economic solution as only the shells have to be exchanged to switch applications – bucket carrier, hydraulics and bearings are integrated into the main carrier.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system. l Excellent digging characteristics are the result of high closing forces
(39 kN / 8580 lbf at an operating pressure of 32 MPa / 4608 psi).
Clamshell Bucket C12VE
Type Width E Opening A* Height C max.* Length F Volume Number Self weight Load capacity(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C12VE-32 325 / 12.80 1645 / 64.76 1570 / 61.81 1350 / 53.15 125 / 0.16 3 475 / 1045 4500 / 9900C12VE-40 400 / 15.75 1645 / 64.76 1570 / 61.81 1350 / 53.15 160 / 0.21 3 485 / 1067 4500 / 9900C12VE-50 500 / 19.69 1645 / 64.76 1570 / 61.81 1350 / 53.15 200 / 0.26 5 500 / 1100 4500 / 9900C12VE-60 600 / 23.62 1645 / 64.76 1570 / 61.81 1350 / 53.15 245 / 0.32 5 515 / 1133 4500 / 9900C12VE-70 700 / 27.56 1645 / 64.76 1570 / 61.81 1350 / 53.15 285 / 0.37 7 525 / 1155 4500 / 9900C12VE-80 800 / 31.50 1645 / 64.76 1570 / 61.81 1350 / 53.15 330 / 0.43 9 535 / 1177 4500 / 9900
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 10 F275-50 110 x 50 / 4.33 x 1.97 2000 / 1475 14000 / 10325
Accessories
Type Description
KM 501 9t-12t upper suspension without pendulum damperKM 511 9t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 without suspension – up to 12t / 26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t / 41800 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper
Requirements of Excavator
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
Clamshell Bucket with Exchangeable Shells
Railroad Grapple
Clamshell Bucket
Multi-Purpose Grapple
Rock Grapple
Logging Grapple
Operating Module C12VE
Clamshell Bucket
Pipe Grapple
Well Shaft Grapple
Excavating GrappleF EA
C m
ax
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany30
1 t 2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t
Exchangeable ShellsC12VEExchangeable Shells for C12VE
Shells are interchangeable and available in all widths. Rapid exchange with shell stand and pin exchange tool
Type Width Opening Height Volume Number Weight Self Load Closingoverall of teeth of shells weight capacity force
(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kg/lbs) (kN/lbf )Clamshell Bucket
C12VE-32S 325 / 12.80 1535 / 60.43 1570 / 61.81 125 / 0.16 3 130 / 286 480 / 1056 4500 / 9900 39 / 8580C12VE-40S 400 / 15.75 1535 / 60.43 1570 / 61.81 160 / 0.21 3 140 / 308 495 / 1089 4500 / 9900 39 / 8580C12VE-50S 500 / 19.69 1535 / 60.43 1570 / 61.81 200 / 0.26 5 165 / 363 515 / 1133 4500 / 9900 39 / 8580C12VE-60S 600 / 23.62 1535 / 60.43 1570 / 61.81 245 / 0.32 5 180 / 396 530 / 1166 4500 / 9900 39 / 8580C12VE-70S 700 / 27.56 1535 / 60.43 1570 / 61.81 285 / 0.37 7 205 / 451 555 / 1221 4500 / 9900 39 / 8580C12VE-80S 800 / 31.50 1535 / 60.43 1570 / 61.81 330 / 0.43 9 225 / 495 575 / 1265 4500 / 9900 39 / 8580
Excavating Grab
C12VE-32S EG 325 / 12.80 1200 / 47.24 1350 / 53.15 90 / 0.12 3 110 / 242 450 / 990 4500 / 9900 52 / 11440C12VE-40S EG 400 / 15.75 1100 / 43.31 1355 / 53.35 55 / 0.07 3 125 / 275 475 / 1045 4500 / 9900 55 / 12100C12VE-80S EG 800 / 31.50 800 / 31.50 1350 / 53.15 100 / 0.13 9 155 / 341 505 / 1111 4500 / 9900 63 / 13860
Pipe Grab
C12VE-80S PG 800 / 31.50
Ø75-560 / 2.95-22.05
1590 / 62.60 - - 145 /
319485 / 1067
4500 / 9900
39 / 8580
Well Shaft Grab
C12VE-100S WSG Ø1000 / 39.37 1000 / 39.37 1320 / 51.97 100 / 0.13 5 140 / 308 480 / 1056 4500 / 9900 60 / 13200Anmerkung: Grössere Schalen on request lieferbar
Multi Purpose Grab
A12VE-94S 940 / 37.01 1850 / 72.83 1695 / 66.73 400 / 0.52 - 205 / 451 550 / 1210 4500 / 9900 39 / 8580A12VE-122S 1220 / 48.03 1850 / 72.83 1695 / 66.73 600 / 0.78 - 240 / 528 595 / 1309 4500 / 9900 39 / 8580
Rock Grab
R12VE-48S 480 / 18.90
1850 / 72.83
1790 / 70.47
0,50 m2/ 0.33 cords - 200 /
440555 / 1221
4500 / 9900
30 / 6600
Timber Grab
T12VE-47S 470 / 18.50
1835 / 72.24
1795 / 70.67
0,50 m2/ 0.33 cords - 180 /
396535 / 1177
4500 / 9900
30 / 6600
Railroad Grab
C12VE-50S RG 500 / 19.69 1350 / 53.15 1405 / 55.31 - - 135 / 297 485 / 1067 4500 / 9900 44 / 9680
Package consists of: exchangeable buckets, shell stand and pin exchange tool
Please note: special buckets are availabe on request
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany31
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Clamshell Bucket with Exchangeable Shells
Railroad Grapple
Clamshell Bucket
Multi-Purpose Grapple
Rock Grapple
Logging Grapple
Operating Module C18VE
Clamshell Bucket
Pipe Grapple
Well Shaft Grapple
Excavating Grapple
Clamshell Bucket with exchangeable shells and vertical cylinders for excavators up to 18t / 39600 lbs operating weight – through quick and easy exchange of shells, the C18VE is ideal for different applications, for excavation operations, landscaping, trench digging, handling of logs etc. The shells can be changed in less than four minutes.
l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated into the main carrier.
l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting edges.
l Reduced wear resulting from generously dimensioned bearing system with special coating.
l Excellent digging characteristics are the result of high closing forces (42 kN / 9240 lbf at an operating pressure of 35 MPa / 5040 psi).
C18VE
Clamshell Bucket C18VE
Type Width E Opening A* Height C max.* Length Volume Number Self weight Load capacity(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)
C18VE-33 335 / 13.19 1650 / 64.96 1595 / 62.80 1360 / 53.54 125 / 0.16 3 590 / 1298 4500 / 9900C18VE-40 400 / 15.75 1650 / 64.96 1595 / 62.80 1360 / 53.54 160 / 0.21 3 605 / 1331 4500 / 9900C18VE-50 500 / 19.69 1650 / 64.96 1595 / 62.80 1360 / 53.54 200 / 0.26 5 630 / 1386 4500 / 9900C18VE-60 600 / 23.62 1650 / 64.96 1595 / 62.80 1360 / 53.54 245 / 0.32 5 655 / 1441 4500 / 9900C18VE-80 800 / 31.50 1650 / 64.96 1595 / 62.80 1360 / 53.54 330 / 0.43 9 705 / 1551 4500 / 9900C18VE-100 1000 / 39.37 1650 / 64.96 1595 / 62.80 1360 / 53.54 415 / 0.54 9 755 / 1661 4500 / 9900
Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth
KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.
Type Upper connection Torque Moment of deflection(width x pin-Ø) max.
(mm/in) (Nm / ft.lbs) (Nm / ft.lbs)KM 10 F275-60 125 x 60 / 4.92 - 2.36 1500 / 1105 14000 / 10325
Accessories
Type Description
KM 501 13t-25t upper suspension without pendulum damperKM 511 13t-25t upper suspension with pendulum damperSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t / 41800 lbsSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 without suspension – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 C12VE/C18VE scraper
Requirements of Excavator
Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
A E
C m
ax
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany32
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Exchangeable ShellsC18VEExchangeable Shells for C18VE
Shells are interchangeable and available in all widths. Rapid exchange with exchanging support and extraction tool.
Type Width Opening Height Volume Number Weight Self Load Closingoverall of teeth of shells weight capacity force
(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kg/lbs) (kN/lbf )Clamshell Bucket
C18VE-33S 335 / 13.19 1535 / 60.43 1595 / 62.80 125 / 0.16 3 160 / 352 545 / 1199 4500 / 9900 42 / 9240C18VE-40S 400 / 15.75 1535 / 60.43 1595 / 62.80 160 / 0.21 3 180 / 396 565 / 1243 4500 / 9900 42 / 9240C18VE-50S 500 / 19.69 1535 / 60.43 1595 / 62.80 200 / 0.26 5 195 / 429 580 / 1276 4500 / 9900 42 / 9240C18VE-60S 600 / 23.62 1535 / 60.43 1595 / 62.80 245 / 0.32 5 225 / 495 610 / 1342 4500 / 9900 42 / 9240C18VE-80S 800 / 31.50 1535 / 60.43 1595 / 62.80 330 / 0.43 9 275 / 605 660 / 1452 4500 / 9900 42 / 9240C18VE-100S 1000 / 39.37 1535 / 60.43 1595 / 62.80 415 / 0.54 9 325 / 715 710 / 1562 4500 / 9900 42 / 9240
Excavating Grab
C18VE-33S EG 335 / 13.19 1205 / 47.44 1430 / 56.30 90 / 0.12 3 125 / 275 510 / 1122 4500 / 9900 57 / 12540C18VE-40S EG 400 / 15.75 1120 / 44.09 1385 / 54.53 55 / 0.07 3 130 / 407 515 / 1133 4500 / 9900 60 / 13200C18VE-80S EG 800 / 31.50 820 / 32.28 1380 / 54.33 100 / 0.13 9 185 / 407 570 / 1254 4500 / 9900 69 / 15180
Pipe Grab
C18VE-83S PG 830 / 32.68 Ø100 - 600 / 3.94-23.62 1625 / 63.98 - - 295 / 649* 680 / 1496* 4500 / 9900 41 / 9020
* : incl. supportWell Shaft Grab
C18VE-97S WSG Ø 970 / 38.19 970 / 38.19 1410 / 55.51 110 / 0.14 5 170 / 374 555 / 1221 4500 / 9900 65 / 14300Please note: larger grabs are available on request
Multi Purpose Grab
A18VE-95S 955 / 37.60 1830 / 72.05 1685 / 66.34 400 / 0.52 - 340 / 748 725 / 1595 4500 / 9900 41 / 9020A18VE-122S 1220 / 48.03 1835 / 72.24 1725 / 67.91 600 / 0.78 - 275 / 605 660 / 1452 4500 / 9900 32 / 7040
Rock Grab
R18VE-49S 490 / 19.29 1850 / 72.83 1820 / 71.65 0,50 m2/ 0.33 cords - 195 / 429 580 / 1276 4500 / 9900 33 / 7260
Timber Grab
T18VE-49S-0,5 490 / 19.29 1830 / 72.05 1825 / 71.85 0,50 m2 / 0.33 cords - 200 / 440 585 / 1287 4500 / 9900 30 / 6600
T18VE-49S-0,6 490 / 19.29 1975 / 77.76 1905 / 75.00 0,60 m2 / 0.40 cords - 220 / 484 605 / 1331 4500 / 9900 33 / 7260
Railroad Grab
C18VE-50S RG 500 / 19.69 1250 / 49.21 1400 / 55.12 - - 130 / 286 515 / 1133 4500 / 9900 44 / 9680
Package consists of: exchangeable buckets, shell stand and pin exchange tool
Please note: special buckets are availabe on request
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany33
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Clamshell Bucket with Exchangeable ShellsClamshell bucket with exchangeable shells and two vertical cylinders for excavators up to 25t / 55000 lbs operating weight. The shells can be changed in less than four minutes.
l An economic solution as only the shells have to be exchanged to suit application – bucket carrier, hydraulics and bearings are integrated in the unit.l Long life is ensured due to the use of 500 HB in the manufacture of cutting edges.l Reduced wear resulting from generously dimensioned bearing system with special coating.l Excellent digging characteristics are the result of high closing forces (60 kN / 13200 lbf at an operating pressure of 35 MPa / 5040 psi).
C25VE
Clamshell Bucket C25VEType Width E Opening A Height C max. Length F Volume Number Self weight Load capacity
(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) of teeth (kg/lbs) (kg/lbs)C25VE-42 425 / 16.73 2015 / 79.33 1595 / 62.80 1360 / 53.54 210 / 0.27 3 1080 / 2376 6000 / 13200C25VE-50 500 / 19.69 2015 / 79.33 1595 / 62.80 1360 / 53.54 250 / 0.33 4 1115 / 2453 6000 / 13200C25VE-60 600 / 23.62 2015 / 79.33 1595 / 62.80 1360 / 53.54 305 / 0.40 5 1150 / 2530 6000 / 13200C25VE-80 800 / 31.50 2015 / 79.33 1595 / 62.80 1360 / 53.54 410 / 0.54 7 1220 / 2684 6000 / 13200C25VE-100 1000 / 39.37 2015 / 79.33 1595 / 62.80 1360 / 53.54 520 / 0.68 7 1290 / 2838 6000 / 13200C25VE-120 1200 / 47.24 2015 / 79.33 1595 / 62.80 1360 / 53.54 625 / 0.82 9 1360 / 2992 6000 / 13200Package consists of: clamshell bucket, bolt-on teeth, KINSHOFER rotator, non-return valve and hose guard, 2 welded eyes * incl. teeth
Exchangeable Shells C25VE-SType Width E Volume Number of Self weight Load capacity
(mm/in) (litre) teeth (kg/lbs) (kg/lbs)C25VE-42S 425 / 16.73 210 / 0.27 3 370 / 814 6000 / 13200C25VE-50S 500 / 19.69 250 / 0.33 4 405 / 891 6000 / 13200C25VE-60S 600 / 23.62 305 / 0.40 5 440 / 968 6000 / 13200C25VE-80S 800 / 31.50 410 / 0.54 7 510 / 1122 6000 / 13200C25VE-100S 1000 / 39.37 520 / 0.68 7 580 / 1276 6000 / 13200C25VE-120S 1200 / 47.24 625 / 0.82 9 650 / 1430 6000 / 13200Please note: exchangeable shells for special applications
KINSHOFER Rotator Continuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.Type Upper connection Torque Moment of deflection
(width x pin-Ø) max.(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)
KM 15 F340/220 180 x 70 / 7.09 x 2.76 3000 / 2215 25000 / 18435
AccessoriesType DescriptionKM 501 19t-60t upper suspension without pendulum damperKM 511 19t-60t upper suspension with pendulum damperSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers availableKM 680 C25VE scraper
Requirements of Excavator Technical DrawingsOperating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 75 l/min / 5.28 - max. 19.82 GPM
Rock Grab
Pipe Grab
Timber Grab
Clamshell Bucket
Multi Purpose Grab
Well Shaft Grab
Operating Module
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany34
8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Multi Purpose GrabsA12H / A15H / A20H / A27HRobust multi purpose grab for excavators up to 12t / 26400 lbs, 15t / 33000 lbs, 20t / 44000 lbs or 27t / 59400 lbs operating weight - ideal for landscaping architecture.
l Efficient tool for the exact positioning of natural rocks and for the handling of filling material – without additional set-up times.
l The sophisticated ergonomics and the design of the shells enables loading, sorting, digging and demolition operations with maximum efficiency.
l Rigid mounting at the tilting joint of the bucket cylinder of the excavator guarantees precise positioning.
l The grab requires three hydraulic functions including the bucket cylinder.l Long life is ensured due to the use of 500 HB steel in the manufacture of cutting
edges.l From A15H: robust, fully integrated rotation with sturdy slewing ring to withstand
external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. A12H: KM 15 F273/273.
Multi Purpose Grabs A12H / A15H / A20H / A27HType Width Opening Height Gripping Volume Number Self
weightLoad
capacityClosing
forceTorque Operating
E A C max. range D min. of teeth weight(mm/in) (mm/in) (mm/in) � (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm) (t/lbs)
A12H-60 600 / 23.62
1870 /73.62
1350 / 53.15 605 / 23.82 260 / 0.34 5 550 / 1210 3000 /
66000 30 / 6600 2000 / 1475
8-12 /17600-26400
A15H-60 600 / 23.62
1880 / 74.02
1410 / 55.51 610 / 24.02 300 / 0.39 5 690 / 1518 4000 /
8800 27 / 5940 3000 / 2215
11-15 /24200-33000
A20H-70 700 / 27.56
2000 / 78.74
1430 / 56.30 550 / 21.65 400 / 0.52 7 1035 / 2277 5000 /
11000 40 / 8800 4000 / 2950
14-20 / 30800-44000
A27H-80 800 / 31.50
2100 / 82.68
1685 / 66.34 515 / 20.28 500 / 0.65 5 1500 / 3300 6000 /
13200 63 / 13860 5000 / 3687
18-27 /39600-59400
Package consists of: multi purpose grab, bolt-on teeth, integrated rotation with sturdy slewing ring (A12H: rotator KM 15 F273/273), non-return valve
AccessoriesType Description
KM 691 15t adapter connection plate for specific solutions – up to 15t / 33000 lbsKM 691 20t adapter connection plate for specific solutions – up to 20t / 44000 lbsKM 691 27t adapter connection plate for specific solutions – up to 27t / 59400 lbsKM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on-adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers available
Requirements of ExcavatorOperating pressure (open/close): A12 - A20: max. 32 Mpa (320 bar) / 4608 psi; A27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): A12 - A27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): A12 - A20: G 3/4“ / G 1/2“; A27: G 1“ / G 1/2“Operating pressure (rotation): A12: max. 32 MPa (320 bar) / 4608 psi; A15 - A27: max. 17 MPa (170 bar) / 2448 psi Recommended oil flow (rotation): A12: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM; A15 - A27: 25 - max. 60 l/min / 6.61 - max.15.85 GPM
Technical Drawings
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany35
8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Demolition and Sorting Grabs D15H to D27H / D12H-P to D27H-P
D27H-P
Robust multi purpose grab for excavators up to 12t / 26400 lbs, 15t / 33000 lbs, 20t / 44000 lbs or 27t / 59400 lbs operating weight – ideal for demolition and segmentation of all kinds of building materials. Ideal for separating building debris and similar material.
l The grab is available with ribs or a perforated skin – both versions let fine dust and gravel through. The durable cutting edges can retain different materials, using the edge tips.l Long life is ensured due to the use of 500 HB steel in the manufacture of
replaceable cutting edges.l From D15H/D15H-P: robust, fully integrated rotation with sturdy slewing ring to withstand external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge. D12H-P: KM 15 F273/273.l Exceptional closing forces through two horizontally positioned hydraulic
cylinders that are protected by the bucket carrier.l Cylinders are hydraulically cushioned.
Demolition and Sorting Grabs with metal ribs D15H / D20H / D27HType Width Opening Height Height Volume Weight Load
capacityClosing Torque Operating
weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm/ft.lbs) (t)
D15H-80 800 / 31.50
1540 / 60.63
1210 / 47.64
1070 / 42.13 300 / 0.39 655 / 1441 4000 /
8800 36 / 7920 3000 / 2215
11-15 / 24200-33000
D20H-100 1000 / 39.37
1925 / 75.79
1450 / 57.09
1235 / 48.62 450 / 0.59 1050 / 2310 5000 /
11000 42 / 9240 4000 / 2950
14-20 / 30800-44000
D27H-115 1150 / 45.28
2140 / 84.25
1615 / 63.58
1410 / 55.51 800 / 1.05 1585 / 3487 6000 /
13200 63 / 13860 5000 / 3690
20-27 / 44000-59400
Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valveDemolition and Sorting Grabs with perforated shells D12H-P / D15H-P / D20H-P / D27H-PType Width Opening Height Height Volume Weight Load
capacityClosing Torque Operating
weightE A C max. C min. force(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs) (kN/lbf ) (Nm/ft.lbs) (t)
D12H-P-60 600 / 23.62
1550 / 61.02
1125 / 44.29
980 / 38.58 225 / 0.29 470 / 1034 3000 /
6600 36 / 7920 3000 / 2215
8-12 / 17600-26400
D15H-P-80 800 / 31.50
1540 / 60.63
1210 / 47.64
1070 / 42.13 300 / 0.39 650 / 1430 4000 /
8800 36 / 7920 3000 / 2215
11-15 / 24200-33000
D20H-P-100 1000 / 39.37
1925 / 75.79
1450 / 57.09
1235 / 48.62 450 / 0.59 1020 / 2244 5000 /
11000 42 / 9240 4000 / 2950
14-20 / 30800-44000
D27H-P-115 1150 / 45.28
2140 / 84.25
1615 / 63.58
1410 / 55.51 800 / 1.05 1485 / 3267 6000 /
13200 63 / 13860 5000 / 3690
20-27 / 44000-59400
Package consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring (D12H-P: rotator KM 15 F273/273), cutting edges andnon-return valve
Accessories Type DescriptionKM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbs
adapter for quick exchange systems from other manufacturers availableKM 685 09 E bolt on side platesKM 685 10 retrofitted plate to close backside for handling of small material
D12H-P with perforated
shells
D27H with metal ribs
Requirements of ExcavatorOperating pressure (open/close): D12 - D20: max. 32 Mpa (320 bar) / 4608 psi; D27: max. 35 Mpa (350 bar) / 5040 psiRecommended oil flow (open/close): D12 - D27: 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): D12 - D20: G 3/4“ / G 1/2“; D27: G 1“ / G 1/2“
Operating pressure (rotation): D12: max. 20 MPa (200 bar) / 2880 psi; D15: max. 15 MPa (150 bar) / 2160 psi D20 - D27: max. 17 MPa (170 bar) / 2448 psi
Recommended oil flow (rotation): D12 - D27: 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany36
Heavy Duty Demolition and Sorting Grabs
10 t 20 t … …27 t …35t …40 t 50 t 60 t… 70 t……
D15H-P HD to D32H-P HD
Demolition and Sorting Grabs with perforated shells D15H-P -75HD up to D32H-P110HDType Width E Opening A Height C Volume Weight Load capacity Closing Torque Operating
(mm/in) (mm/in) max. (mm/in) (litre/c.y.) (kg/lbs) (kg) force (kN/lbf ) (Nm/ft.lbs) weight (t)
D15H-P-75HD 750 / 29.53
1730 / 68.11
1295 / 50.98
340 / 0.44
860 / 1892
5000 / 11000
43 / 9460
3000 / 2215
10-18 / 22000-39600
D16H-P-90HD 900 / 35.43
1730 / 68.11
1295 / 50.98
415 / 0.54
900 / 1980
5500 / 12100
43 / 9460
3000 / 2215
12-20 / 26400-44000
D19H-P-85HD 850 / 33.46
1725 / 67.91
1320 / 51.96
365 / 0.48
1030 / 2266
6500 / 14300
50 / 11000
3000/5700 / 2215/4205*
12-24 / 26400-52800
D20H-P-100HD 1000 / 39.37
1865 / 73.43
1400 / 55.11
460 / 0.60
1120 / 2464
7000 / 15400
50 / 11000
3000/5700 / 2215/4205*
13-25 / 28600-55000
D24H-P-100HD 1000 / 39.37
1970 / 77.56
1455 / 57.28
570 / 0.75
1315 / 2893
8000 / 17600
56 / 12320
3000/5700 / 2215/4205*
15-30 / 33000-66000
D32H-P-110HD 1100 / 43.34
2190 / 86.22
1565 / 61.61
825 / 1.08
1820 / 4004
10500 / 23100
70 / 15400
7000 / 5165**
20-40 / 44000-88000
Optional second heavy duty motor for D19H-P HD, D20H-P HD, D24H-P HD Notes: * optional with 2 motors for rotation ** second heavy duty hydraulic motor comes standardPackage consists of: demolition and sorting grab, integrated rotation with sturdy slewing ring, cutting edges and non-return valve
Accessories Type Description
KM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsKM 690 32t adapter for rigid mounting – up to 32t / 70400 lbsOQ bolt-on adapter for Oilquick OQ – 5t to 70t / 11000 lbs to 154000 lbsSW rigid bolt-on adapter SW for Lehnhoff quick change system MS/HS for rigid mounting – 2t up to 120t / 4400 lbs up to 264000 lbs
adapter for quick exchange systems from other manufacturers available
Robust multi purpose grab with perforated shells for excavators up to 40t / 88000 lbs operating weight. The D-HD series grabs are ideal for demolition and sorting of all kinds of building materials. l Robust Delta-box frame with dust-proof axle bearing points.l Perforated shells let fine dust and gravel through without large
pieces getting caught. l Durable and reversable cutting edges, made of Cracox Plus 450 steel can be used to pick up different materials, with their tips.l Cutting edges on D19H-P-HD series and higher can be turned three ways, reducing replacement costs.l Robust, fully integrated rotator with sturdy slewing ring to
withstand external forces, with pressure relief valve to ensure overload protection, and connecting hoses protected inside the hub.
l Exceptional closing forces achieved with a horizontally positioned hydraulic cylinder that is protected by the bucket carrier.
l Cylinder is hydraulically cushioned.D32H-P-HD
D32H-P-HD
Requirements of ExcavatorOperating pressure (open/close): D15 - D32: max. 35 MPa (350 bar) / 5040 psi
Recommended oil flow (open/close): D15 - D16: max. 80 l/min / max. 21.14 GPM; D19 - D24: max. 100 l/min / max. 26.42 GPM; D32: max. 120 l/min / max. 31.70 GPM
Hydraulic connection (grab/rotate): D15 - D24: G 3/4“ / G 1/2“; D32: G 1“- 25S / G 1/2“ Operating pressure (rotation): D15 - D32: max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotation): D15 - D24: max. 40 l/min / max. 10.57 GPM; D32: 40 - max. 60 l/min / 10.57 - max. 15.85 GPM
Technical Drawings
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany37
2 t 3 t 4 t 5 t 6 t 7 t 8 t 9 t 10 t 11 t 12 t 13 t
Rock Grab R12H
Rock grab for excavators from 6t / 13200 lbs to 13t / 28600 lbs operating weight for positioning and handling of natural rocks.
l Economic rock grab for cardanic mounting.l Long life due to the use of 500 HB steel and exchangeable forged tooth. l Robust, fully integrated rotator that is fixed at 4 points to withstand external
forces, with a pressure relief valve to ensure overload protection and connecting hoses located inside the hub.
l Exceptional closing forces through two horizontally positioned hydraulic cylinders that are protected by the bucket carrier.
l Larger gripping volume due to widely spaced pivots.l Integrated non-return-valve guarantees secure handling of loads.
Rock Grab R12H
Type Width Opening A Height C Volume Self Load OperatingE (w/o teeth) max. weight capacity weight
(mm/in) (mm/in) (mm/in) (m2/cords) (kg/lbs) (kg/lbs) (t/lbs)R12H-0,35 480 / 18.90 1780 / 70.08 1250 / 49.21 0,35 / 0.23 365 / 803 3000 / 6600 6 - 13 / 13200 - 28600
Package consists of: rock grab, KINSHOFER rotator, hose guard and non-return valve
KINSHOFER Rotator
Type Upper connection Torque Moment of deflection(width/Ø-hole pattern) max.
(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 07 F180-40 84 x 40 / 3.31 x 1.57 2000 / 1475 15000 / 11065
Accessories
Type Description
KM 501 6t-12t upper suspension without pendulum damperKM 511 6t-12t upper suspension with pendulum damperSW08 cardanic adapter for Lehnhoff grab exchange system SW/MS08 for rigid mounting – up to 12t / 26400 lbsSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbs
adapter for quick exchange systems from other manufacturers availableKM 681 800 bolt-on shells to handle loose material: width 800 mm / 31.50 in, volume 225 litre / 0.29 c.y.KM 681 1000 bolt-on shells to handle loose material: width 1000 mm / 39.37 in, volume 275 litre / 0.36 c.y.KM 682 bucket mounting stand for quick change of shells
Requirements of Excavator
Operating pressure (open/close): max. 32 Mpa (320 bar) / 4608 psiRecommended oil flow (open/close): 35 - max. 120 l/min / 9.25 - max. 31.70 GPMHydraulic connection (grab/rotate): G 1/2“ / M27 x 2Operating pressure (rotation): max. 32 Mpa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM
Technical Drawings
A E
90
40O 84
C m
ax
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany38
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Rock Grabs
R20H
R27H
R20H / R27H
Requirements of ExcavatorR20H R27H
Operating pressure (open/close): max. 32 Mpa (320 bar) / 4608 psi max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 75 - max. 150 l/min / 19.82 - max. 39.63 GPM 75 - max. 150 l/min / 19.82 - max. 39.63 GPMHydraulic connection (grab/rotate): G 3/4“ / G 1/2“ G 3/4“ / G 1/2“ Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psi max. 17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation): 25 - max. 60 l/min / 6.61 - max. 15.85 GPM 25 - max. 60 l/min / 6.61 - max. 15.85 GPM
Technical Drawings
Rock Grabs R20H / R27H
Type Width Opening Height Volume Weight Load Torque OperatingE A C max. capacity weight
(mm/in) (mm/in) (mm/in) (m2/cords) (kg/lbs) (kg/lbs) (Nm/ft.lbs) (t/lbs)R20H-0,40 720 / 28.35 1800 / 70.87 1340 / 52.76 0,40 / 0.27 1050 / 2310 5000 / 11000 4000 / 2950 14 – 20 / 30800 - 44000R27H-0,55 840 / 33.07 2040 / 80.31 1500 / 59.06 0,55 / 0.37 1500 / 3300 6000 / 13200 5000 / 3690 18 – 27 / 39600 - 59400
Package consists of: rock grab, integrated rotation with sturdy slewing ring and non-return valve
Accessories
Type Description
KM 690 20t adapter for rigid mounting – up to 20t / 44000 lbsKM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbsKM 501 19t-60t upper suspension without pendulum damperKM 511 19t-60t upper suspension with pendulum damperKM 693 01 adapter for cardanic mounting R20HKM 693 02 adapter for cardanic mounting R27H
Rock grab for excavators from 14t / 30800 lbs to 27t / 59400 lbs operating weight for positioning and handling of natural rocks.
l R20H and R27H are rock grabs for rigid mounting or cardanic mounting.l Long life due to the use of cutting edges made out of 500HB steel.l Robust, fully integrated rotation with sturdy slewing ring to withstand
external forces, with connecting hoses located inside the hub. Hydraulic quick exchange systems are mountable directly. Integrated pressure relief valve against overcharge.
l Exceptional closing forces through two horizontally positioned hydraulic cylinders that are protected by the bucket carrier.
l Larger gripping volume due to widely spaced pivots.l Integrated non-return-valve guarantees secure handling of loads.l Cylinders are hydraulically cushioned.
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany39
12 t 13 t 14 t 15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t 23 t 24 t 25 t 26 t 27 t
Barrier Lifter KM 932MBThe KM 932MB barrier lifter is a mechanical grab for fast and convenient handling of concrete barriers and blocks.
l Safe: Carbide gripping pads ensure safe operation, even on wet or coated surfaces.
l Efficient: The fully integrated, mechanically operated “latch & release” system allows the unit to function independently, without assistance from an additional operative.
l Versatile: Multi-position arms are a standard feature. This means one unit can achieve different gripping ranges by simply changing the position of four pins.
l Cost-effective: The elimination of slings and chains means more cycles can be achieved per hour.
l Fast: The “latch & release” system functions automatically each time the load line is slackened.
Barrier Lifter KM 932MB
Type Opening range A Self weight Load capacity Operating weight(min./max.)
(mm/in) (kg/lbs) (kg/lbs) (t/lbs)KM 932MB-6/10 120 – 305 / 4.72 - 12.01 165 / 363 6580 / 14476 18 - 27 / 39600 - 59400KM 932MB-12/14 295 – 395/ 11.61 - 15.55 145 / 319 6580 / 14476 18 - 27 / 39600 - 59400
Technical Drawings
KM 932MB-12/14
32
1
Absteckung durch Bolzenadjustment of openingrange by pin
Arm 1
Arm 2
40
29O
870
25
Ö�nungsbereichopening range
Klemmbereich clamping range
785
optische Kraftanzeigeoptical power indicator
Arm 1
Arm 2
1234
29
40
875
785
25
Ö�nungsbereich opening range
Klemmbereichclamping range A
Absteckung durch Bolzenadjustment of openingrange by pin
optische Kraftanzeigeoptical power indicator
O
KM 932MB-6/10
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany40
ManipulatorsKM 930EThe KM 930E Manipulator is the ideal tool to lift and position tubes and poles - for excavators with 7t - 12t / 15400 - 26400 lbs or with 16t - 25t / 35200 - 55000 lbs operating weight.
l Movability due to three hydraulic functions: grab and rotate (2 hydraulic circuits needed). The tilt functions is conducted by the bucketcylinder.
l Endless rotation.l High load capacities from 1000 kg / 2200 lbs to 2000 kg / 4400 lbs
can be mastered by the KINSHOFER Manipulators.l Precise positioning due to the flat 15t-rotator for KM 930-1000E, or
the integrated rotation for KM 930-2000E with 4000 Nm / 2950 ft.lbs torque.
l Secure retention of loads thanks to the integrated non-return valve and gripper pads at the tine tips.
Manipulator KM 930E
Type Load capacity Pole Ø Width Number Weight Closing force Operating(min. - max.) of tines weight excavator
(kg/lbs) (mm/in) (mm/in) (kg/lbs) (kN/lbf ) (t)
KM 930-1000E 1000 / 2200 70 - 300 / 2.76 - 11.81 1385 / 54.53 2 280 / 616 36 / 7920 7 - 12 /
15400 - 26400
KM 930-2000E 2000 / 4400 250 - 600 / 9.84 - 23.62 2180 / 85.83 4 980 / 2156 32 / 7040 16 - 25 /
35200 - 55000
Package consists of: manipulator, KINSHOFER rotation (KM 930-1000E: KM 15 F273/273; KM 930-2000E: integrated rotation), non-return valve
Note: tubes and poles must be clamped in the center of gravity
KINSHOFER Rotator Unlimited rotation. Overload protection due to pressure relief valves.
Upper connection Torque Bending moment max.Type (bores/Ø hole pattern)
(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 930-1000E: KM 15 F273/273 10 x M16 / Ø 273 / 10.75 2000 / 1475 50000 / 36875
Accessories
Type Description
KM 980-2 solenoid valve for additional oil circuit to change over to 3 circuits (for gripping, lifting, turning) when only 2 circuits are available, ready for mounting – 12 V or 24 V, working pressure max. 250 bar / 3600 psi, oil flow 60 l/min / 15.85 GPM (do-it-yourself assembly)
KM 980-2 c solenoid valve KM 980-2 complete attachment kit including assembly components, hose guard, hoses and mounting on the KM 930E manipulator – 12 V or 24 V, working pressure max. 250 bar / 3600 psi, oil flow 60 l/min / 15.85 GPM
Requirements of ExcavatorKM 930-1000E KM 930-2000E
Operating pressure (open/close): max. 32 MPa (320 bar) / 4608 psi max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (open/close): 25 - max. 75 l/min / 6.61 - max. 19.82 GPM 40 - max. 120 l/min / 10.57 - max. 31.70 GPMOperating pressure (rotation): 20 - 35 MPa (200 - 350 bar) / 2901 - 5076 psi 17 - 25 MPa (170 - 250 bar) / 2466 - 3626 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max. 13.21 GPM 40 - max. 75 l/min / 10.57 - max. 19.82 GPM
Technical Drawings
7 t 8 t 9 t 10 t 11 t 12 t 13 t 14 t 15 t 16 t ... 20 t 21 t 22 t ... 25 t
KM 930-1000E KM 930-2000E
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany41
Compactor / Multi Purpose Compactor
MAV CompactorType Length A Width B Height C Weight Frequency Compactor Operating
(mm/in) (mm/in) (mm/in) (kg/lbs) (Hz) force (kg/lbs) weight (t/lbs)MAV 08 650 / 25.59 400 / 15.75 430 / 16.93 180 / 396 75 3500 / 77000 1 - 8 / 2200 - 17600MAV 18 900 / 35.43 600 / 23.62 560 / 22.05 380 / 836 60 7500 / 16500 9 - 18 / 19800 - 39600MAV 35 1000 / 39.37 740 / 29.13 560 / 22.05 510 / 1122 58 7500 / 16500 19 - 35 / 41800 - 77000MAV 40 1100 / 43.31 850 / 33.46 560 / 22.05 650 / 1430 58 14000 / 30800 25 - 40 / 55000 - 88000MAV 45 1100 / 43.31 850 / 33.46 700 / 27.56 750 / 1650 58 14000 / 30800 41 - 45 / 90200 - 99000Package consists of: compactor, frame, hydraulic set
MAU Multi Purpose Compactor Type Quick Length A Width B Height C Weight Frequency Compactor Operating
hitch (mm/in) (mm/in) (mm/in) (kg/lbs) (Hz) force (kg/lbs) weight (t/lbs)MAU 06 S40 550 / 51.62 400 / 15.75 430 / 16.93 180 / 396 75 3500 / 77000 1 - 6 / 2200 - 13200MAU 08 S45 / S50 710 / 27.95 600 / 23.62 560 / 22.05 220 / 484 60 3500 / 77000 5 - 8 / 11000 - 17600MAU 14 S45 / S50 760 / 29.92 740 / 29.13 560 / 22.05 380 / 836 60 7500 / 16500 9 - 14 / 19800 - 30800MAU 18 S60 885 / 34.84 850 / 33.46 560 / 22.05 510 / 1122 60 7500 / 16500 12 - 18 / 26400 - 39600MAU 24 S70 885 / 34.84 850 / 33.46 560 / 22.05 650 / 1430 58 7500 / 16500 19 - 24 / 41800 - 52800
Accessories MAUType Length A Width B Weight Cutting wheel Quick hitch Operating
(mm/in) (mm/in) (kg/lbs) (mm/in) weight (t/lbs)MVP 06 compactor plate 650 / 25.59 400 / 15.75 60 / 132 - S40 1 - 6 / 2200 - 13200MVP 08 compactor plate 900 / 35.43 600 / 23.62 120 / 264 - S45 / S50 5 - 8 / 11000 - 17600MVP 14 compactor plate 1000 / 39.37 600 / 23.62 140 / 308 - S45 / S50 9 - 14 / 19800 - 30800MVP 18 compactor plate 1100 / 43.31 740 / 29.13 220 / 484 - S60 12 - 18 / 26400 - 39600MVP 24 compactor plate 1100 / 43.31 740 / 29.13 220 / 484 - S70 19 - 24 / 41800 - 52800
ASF M 40-50 asphalt cutter - - 110 / 242 450 x 10 / 17.72 x 0.39 S40, S45 or S50 13 - 20 / 28600 - 44000ASF M 60 asphalt cutter - - 110 / 242 450 x 10 / 17.72 x 0.39 S60 21 - 24 / 46200 - 52800
RotationsType Upper connection Torque Oper. pressure Internal pressure Bending moment
(mm/in) (Nm/ft.lbs) (max. bar/psi) (bar/psi) max. (Nm/ft.lbs)KM 15 F273/273 Rotator 10 x M16 / Ø 273 / 10.75 2000 / 1475 320 / 4608 150 / 2160 50000 / 36875RD 12 F273/270 Worm Gear 16 x M16 / Ø 270 / 10.63 7500 / 5531 350 / 5040 120 / 1728 28000 / 20650
Requirements of ExcavatorOperating pressure: MAV 08 - 35 & MAU 06 - 24: min. 11 MPa (110 bar) / 1584 psi - MAV 40/45: min. 14 MPa (140 bar) / 2016 psiRecommended oil flow (min.-max.): MAV 08, MAU 06 - 08: 25-75 l/min / 6.61-19.82 GPM; MAV 18 - 35, MAU 14 - 24: 40-120 l/min / 10.57-31.70 GPM;
MAV 40 - 45: 90-130 l/min / 23.78-34.35 GPMTechnical Drawings
MAU
12 t … 18 t … 24 t … 35 t 40 t 45 t…6 t…1 t
MAV
MVP Compactor Plate
ASF MAsphalt Cutter
With the MAV high frequency Compactor, malleable, loose and semi-solid soil or gravel can be compressed and solidified conveniently and eco- nomically using an excavator – to the best advantage, in combination with a Tiltrotator. The same goes for the MAU Multi Purpose Compactor. This together with a MVP compactor plate – which can be easily exchanged with other attachments such as the asphalt cutter ASF M. Also buckets or demolition & sorting grabs can be exchanged via the quick change system for vibrating operations. For excavators from 1t / 2200 lbs to 24t / 52800 lbs operating weight (MAV: up to 45t / 99000 lbs).
l Efficiency: time saving compared to conventional manual compactors. Better for difficult to access on working sites. High compression depth.
l Safety: less risk of moving (no swinging) and compacting (no tilting) on malleable soils.
l Multi purpose: more than vertical compacting possible. With the MAU, totally new applications are possible through any kind of attachment, and easily exchanged.
l Longevity: wear parts made of special steel.
MAV / MAU
C
B A
175
132 MAV 08 with RD 12 Worm Gear
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany42
... 2 t 5 t ... 10 t ... 15 t ... 20 t 25 t 30 t 40 t 45 t 50 t
The Disc Grinder STF is the ideal tool for scoring or grinding e.g. stumps or frozen soil. For excavators with 7t / 15400 lbs to 50t / 110000 lbs operating weight. The PLB Asphalt Grinder is used to grind the bitumen sheeting layer by layer, fast and easy. For excavators with 2t / 4400 lbs to 18t / 39600 lbs operating weight. l STF: equipped with standard ripper teeth. l PLB: different widths from 300 mm / 11.81 in - 600 mm / 23.62 in,
or grind depths from 0 mm / 0 in - 150 mm / 5.91 in available.l Fast grinding of surfaces. l Special sizes available on request. l Different adapters available.
Disc Grinder STF
Type Diameter grind disc Weight Height Operating weight excavator(mm/in) (kg/lbs) (mm/in) (t/lbs)
STF 15100 1500 x 100 / 59.06 x 3.94 1300 / 2860 1900 / 74.80 7 - 50 / 15400 - 110000STF 1870 1800 x 70 / 70.87 x 2.76 1500 / 3300 2100 / 82.68 7 - 50 / 15400 - 110000
Package consists of: grinder disc, one set standard teeth, mud guard, standard suspension for nordic style coupling, motor*other adapters available on request
STF / PLB Disc and Asphalt Grinder
PLB
Grinding Cylinder of Asphalt Grinder PLB
Asphalt Grinder PLB
Type Grind width Grind depth Recommended oil flow Rotation Weight Operating Operating weight(mm/in) (mm/in) (l/min / GPM) (°) (kg/lbs) pressure (bar/psi) excavator (t/lbs)
PLB 300 300 / 11.81 0 - 100 / 0 - 3.94 40 - max. 75 / 10.57 - max. 19.82 135 330 / 726 180 - 250 /
2016 - 43203 - 6 /
6600 - 13200
PLB 450 450 / 17.72 0 - 150 / 0 - 5.91 75 - max. 140 / 19.82 - max. 36.99 130 650 / 1430 180 - 250 /
2016 - 43206 - 12 /
13200 - 26400
PLB 600 600 / 23.62 0 - 150 / 0 - 5.91 100 - max. 200 / 25.81 - max. 52.84 120 950 / 2090 180 - 300 /
2016 - 432012 - 18 /
26400 - 39600
Requirements of Excavator
One hydraulic circuit neededOperating Pressure STF: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow STF: 60 - max. 200 l/min / 15.85 - max. 52.84 GPM
Pictures
Disc GrinderSTF 15100
STF
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany43
2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t
The SKB Sweeper Roller is the perfect tool for levelling slopes, lawns, gravelled areas, etc. Available for loaders as well. The ROB Rotor Brush is used to clean smaller areas or to level gravel etc. For excavators from 1t / 2200 lbs up to 20t / 44000 lbs operating weight.SKB:l Wide range of widths: 1000 mm / 39.37 in - 3000 mm / 118.11 in available, equipped
with 300 mm / 11.81 in bristles.l Efficiency: can be equipped with different brushes for different applications. The same frame
can be used for different rollers. l Bristles level slopes, lawns, gravelled areas, etc.ROB:l Flexible: different brushes available (steel or synthetic bristles, rubber hoses) for all jobs. Cleaning
and flattening smaller areas or levelling loose materials such as gravel, ballast, ballast, etc. l Optional rubber guard: if used in the public in narrow areas, you can use the brush with a rubber
guard for additional security. Can be mounted on either side.l Different couplings available. l Low oil consumption.
SKB / ROBSweeper Roller / Rotor Brush
Sweeper Rollers SKB
Type Bristle Sweep Weight Width Height Depthlength diameter
(mm/in) (mm/in) (kg/lbs) (mm/in) (mm/in) (mm)SKB 10 300 / 11.81 900 / 35.43 280 / 616 1000 / 39.37 1200 / 47.24 1200 / 47.24SKB 15 300 / 11.81 900 / 35.43 330 / 726 1500 / 59.06 1200 / 47.24 1200 / 47.24SKB 20 300 / 11.81 900 / 35.43 380 / 836 2000 / 78.74 1200 / 47.24 1200 / 47.24SKB 26 300 / 11.81 900 / 35.43 420 / 924 2600 / 102.36 1200 / 47.24 1200 / 47.24SKB 30 300 / 11.81 900 / 35.43 475 / 1045 3000 / 118.11 1200 / 47.24 1200 / 47.24
Package consists of: sweeper roller
Rotor Brush ROB
Type Sweep Weight Lengthdiameter(mm/in) (kg/lbs) (mm/in)
ROB 20 900 / 35.43 170 / 374 1600 / 62.99
Package consists of: rotor brush
Requirements of Excavator
One hydraulic circuit needed Operating Pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: SKB: 40 - max. 150 l/min / 10.57 - max. 39.63 GPM ROB: 30 - max. 60 l/min / 7.93 - max. 15.85 GPM
Pictures
SKB
ROB
ROB with plastic bristles
ROB with rubber hoses for ballast
ROB with steel bristles
Snow Sweeper
Exchangeable: plastic bristles for SKB 26
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany44
6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t
SKS Bucket SweeperThe SKS Bucket Sweepers are the perfect tools for flattening and carrying surplus materials from slopes, lawns, gravelled surfaces, etc. Equipped with a ballast sweeper, ballast areas and routes can easily be flattened and cleaned up. Shovel and broom function: Surplus materials like asphalt pieces or waste like trunk chips can be taken away by means of the integrated bucket. Also available for loaders. l Different widths available: 1500 mm / 59.06 in - 3000 mm / 118.11 in,
furnished with a bristle diamter of 915 mm / 36.02 in.l Other sizes and models available.l Efficient: can be furnished with different bristles for different jobs. For
example with rubber pipes or optionally with additional lateral rotor brush.
l Integrated bucket: picks up surplus material and waste.l Flexible: not only available for loaders, but as a combination for loaders
and excavators too. Also available with rubber hoses for ballast.
Exchangeable:SKS with plastic
bristles or rubber hoses
SKS with rubber hoses
Bucket Sweeper SKS
Type Bristle Weight Width Bucket Operatingdiameter volume weight
NEW TYPES (mm/in) (kg/lbs) (mm/in) (l/c.y.) (max. t/lbs)SKS 15 915 / 36.02 330 / 726 1500 / 59.06 415 / 0.54 <18 / 39600SKS 20 915 / 36.02 500 / 1100 2000 / 75.74 460 / 0.60 <22 / 48400SKS 26 915 / 36.02 650 / 1430 2600 / 102.36 700 / 0.92 <22 / 48400SKS 30 915 / 36.02 760 / 1672 3000 / 118.11 745 / 0.97 <24 / 52800
Package consists of: bucket sweeper
Requirements of ExcavatorOne hydraulic circuit neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 60 - max. 200 l/min / 15.85 - max. 52.84 GPMDifferent couplings available
Pictures
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany45
...1 t 5 t ... 10 t ... 25 t ... 30 t ... 40 t ... 50 t 60 t
Frost RipperThe TJR Frost and Ice Ripper is the ideal tool to break and crush stones, frozen soil or ice. Available for excavators with 1t / 2200 lbs - 40t / 88000 lbs operating weight.
l Robust design: no protruding parts, stable construction.l Exchangeable tooth tip as wear part.l Different couplings available. l Wide range of sizes and operating weights.
TJR
Frost and Ice Ripper TJR
Type Depth Thickness Weight Tooth Excavator operating weight
(mm/in) (mm/in) (kg/lbs) (t/lbs)TJR 2 400 / 15.75 30 / 1.18 25 / 55 CAT 1 - 2 / 2200 - 4400TJR 4 500 / 19.69 50 / 1.97 50 / 110 CAT 2 - 4 / 4400 - 8800TJR 6 600 / 23.62 50 / 1.97 75 / 165 CAT 4 - 6 / 8800 - 13200TJR 8 700 / 27.56 50 / 1.97 100 / 220 CAT 6 - 8 / 13200 - 17600TJR 12 700 / 27.56 70 / 2.76 160 / 352 CAT 8 - 12 / 17600 - 26400TJR 14 900 / 35.43 70 / 2.76 250 / 550 CAT 12 - 14 / 26400 - 30800TJR 20 1000 / 39.37 100 / 3.94 290 / 638 CAT 14 - 20 / 30800 - 44000TJR 24 1000 / 39.37 100 / 3.94 390 / 858 CAT 20 - 24 / 44000 - 52800TJR 30 1200 / 47.24 130 / 5.12 400 / 880 CAT 24 - 30 / 52800 - 66000TJR 35 1200 / 47.24 130 / 5.12 500 / 1100 CAT 30 - 35 / 66000 - 77000 TJR 40 1400 / 55.12 130 / 5.12 800 / 1760 CAT 35 - 40 / 77000 - 88000
Package consists of: ripper tooth, tooth tip, standard suspension for nordic style coupling
Note: adapters for quick exchange systems from other manufacturers available
Pictures
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany46
Additional and Small Parts
KM 381 09
KM 680
KM 685 06 hook
KM 685 05
KM 685 08
KM 685 07
KM 681
Accessories
Type Description
KM 381 09 720 compression rails, length 720 mm / 28.35 in
KM 381 09 1000 compression rails, length 1000 mm / 39.37 in
KM 685 05* adapter for compression rails for different grabs(Load capacity max. 250 kg)
KM 680 1t-4t* scraper
KM 680 5t-8t* scraper
KM 680 9t-12t* scraper
KM 680 C12VE/18VE* scraper for C12VE and C18VE
KM 680 C25VE* scraper for C25VE
KM 681 800 bolt-on shells for R12H, volume 225 l / 0.29 c.y.
KM 681 1000 bolt-on shells for R12H, volume 275 l / 0.36 c.y.
KM 682 shell support for easy mounting of shells for R12H
KM 685 06 hook welded hook
KM 685 06 hook set 2 welded hooks, set with 2 pieces
KM 685 07 set* wear plates (set)
KM 685 08 extension for excavating – 450 mm / 17.72 in (60 kg / 132 lbs)
KM 685 09 E bolt-on side plates
KM 685 10 retrofitted plate to close backside for handling of small material
KM 980-2 2t-8t solenoid valve, up to 26 MPa (260 bar) / 3744 psi for self installation
KM 980-2 2t-8t c solenoid valve, up to 26 MPa (260 bar) / 3744 psi incl. parts and installation
* please specify width of grab when ordering
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany47
Accessories for Cardanic Mounting of GrabsKM 501 – Upper Suspension without Pendulum Damper
When ordering please specify excavator modelUpper
Type Operating weight For rotator type connectionof excavator (width x pin-Ø)
(t/lbs) (mm/in)KM 501 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 501 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 501 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 501 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 501 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / integrated rotator* 180x70 / 7.09x2.76
* integrated rotation with cardanic suspension for C40/60/80H, P22V, P25VR HD, P30/40/51VHD and T30VHD
KM 511 – Upper Suspension with Pendulum Damper (can be retrofitted)
When ordering please specify excavator modelUpper
Type Operating weight For rotator type connectionof excavator (width x pin-Ø)
(t/lbs) (mm/in)KM 511 1t-8t 1 - 8 / 2200 - 17600 KM 04 F / KM 04 F140-30V / KM 04 F140-30US 84x30 / 3.31x1.18KM 511 6t-12t 6 - 12 / 13200 - 26400 KM 06 F140-40 / KM 07 F180-40 84x40 / 3.31x1.57KM 511 9t-12t 9 - 12 / 19800 - 26400 KM 10 F275-50 110x50 / 4.33x1.97KM 511 13t-25t 13 - 25 / 28600 - 55000 KM 10 F275-60 125x60 / 4.92x2.36KM 511 19t-60t 19 - 60 / 41800 - 132000 KM 15 F340-70 / KM 15 F273-70 / integrated rotator* 180x70 / 7.09x2.76
* integrated rotation with cardanic suspension for C40/60/80H, P22V, P25VR HD, P30/40/51VHD and T30VHD
Adapter for Lehnhoff Grab Exchange System for Cardanic Mounting (without suspension)
Type Suitable for Operating weight of excavatorLehnhoff quick exchange system
(t/lbs)SW01 cardanic MS01 up to 2 / 4400SW03 cardanic MS03 up to 5 / 11000SW08 cardanic MS08 up to 12 / 26400SW10 cardanic MS10 up to 19 / 41800SW21 cardanic MS21 up to 28 / 61600SW25 cardanic MS25 up to 40 / 88000SW40 cardanic MS40 up to 70 / 154000
Please note: adapter for quick exchange systems from other manufacturers available
Technical Drawings
Grab with cardanic suspension Grab with cardanic suspension and quick exchange system
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany48
Accessories for Rigid Mounting of GrabsAdapter for Rigid Mounting (incl. pins and mounting bolts)
Type
Operating weight of excavator
(t/lbs)KM 690 2t up to 2 / 4400KM 690 8t up to 8 / 17600KM 690 15t up to 15 / 33000KM 690 20t up to 20 / 44000KM 690 27t up to 27 / 59400KM 690 32t up to 32 / 70400KM 690 40t up to 40 / 88000KM 690 50t up to 50 / 110000KM 690 70t up to 70 / 154000
Adapter for Specific Solutions (incl. mounting bolts)
Type
Operating weight of excavator
(t/lbs)KM 691 2t up to 2 / 4400KM 691 8t up to 8 / 17600KM 691 15t up to 15 / 33000KM 691 20t up to 20 / 44000KM 691 27t up to 27 / 59400
Bolt-on Adapter for Lehnhoff Grab Exchange System for Rigid Mounting (incl. mounting bolts)
Type suitable for Operating weight of excavatorLehnhoff quick change system
(t/lbs)SW01 rigid MS01 up to 2 / 4400SW03 rigid MS03 up to 5 / 11000SW08 rigid MS/HS 08 up to 12 / 26400SW10 rigid MS/HS 10 up to 19 / 41800SW21 rigid MS/HS 21 up to 28 / 61600SW25 rigid MS/HS 25 up to 40 / 88000SW40 rigid HS40 up to 70 / 154000SW100 rigid HS100 up to 120 / 264000
Bolt-on Adapter for Oilquick Grab Exchange System for Rigid Mounting
Type suitable for Operating weight of excavatorOilquick quick change system
(t/lbs)OQ45 OQ45 5 – 12 / 11000 - 26400OQ60 OQ60 12 – 18 / 26400 - 39600OQ65 OQ65 14 – 22 / 30800 - 48400OQ70 OQ70 15 – 28 / 33000 - 61600OQ70/55 OQ70/55 18 – 28 / 39600 - 61600OQ80 OQ80 45 – 70 / 99000 - 154000
Note: Adapters for quick-exchange-systems from other manufacturers also available
Technical Drawings
Grab with adapter for rigid mounting Grab with adapter for quick exchange system for rigid mounting
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany49
KM 04 F KM 04 F-USE KM 06 F140-40 KM 10 F275-50 KM 15 F273/273
KINSHOFER is a manufacturer of rotators for excavators, truck loaders and logging operations. Many years of experience in designing rotators and hydraulic load handling equipment allow the production of very efficient and long lasting rotators, specially tailored to each operational requirement.
l Wide range: depending on the usage and carrier unit the load capacity – up to 15t / 33000 lbs – and the design – a rotator with flange or with shaft is possible to use.
l ”Gear-type“-design: ensures very compact and powerful rotators. Precise control of approach and stop – even at a high oil temperature.
l Endless rotation with integrated oil ducts for one hydraulic circuit as standard; rotators with four oil passages are also available.
l The pressure relief valve allows the rotator independence from the hydraulic system of the excavator and prevents overstressing.l Safe admission of pressure, move and bending load through big dimensioned roller bearings.l Minimization of abrasion: by using high quality tempered steel, the outer surface is hardened through a nitrate-coating.
KINSHOFER Rotator Line
Product Range Rotators
Type Load capacity Hole pattern Torque Moment ofdeflection max.
Hydraulic connection Weight(width x Ø of pin) Rotator Grab
(kg/lbs) (mm/in) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 04 F140-30USE 4500 / 9900 84 x 30 / 3.31 x 1.18 1000 / 740 8500 / 6270 M 18x1,5 M 18x1,5 31 / 68KM 04 F140-30VE 4500 / 9900 84 x 30 / 3.31 x 1.18 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 26 / 57KM 06 F140-40 6000 / 13200 84 x 40 / 3.31 x 1.57 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F180-40 7000 / 15400 84 x 40 / 3.31 x 1.57 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 76 / 167KM 10 F173-45E 10000 / 22000 100 x 45 / 3.94 x 1.77 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 65 / 143KM 10 F173-52E 10000 / 22000 136 x 52,2 / 5.35 x 2.06 2000 / 1475 12000 / 8850 G 1/2“ G 1/2“ 69 / 152KM 10 F180-50 10000 / 22000 110 x 50 / 4.33 x 1.97 2000 / 1475 15000 / 11065 G 1/2“ M 27x2 78 / 172
Product Range Rotators Without Head Plates
Type Load capacity Torque Moment ofdeflection max
Hydraulic connection WeightRotator Grab
(kg/lbs) (Nm/ft.lbs) (Nm/ft.lbs) (kg/lbs)KM 04 F140/150 4500 / 9900 850 / 630 3000 / 2215 M 18x1,5 M 18x1,5 34 / 75KM 06 F 140/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 38 / 84KM 06 F173/180 6000 / 13200 1000 / 740 8500 / 6270 G 1/2“ G 1/2“ 34 / 75KM 07 F275/180 7000 / 15400 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 10 F173/180 10000 / 22000 2000 / 1475 12000 / 8850 G 1/2“ M 27x2 60 / 132KM 10 F275/180V 10000 / 22000 2000 / 1475 14000 / 10325 G 1/2“ G 3/4“ 73 / 161KM 15 F340/220 15000 / 33000 3000 / 2215 25000 / 18440 G 1/2“ G 3/4“ 160 / 352KM 15 F273/273 15000 / 33000 2000 / 1475 50000 / 36875 G 1/2“ G 3/4“ 71 / 156
Head Plates for Rotators
Type Type of rotator Load capacity Width of eye Pin diameter(kg/lbs) (mm/in) (mm/in)
KM 692 4t-6t 30 KM 04 F140/150 4500 / 9900 84 / 3.31 30 / 1.18KM 692 4t-6t 40 KM 06 F173/180 6000 / 13200 84 / 3.31 40 / 1.57KM 692 7t-10t 40 KM 07 F275/180 7000 / 15400 84 / 3.31 40 / 1.57KM 692 7t-10t 50 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 110 / 4.33 50 / 1.97KM 692 7t-10t 60 KM 10 F173/180 - KM 10 F275/180 10000 / 22000 125 / 4.92 60 / 2.36KM 692 15t 70 273 KM 15 F273/273 15000 / 33000 180 / 7.09 70 / 2.76KM 692 15t 70 340 KM 15 F340/220 15000 / 33000 180 / 7.09 70 / 2.76
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany50
Robust grabs for excavators with revolutionary exchange system in a single device. As a new demand on site arises, the attachment can be exchanged and the new application can commence. Easy remounting of shells for excavating, landscaping, laying pipes, logging, rail track handling etc.
l Efficiency: only the shells are replaced; exchange is possible with only one person.l Fastness: easy exchange of the lynch pin from the change-over system
within 4 minutes, no hydraulic work necessary.l Robust technics: compact design through the integrated rotator. Robust shell
bearing with coexisting change mechanism.
Clamshell buckets with exchangeable shells are available for:l excavators up to 8t/17600 lbs: C08VE/ T08VE/ R08VE and other exchangeable shellsl excavators up to 12t/26400 lbs: C12VE/ T12VE/ R12VE and other exchangeable shellsl excavators up to 18t/39600 lbs: C18VE/ T18VE/ R18VE and other exchangeable shellsl excavators up to 25t/55000 lbs: C25VE and other exchangeable shells
C-VE
Clos
e bu
cket
and
set
it d
own.
M
ount
the
exch
ange
su
ppor
t.
Start
Rem
ove
the
lync
h pi
n fr
om
the
chan
ge-o
ver s
yste
m0.58min.
Rem
ove
the
chan
ge-o
ver p
in
with
ext
ract
ion
tool
.
1.67min.
Posit
ion
the
buck
et c
arrie
r ove
r th
e ne
w a
ttac
hmen
t and
clo
se
the
lock
ing
unit
hydr
aulic
ally
.
2.50min.
Inse
rt th
e ch
ange
-ove
r pin
and
fa
sten
the
lync
h pi
n.
3.75min.
Rem
ove
the
exch
ange
su
ppor
t. Re
ady
for u
se!4 min.
finished!
Kinshofer Exchangeable Shell System
Rock Grab
Pipe Grab
Timber Grab
Clamshell Bucket
Multi Purpose Grab
Well Shaft Grab
Operating Module
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany51
The bucket shells of the HPXdrive are bolted to the shafts, and therefore it is very easy to replace them with another set of shells. Different types of shells for different applications can be refitted onto the driving unit, e.g. clamshell bucket, rock grab, timber grab, hay and forestry grab and multi purpose clamshell. Other types of shells are available on request.
The interchangeable shells are delivered with an exchange aid that guarantees that the HPXdrive can be positioned with ease.
Exchangeable Shells
Package: exchangeable shells, bolt-on teeth (for clamshell buckets), exchanging support
HPXdrive
Please note: The KINSHOFER HPXdrive shells can only be used in combination with KINSHOFER rotator and drive unit HPXdrive
Type Operating Width Volume Numberof teeth
Self weight Load weight capacity(t/lbs) (mm/in) (liter/c.y.) (kg/lbs) (kg/lbs)
Exchangeable Shells for Clamshell Bucket
C05HPX-40S 3 - 5 / 6600 - 11000 400 / 15.75 115 / 0.15 4 100 / 220 3000 / 6600C05HPX-45S 3 - 5 / 6600 - 11000 450 / 17.72 130 / 0.17 4 125 / 275 3000 / 6600C05HPX-50S 3 - 5 / 6600 - 11000 500 / 19.69 140 / 0.18 4 130 / 286 3000 / 6600C05HPX-60S 3 - 5 / 6600 - 11000 600 / 23.62 170 / 0.22 6 145 / 319 3000 / 6600C05HPX-80S 3 - 5 / 6600 - 11000 800 / 31.50 230 / 0.30 6 180 / 396 3000 / 6600
C08HPX-40S 5 - 8 / 11000 - 17600 400 / 15.75 145 / 0.19 4 110 / 242 3000 / 6600C08HPX-45S 5 - 8 / 11000 - 17600 450 / 17.72 160 / 0.21 4 135 / 297 3000 / 6600C08HPX-50S 5 - 8 / 11000 - 17600 500 / 19.69 180 / 0.24 4 145 / 319 3000 / 6600C08HPX-60S 5 - 8 / 11000 - 17600 600 / 23.62 220 / 0.29 6 150 / 330 3000 / 6600C08HPX-80S 5 - 8 / 11000 - 17600 800 / 31.50 300 / 0.39 6 195 / 429 3000 / 6600
Exchangeable Shells for Demolition and Sorting Grab
D03HPX-40S 3 / 6600 400 / 15.75 60 / 0.08 - 70 / 154 1000 / 2200D05HPX-50S 3 - 5 / 6600 - 11000 500 / 19.69 100 / 0.13 - 120 / 264 1000 / 2200D09HPX-60S 5 - 9 / 11000 - 19800 600 / 23.62 150 / 0.20 - 140 / 308 1000 / 2200
Exchangeable Shells for Multi Purpose Grab
A05HPX-40S 3 - 5 / 6600 - 11000 400 / 15.75 100 / 0.13 3 135 / 297 1000 / 2200A09HPX-50S 5 - 9 / 11000 - 19800 500 / 19.69 200 / 0.26 5 205 / 451 2500 / 5500
Exchangeable Shells for 3-Finger Timber Grab
T05HPX-3ZS 3 - 5 / 6600 - 11000 375 / 14.76 - - 95 / 209 1000 / 2200T09HPX-3ZS 5 - 9 / 11000 - 19800 375 / 14.76 - - 95 / 209 2000 / 4400
Exchangeable Shells for Rock Grab
R05HPX-0,16S 3 - 5 / 6600 - 11000 400 / 15.75 0,16 m2 / 0.11 cords - 70 / 154 1000 / 2200R08HPX-0,16S 5 - 8 / 11000 - 17600 400 / 15.75 0,16 m2 / 0.11 cords - 70 / 154 1000 / 2200
We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany52
EXA
-KIN
-CO
N-E
-011
5
Upfront, everywhereKINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.
www.kinshofer.com
Hauptsitz Deutschland: Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: info@kinshofer.comwww.kinshofer.com
United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: sales@kinshofer.co.ukwww.kinshofer.com
France: Kinshofer France S.A.R.L.B.P. 20100F-67213 Obernai CedexTel.: +33(0) 3 88 39 55 00Fax: +33(0) 3 88 79 06 75Email: sales-france@kinshofer.comwww.kinshofer.com
Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: sales-northamerica@kinshofer.comwww.kinshofer.com
United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525www.kinshofer.com
中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: info@darda.com.cnwww.darda.com.cn
Suomi: Kinshofer Finland OyRealparkinkatu 9,FI-37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)3 6870 466Email: sales-finland@kinshofer.comwww.kinshofer.com
Sverige: RF System AB Furutorpsgatan 6SE-288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: info@rf-system.sewww.rf-system.se